MNOSZ 10163-1954 《双头单体连接玻璃头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS9725 REV C (1)-2003 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK CORROSION AND HEAT RESISTANT STEEL 3125-24 UNJF-3A《0 3125-24 UNJF-3A型防腐蚀和耐热钢最大公差垫圈顶.pdf

DLA MS9725 REV C REINST NOTICE 2-1994 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK CORROSION AND HEAT RESISTANT STEEL 3125-24 UNJF-3A《0 3125-24 UNJF-3A型防腐.pdf

DLA MS9725 REV C-1986 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK CORROSION AND HEAT RESISTANT STEEL 3125-24 UNJF-3A《0 3125-24 UNJF-3A型防腐蚀和耐热钢最大公差垫圈顶部加长双.pdf

DLA MS9727 REV C REINST NOTICE 2-1994 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK CORROSION AND HEAT RESISTANT STEEL 4375-20 UNJF-3A《0 4375-20 UNJF-3A型防腐.pdf

DLA MS9727 REV C-1986 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK CORROSION AND HEAT RESISTANT STEEL 4375-20 UNJF-3A《0 4375-20 UNJF-3A型防腐蚀和耐热钢最大公差垫圈顶部加长双.pdf

DLA MS9766 REV B (1)-2002 NUT DOUBLE HEXAGON CUPWASHER LOCKED AMS 5737 CRES《AMS 5737型 防锈钢杯状锁定垫圈双重六边螺母》.pdf

DLA MS9766 REV B VALID NOTICE 1-1994 NUT DOUBLE HEXAGON CUPWASHER LOCKED AMS 5737 CRES《AMS 5737型 防锈钢杯状锁定垫圈双重六边螺母》.pdf

DLA MS9766 REV B-1972 NUT DOUBLE HEXAGON CUPWASHER LOCKED AMS 5737 CRES《AMS 5737型 防锈钢杯状锁定垫圈双重六边螺母》.pdf

DLA MS9767 REV B REINST-1983 NUT DOUBLE HEXAGON - CUPWASHER LOCKED AMS 6322 CADMIUM PLATED MIL-S-8879《MIL-S-8879型镉板的AMS 5737型 杯状锁定垫圈双重六边螺母》.pdf