UNE 15-304-1990 《可变高度桌子的控制台铣床，带水平或垂直螺旋轴 精准度控制》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M2G329-A-2007 ADHESIVE EPOXY SOLVENT FREE 180 DEGREES C CURING 80 DEGREES C APPLICABLE METAL METAL STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A 《结构用金属 金属最高固化温度180℃、最高工.pdf

FORD WSK-M2G329-A2-2007 ADHESIVE EPOXY SOLVENT FREE 180 DEGREES C CURING 80 DEGREES C APPLICABLE METAL METAL STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M2G329-A.pdf

FORD WSK-M2G329-A3-2007 ADHESIVE EPOXY SOLVENT FREE 180 DEGREES C CURING 60 DEGREES C APPLICABLE METAL METAL STRUCTURAL TO BE USED WITH FORD WSS-M99P-1111A (Shown on WSK-M2G329-A.pdf

FORD WSK-M2G330-A-2009 ADHESIVE EPOXY STRUCTURAL METAL-TO-METAL 180 DEGREE C CURING SPRAYABLE PRECURABLE HEM FLANGE TO BE USED WITH FORD WSS-M99P1111-A 《折边凸缘用预固化、可喷施、最高固化温度180℃的金.pdf

FORD WSK-M2G330-A2-2009 ADHESIVE EPOXY PVC BLEND STRUCTURAL METAL-TO-METAL 180 DEGREE C CURING SPRAYABLE PREGELLABLE HEM FLANGE LOW VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M2G330-A3-2009 ADHESIVE EPOXY PVC BLEND STRUCTURAL METAL-TO-METAL 180 DEGREE C CURING SPRAYABLE PREGELLABLE HEM FLANGE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD.pdf

FORD WSK-M2G330-A4-2009 ADHESIVE EPOXY PVC BLEND STRUCTURAL METAL-TO-METAL 180 DEGREE C CURING SPRAYABLE PREGELLABLE HEM FLANGE CONTAINS GLASSBEADS TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSK-M2G330-A4-2015 ADHESIVE EPOXY PVC BLEND STRUCTURAL METAL-TO-METAL 180 DEGREE C CURING SPRAYABLE PREGELLABLE HEM FLANGE CONTAINS GLASSBEADS TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSK-M2G342-A-2009 ADHESION PROMOTER SILANE TO BE USED WITH FORD WSS-M99P1111-A 《硅烷增粘剂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M5B280-C5 FORD WSS-M5B280-C5］》.pdf