IEC 61834-4 AMD 1-2010 Recording - Helical-scan digital video cassette recording system using 6 35 mm magnetic tape for consumer use (525-60 625-50 1125-60 and 1250-50 systems) - P.pdf

上传人:proposalcash356 文档编号:1236856 上传时间:2019-08-24 格式:PDF 页数:48 大小:2MB
下载 相关 举报
IEC 61834-4 AMD 1-2010 Recording - Helical-scan digital video cassette recording system using 6 35 mm magnetic tape for consumer use (525-60 625-50 1125-60 and 1250-50 systems) - P.pdf_第1页
第1页 / 共48页
IEC 61834-4 AMD 1-2010 Recording - Helical-scan digital video cassette recording system using 6 35 mm magnetic tape for consumer use (525-60 625-50 1125-60 and 1250-50 systems) - P.pdf_第2页
第2页 / 共48页
IEC 61834-4 AMD 1-2010 Recording - Helical-scan digital video cassette recording system using 6 35 mm magnetic tape for consumer use (525-60 625-50 1125-60 and 1250-50 systems) - P.pdf_第3页
第3页 / 共48页
IEC 61834-4 AMD 1-2010 Recording - Helical-scan digital video cassette recording system using 6 35 mm magnetic tape for consumer use (525-60 625-50 1125-60 and 1250-50 systems) - P.pdf_第4页
第4页 / 共48页
IEC 61834-4 AMD 1-2010 Recording - Helical-scan digital video cassette recording system using 6 35 mm magnetic tape for consumer use (525-60 625-50 1125-60 and 1250-50 systems) - P.pdf_第5页
第5页 / 共48页
点击查看更多>>
资源描述

1、 IEC 61834-4 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 4: Pack header table and contents Enregistrement Systme denregis

2、trement numrique grand public vido cassette balayage hlicodal pour la bande magntique de 6,35 mm (systmes 525-60, 625-50, 1125-60 et 1250-50) Partie 4: Tableaux des paquets en-tte et leur contenu IEC 61834-4:1998/A1:2010 AMENDMENT 1 AMENDEMENT 1 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010

3、 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Comm

4、ittee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf ind

5、ication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez

6、 des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.

7、ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kep

8、t under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technic

9、al committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electro

10、pedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Ser

11、vice Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique I

12、nternationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous

13、 assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, c

14、omit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible

15、en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel V

16、ocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 91

17、9 02 11 Fax: +41 22 919 03 00 IEC 61834-4 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 4: Pack header table and contents E

18、nregistrement Systme denregistrement numrique grand public vido cassette balayage hlicodal pour la bande magntique de 6,35 mm (systmes 525-60, 625-50, 1125-60 et 1250-50) Partie 4: Tableaux des paquets en-tte et leur contenu INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTER

19、NATIONALE S ICS 33.160.01, 35.200 PRICE CODE CODE PRIX ISBN 978-2-88910-919-7 AMENDMENT 1 AMENDEMENT 1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61834-4 Amend. 1 IEC:2010 FOREWORD This amendment has been prep

20、ared by technical area 7: Consumer electronics storage media, data structures and equipment, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this amendment is based on the following documents: CDV Report on voting 100/1552/CDV 100/1628/RVC Full informat

21、ion on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The French version of this Amendment has not been voted upon. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the

22、 stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. _ 1.2 Normative references Insert, before IEC 61880, the following new

23、 references: IEC 61834-2:1998, Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 2: SD format for 525-60 and 625-50 systems IEC 61834-11:2008, Recording Helical-scan digital video cassette re

24、cording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 11: HDV format for 1080i and 720p systems ETS 300 468, Specification for Service Information (SI) in DVB systems 61834-4 Amend. 1 IEC:2010 3 2 Pack header table Replace the entire Table 1 b

25、y the following new Table 1: Table 1 Pack header table 4 61834-4 Amend. 1 IEC:2010 Add, after Subclause 12.16, the following new Clause 13: 13 MPEG MPEG 0 13.1 SOURCE This pack shall be recorded at least in the VAUX main area. SERVICE ID In the case of single programme recording, SERVICE ID is the s

26、ame as the program_number in the corresponding program_map_section (PMT). SOURCE CODE SOURCE CODE defines the input source of bit stream data in combination with SERVICE ID and TUNER CATEGORY, as follows. Prescribed value TUNER CATEGORY50/60 0 = 60-field system 1 = 50-field system 61834-4 Amend. 1 I

27、EC:2010 5 STYPE STYPE defines a signal type of input signal in combination with the 50/60 flag as follows. TUNER CATEGORY: TUNER CATEGORY consists of the area number and the satellite number as follows. TUNER CATEGORY = FFh is indicative of no information. Area number specification 6 61834-4 Amend.

28、1 IEC:2010 Details of the area number are to be decided. 61834-4 Amend. 1 IEC:2010 7 MPEG 1 13.2 SOURCE CONTROL This pack shall be recorded at least in the VAUX main area. CGMS: See 9.2. TPH: Higher speed trick play. TPH defines the presence or absence of the TPH stream and the number of repetitions

29、 in combination with STYPE as follows. TPL: Lower speed trick play. TPL defines the presence or absence of the TPL stream and the number of repetitions in combination with STYPE as follows. 8 61834-4 Amend. 1 IEC:2010 SS: Source and recorded situation 00b = Scrambled data and data recorded without d

30、escrambling 01b = reserved 10b = Descrambled data or originally non-scrambled data 11b = No information REC ST: Recording start point 0 = Recording start point 1 = Not recording start point The duration of the recording start point should be the period of recording 300 tracks in 25 Mbps mode. REC MO

31、DE: 00b = Original 01b = Reserved 10b = Insert 11b = Invalid recording where Original: The video and audio areas are recorded simultaneously, including the case where the audio area is “no info“ or “invalid“. Insert: The video area is recorded leaving the pre-recorded audio area as it is. Invalid re

32、cording: The recorded video data are disregarded. MR: Multi-service recording flag 0 = Multi-services have been recorded at the same time. 1 = Only one service has been recorded. HD/SD: HD/SD flag indicates the kind of video signal. 0 = SD-MPEG2 (LL or ML) 1 = HD-MPEG2 (HL or Hi-1440L) AUD MODE: AUD

33、 MODE indicates the kind of audio compression. 00b = MPEG2 audio layer 1 and 2 01b = AC-3 audio Others = Reserved HD/SD = 1 and AUD MODE = 11b only when, HD/SD and AUD MODE are meaning No information. 61834-4 Amend. 1 IEC:2010 9 MAX BIT RATE: MAX BIT RATE is a maximum bit rate of the service which i

34、s defined in the short_smoothing_buffer_descriptor (see ETS 300 468). MAX BIT RATE consists of SB_size (two bits) + SB_leak_rate (six bits) REC END: Recording end point 0 = Recording end point 1 = Not recording end point The duration of recording end point should be 1 s. GENRE CATEGORY: GENRE CATEGO

35、RY shows the category of the service. The details are described in the TIMER ACT DATE pack. MPEG 2 13.3 REC DATE This pack should be recorded in the VAUX main area. The date when the service data are recorded is stored in this pack. 10 61834-4 Amend. 1 IEC:2010 DS: Daylight saving time 0 = Daylight

36、saving time 1 = Normal REC MODE: Thirty-minute unit of the time differential from GMT 0 = 30 min 1 = 0 min TIME ZONE: 00 to 23 3Fh = No information Examples: For Tokyo TIME ZONE = 001001b PC1 = 11001001b GMT plus 9:00 For New York with daylight saving time TIME ZONE = 011001b PC1 = 01011001b GMT plu

37、s 19:00 For New Delhi, where the 30-minute unit of the time differential from GMT is adopted, TIME ZONE = 000101b PC1 = 10000101b GMT plus 5:30 where GMT is Greenwich Mean Time DAY: 01 to 31 3Fh = No information WEEK: 0 = Sunday 4 = Thursday 1 = Monday 5 = Friday 2 = Tuesday 6 = Saturday 3 = Wednesd

38、ay 7 = No information MONTH: 01 to 12 = January to December 1Fh = No information where TNMN = Tens of month 1 = Not recording end point YEAR: 00 to 99 FFh = No information 61834-4 Amend. 1 IEC:2010 11 MPEG 3 13.4 REC TIME This pack should be recorded in the VAUX main area. The time when the service

39、data are recorded is stored based on the SMPTE/EBU time code format. In the case of not recording the MPEG BINARY pack: If FRAME is not used, FRAME shall be 3Fh. In the case of recording the MPEG BINARY pack: The flags S1 to S6 shall be recorded based on the SMPTE/EBU format. 12 61834-4 Amend. 1 IEC

40、2010 MPEG 4 13.5 BINARY GROUP This pack may be recorded in the VAUX main area. If this pack is used, the flags S1 to S6 in the MPEG REC TIME pack shall be set on the basis of the SMPTE/EBU time code format. If this pack is not used, the NO INFO pack shall be recorded. MPEG 5 13.6 STREAM This pack s

41、hould be recorded in the VAUX main area. This pack is prepared to obtain PMT_PID, PCR_PID and elementary_PIDs directly without referring to PAT and PMT. STREAM TYPE: STREAM TYPE shows the type of the elementary stream. STREAM TYPE is the same as the stream_type described in the corresponding program

42、map_section (PMT). 61834-4 Amend. 1 IEC:2010 13 ELEMENTARY PID: ELEMENTARY PID shows the PID of the packet which contains the elementary stream of STREAM TYPE. ELEMENTARY PID is the same as the elementary_PID described in the corresponding program_map_section (PMT). ELEMENTARY PID also indicates PM

43、T_PID or PCR_PID in combination with PID TYPE. PID TYPE: MPEG 6 13.7 Reserved This pack is reserved for future use. 14 61834-4 Amend. 1 IEC:2010 MPEG 7 13.8 ETN SF1: Search flag 1 Search flag 1 is described in IEC 61834-11, 8.3.4. SF2: Search flag 2 Search flag 2 is described in IEC 61834-11, 8.3.4.

44、 SPH: Search phase Search phase is described in IEC 61834-11, 8.3.4. REE: REC end ECC unit REC end ECC unit is described in IEC 61834-11, 8.3.4. PT: Picture type Picture type is described in IEC 61834-11, 8.3.4. ETN: Extended track number Extended track number is described in IEC 61834-11, 8.3.4. MP

45、EG 8 13.9 TEXT HEADER 61834-4 Amend. 1 IEC:2010 15 This pack may be recorded or written in common optional areas. TDP: Total number of text data (see Figure 55 of IEC 61834-2) For tape, total number of TEXT packs which follow this pack. For MIC, total number of text data bytes which follow PC3. TEXT

46、 TYPE: 0 = Name 7 = Subtitle Dh = Two-byte coded font 1 = Memo 8 = Outline Eh = Graphic 2 = Station 9 = Full screen Fh = No information 3 = Model Ah = Teletext header Others = Reserved 6 = Operator Ch = One-byte coded font OPN: Option number OPN is the same as the option number of UK teletext. More

47、details are described in the teletext specification (EBU SPB 492). If OPN is not used, OPN shall be 111b. TEXT CODE: The TEXT CODE designates the character set. The details are described in the CONTROL TEXT HEADER pack. MPEG 9 13.10 TEXT This pack may be recorded in common optional areas on tape. Th

48、is pack contains font data, graphic data and text data according to the TEXT TYPE designated in the MPEG TEXT HEADER pack. 16 61834-4 Amend. 1 IEC:2010 MPEG 10 13.11 SERVICE START This pack may be recorded or written in common optional areas. This pack shows the tape position of the service start us

49、ing the title time code. DF: Drop-frame flag 0 = Drop-frame mode 1 = Non-drop-frame mode The drop-frame sequence shall be based on the SMPTE/EBU format. For consumer digital VCR, DF shall be 0. FRAMES: If 50/60 in the SOURCE pack is 0 then 00 to 29. If 50/60 in the SOURCE pack is 1 then 00 to 24. SECONDS: 00 to 59 MINUTES: 00 to 59 HOUR

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1