JIS C8105-1-2017 Luminaires -- Part 1 General requirements for safety《照明设备 第1部分 安全性一般要求》.pdf

相关资源

JIS C8147-2-11-2005 灯控制设备.第2-11部分：与照明设备一同使用的其它电子电路的特殊要求.pdf

JIS C8020-2005 荧光照明设备能效指数的计算方法.pdf

CB 1066.1-1987 造船电气设备工时定额 动力照明设备安装.pdf

HB 6430-1990 飞机照明设备安装通用规范.pdf

HB 6440-1990 飞机外部照明设备通用规范.pdf

GA T 488-2004 道路交通事故现场勘查车载照明设备通用技术条件.pdf

HB 6491-1991 飞机内部照明设备通用要求.pdf

TB T 3229-2010 铁路线路作业移动式照明设备.pdf

CB 1066.1-1987 造船电气设备工时定额 动力照明设备安装.pdf

GB T 22791-2008 自行车.照明设备.pdf

猜你喜欢

ASTM D6185-2010 1875 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases《润滑脂的二元混合物的相容性评估的标准实施规程》.pdf

ASTM D6185-2011 4375 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases《润滑脂二元混合物兼容性评估的标准操作规程》.pdf

ASTM D6185-2011(2017) 7500 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases《润滑脂二元混合物相容性评定的标准实施规程》.pdf

ASTM D6186-1998(2003)e1 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)《利用压差扫描量热法(PDSC)测试润滑油的氧化感应时间的标准试验方.pdf

ASTM D6186-2008 752 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)《利用压差扫描量热法(PDSC)测试润滑油的氧化感应时间的标准试验方法》.pdf

ASTM D6186-2008(2013) 2788 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)《用压差扫描量热法 (PDSC) 测试润滑油的氧化感应时间的标.pdf

ASTM D6187-1997(2003) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence《带有氮激光感应荧光的石油污染位点的.pdf

ASTM D6187-1997(2010) 8125 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence《带有氮激光感应荧光的石油.pdf

ASTM D6188-1997(2003) Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall《通过铜氨落球对纤维素黏度的标准试验方法》.pdf