IEC 60364-6-2016 Low voltage electrical installations - Part 6 Verification《低压电气设施.第6部分 检验》.pdf

上传人:testyield361 文档编号:1234414 上传时间:2019-08-24 格式:PDF 页数:104 大小:2MB
下载 相关 举报
IEC 60364-6-2016 Low voltage electrical installations - Part 6 Verification《低压电气设施.第6部分 检验》.pdf_第1页
第1页 / 共104页
IEC 60364-6-2016 Low voltage electrical installations - Part 6 Verification《低压电气设施.第6部分 检验》.pdf_第2页
第2页 / 共104页
IEC 60364-6-2016 Low voltage electrical installations - Part 6 Verification《低压电气设施.第6部分 检验》.pdf_第3页
第3页 / 共104页
IEC 60364-6-2016 Low voltage electrical installations - Part 6 Verification《低压电气设施.第6部分 检验》.pdf_第4页
第4页 / 共104页
IEC 60364-6-2016 Low voltage electrical installations - Part 6 Verification《低压电气设施.第6部分 检验》.pdf_第5页
第5页 / 共104页
点击查看更多>>
资源描述

1、 IEC 60364-6 Edition 2.0 2016-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Low voltage electrical installations Part 6: Verification Installations lectriques basse tension Partie 6: Vrification IEC 60364-6:2016-04(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Gen

2、eva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in

3、the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication c

4、ontraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des question

5、s sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 i

6、nfoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publi

7、cations is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC Internationa

8、l Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,

9、). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.ele

10、ctropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/g

11、lossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/cs

12、c If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour

13、 tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC -

14、webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www

15、iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez

16、inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfini

17、tions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des artic

18、les Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions cont

19、actez-nous: csciec.ch. IEC 60364-6 Edition 2.0 2016-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Low voltage electrical installations Part 6: Verification Installations lectriques basse tension Partie 6: Vrification INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONA

20、LE ICS 91.140.50 ISBN 978-2-8322-3347-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous

21、avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 60364-6:2016 IEC 2016 CONTENTS FOREWORD . 4 6.1 Scope . 6 6.2 Normative references 6 6.3 Terms and definitions 7 6.4 Initial verification . 7 6.4.1 General . 7 6.4.2 Inspection 8 6.4.3 Testing 9 6.4.4 Reporting for initial ve

22、rification . 14 6.5 Periodic verification . 15 6.5.1 General . 15 6.5.2 Frequency of periodic verification . 16 6.5.3 Reporting for periodic verification . 16 Annex A (informative) Estimation of the resistance value likely to be obtained during continuity testing . 18 Annex B (informative) Methods f

23、or measuring the insulation resistance/impedance of floors and walls to earth or to the protective conductor . 19 B.1 General . 19 B.2 Test method for measuring the impedance of floors and walls with a.c. voltage 19 B.3 Test electrode 1 20 B.4 Test electrode 2 20 Annex C (informative) Measurement of

24、 earth electrode resistance Methods C1, C2 and C3 . 22 C.1 Method C1 Measurement of earth electrode resistance using an earth electrode test instrument . 22 C.2 Method C2 Measurement of earth electrode resistance using a fault loop impedance test instrument . 23 C.3 Method C3 Measurement of earth el

25、ectrode resistance using current clamps 24 Annex D (informative) Guidance on the application of the rules of Clause 6.4 Initial verification 26 Annex E (informative) Model forms for reporting . 29 Annex F (informative) Model forms for inspection of electrical installations 36 F.1 Model schedule for

26、items requiring inspection for initial verification of an electrical installation. . 36 F.2 Model inspection schedule of items requiring inspection for an existing electrical installation 40 Annex G (informative) Model schedule of circuit details and test results 45 Annex H (informative) List of not

27、es concerning certain countries . 46 Bibliography . 48 Figure B.1 Test electrode 1 20 Figure B.2 Test electrode 2 21 Figure C.1 Measurement of the earth electrode resistance 23 Figure C.2 Measurement of the earth electrode resistance using an earth fault loop impedance test instrument 24 Figure C.3

28、Measurement of earth electrode resistance using current clamps . 25 IEC 60364-6:2016 IEC 2016 3 Table 6.1 Minimum values of insulation resistance 10 Table A.1 Specific conductor resistance R for copper wiring at 30 C dependent on the nominal cross-sectional area S for rough calculation of conductor

29、resistances 18 Table E.1 Electrical installation verification report (new or altered installation) 29 Table E.2 Electrical installation condition report (existing installations) 32 Table G.1 Model schedule of circuit details and test results 45 4 IEC 60364-6:2016 IEC 2016 INTERNATIONAL ELECTROTECHNI

30、CAL COMMISSION _ LOW VOLTAGE ELECTRICAL INSTALLATIONS Part 6: Verification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote in

31、ternational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (herea

32、fter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also part

33、icipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, a

34、n international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all

35、 reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to app

36、ly IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of

37、conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this pub

38、lication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect

39、 or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the co

40、rrect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60364-6 has been prepared

41、 by the IEC technical committee 64: Electrical installations and protection against electric shock. This second edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the

42、 previous edition: a) Normative references updated to current publications; b) Re-numbered to align with current IEC numbering; c) Initial inspection requirements: 3 items added; d) Testing sequence changed; e) General requirements for periodic reporting more details added; f) New Annex A: Table A.1

43、 Specific resistance values for copper conductors; IEC 60364-6:2016 IEC 2016 5 g) Annex D: Example of a diagram suitable for evaluation of voltage drop. Content removed; h) Annex E: Recommendation for electrical equipment which is being re-used in an electrical installation. Content removed; i) Anne

44、x F: Content replaced with new Annex E Model forms for reporting; j) Annex G: Changed to Annex F Model forms for inspection of electrical installations; k) Annex H: Changed to Annex G Model schedule of circuit details and test results; l) Annex H: Listing of notes concerning some countries; m) Bibli

45、ography Updated: The text of this standard is based on the following documents: FDIS Report on voting 64/2107/FDIS 64/2114/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in acco

46、rdance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60364 series, published under the general title Low voltage electrical installations, can be found on the IEC website. The readers attention is drawn to the fact that Annex H lists all of the “in-some-country” clauses on diff

47、ering practices of a less permanent nature relating to the subject of this standard. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publicat

48、ion. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Use

49、rs should therefore print this document using a colour printer. 6 IEC 60364-6:2016 IEC 2016 LOW VOLTAGE ELECTRICAL INSTALLATIONS Part 6: Verification 6.1 Scope This part of IEC 60364 provides requirements for initial and periodic verification of an electrical installation. Clause 6.4 provides requirements for initial verification, by inspection and testing, of an electrical installation t

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
  • SIS SS-ISO 3222-1991 Aerospace  Nuts anchor self-locking fix- ed closed corner reduced series with counterbore with MJ threads coated or un- coated classification 1100 MPa 235 C 11.pdf SIS SS-ISO 3222-1991 Aerospace Nuts anchor self-locking fix- ed closed corner reduced series with counterbore with MJ threads coated or un- coated classification 1100 MPa 235 C 11.pdf
  • SIS SS-ISO 3223-1991 Aerospace  Nuts anchor self-locking fixed two-lug with counterbore with MJ threads coated or uncoated classification 1100MPa 235C 1100 MPa 315 C or 1100 MPa 42.pdf SIS SS-ISO 3223-1991 Aerospace Nuts anchor self-locking fixed two-lug with counterbore with MJ threads coated or uncoated classification 1100MPa 235C 1100 MPa 315 C or 1100 MPa 42.pdf
  • SIS SS-ISO 3224-1987 Aerospace - Self-locking floating single-lug anchor nuts with counter- bore classification 1100 MPa 235 C《航空航天 带沉孔的自锁、浮动、单耳系紧螺母,分类1100 MPa 235 C》.pdf SIS SS-ISO 3224-1987 Aerospace - Self-locking floating single-lug anchor nuts with counter- bore classification 1100 MPa 235 C《航空航天 带沉孔的自锁、浮动、单耳系紧螺母,分类1100 MPa 235 C》.pdf
  • SIS SS-ISO 3225-1986 Aerospace - Self-locking fixed two lug anchor nuts reduced series with counterbore strength classification 1100 MPa and maximum operating temperature 235 C《航空航.pdf SIS SS-ISO 3225-1986 Aerospace - Self-locking fixed two lug anchor nuts reduced series with counterbore strength classification 1100 MPa and maximum operating temperature 235 C《航空航.pdf
  • SIS SS-ISO 3248-1989 Paints and varnishes  Determination of the effect of heat《油漆和清漆 高温影响的测定》.pdf SIS SS-ISO 3248-1989 Paints and varnishes Determination of the effect of heat《油漆和清漆 高温影响的测定》.pdf
  • SIS SS-ISO 3253-1984 Hose connections for equipment for welding cutting and related processes《用于焊接、切割和相关流程的设备的软管连接装置》.pdf SIS SS-ISO 3253-1984 Hose connections for equipment for welding cutting and related processes《用于焊接、切割和相关流程的设备的软管连接装置》.pdf
  • SIS SS-ISO 3264-1982 Continuous mechanical handling equip- ment for loose bulk materials - Screw feeders and conveyors - Safety code《散货材料持续性机械搬运设备 螺旋输送机 安全规范》.pdf SIS SS-ISO 3264-1982 Continuous mechanical handling equip- ment for loose bulk materials - Screw feeders and conveyors - Safety code《散货材料持续性机械搬运设备 螺旋输送机 安全规范》.pdf
  • SIS SS-ISO 3267-1992 Road vehicles  Headlamp cleaners《道路车辆 照明灯清洁器》.pdf SIS SS-ISO 3267-1992 Road vehicles Headlamp cleaners《道路车辆 照明灯清洁器》.pdf
  • SIS SS-ISO 3268-1990 Plastics  Glass-reinforced materials  Determination of tensile properties《塑料 玻璃钢材料 拉伸性能的测定》.pdf SIS SS-ISO 3268-1990 Plastics Glass-reinforced materials Determination of tensile properties《塑料 玻璃钢材料 拉伸性能的测定》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1