UNE 37-153-1986 《铜C-1130 冷拉伸无焊接用于制冷和空调的圆管测量，允差，机械和电力特点以及供应的技术特点》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 86292-2014 Ships and marine technolgy - Waste water treatment plants - Methods of sampling《船舶和海洋技术 污水处理厂 采样方法》.pdf

DIN 86341-2000 Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50 up to PN 25 DN 65 t.pdf

DIN 86501-2017 Screwed bonnet type valves of gun metal with 24 connection for Type W port according to DIN 3861《符合DIN 3861的与W出口端成24度连接的炮铜制螺纹帽状阀门》.pdf

DIN 86528-2017 Tab washers for screwed bonnet type valves《螺盖阀的锁紧垫圈》.pdf

DIN 86552-2002 Valves screwed bonnet type of steel with 24-connection with port end W according to DIN 3861《符合DIN 3861的与W出口端成24度连接的钢制螺纹帽状阀门》.pdf

DIN 86720-2002 Gate valves flat sided of gun metall with screwed bonnet and flanges DN 20 to DN 100 PN 16《带螺纹的阀帽和法兰DN 20 至 DN 100、PN 16 的炮铜制楔形滑门阀》.pdf

DIN 86735-2013 Oil-water separators - Tank system for bilge water on seagoing vessels《油水分离器 远洋轮上舱底污水的水槽系统》.pdf

DIN 87101-2003 Non-return flaps (storm valves) self-closing vertical type DN 50 up to DN 150 PN 1 - Mating dimensions for flanges according to PN 10《DN为50-150、标称压力为1的垂直自闭式止回阀(止回排水阀.pdf

DIN 87151-2015 Grey cast-iron coarse filters - DN 40 to DN 200 nominal pressure PN 2 5 - Compilation and dimensions《灰铸铁粗滤器 公称内径40至200 公称压力2 5 编辑和尺寸》.pdf