MNOSZ 13599-1954 《密度软橡胶物理测试 弹性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 51030-2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products《陶瓷原料和基本材料的测试 不烧制品的干燥弯曲强度的测定》.pdf

DIN 51032-2017 Ceramics glass glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food《陶瓷、玻璃、玻璃陶瓷 与食品接触使用的日用品中铅和镉.pdf

DIN 51043-1979 Trass Requirements Tests《粗面凝灰岩 要求 试验》.pdf

DIN 51045-1-2005 Determination of the thermal expansion of solids - Part 1 Basic rules《固体热膨胀的测定 第1部分 基本原则》.pdf

DIN 51045-2-2009 Determination of linear thermal expansion of solids - Part 2 Testing of fired fine ceramic materials using the dilatometer method《固体线性热膨胀的测定 第2部分 使用膨胀计方法测试点燃式精细陶瓷材.pdf

DIN 51045-3-2009 Determination of linear thermal expansion of solids - Part 3 Testing of non-fired fine ceramic materials using the dilatometer method《固体线性热膨胀的测定 第3部分 使用膨胀计方法测试非点燃式.pdf

DIN 51045-4-2007 Determination of linear change of solids by thermal effect using the dilatometer method - Part 4 Testing of fired heavy ceramic materials《利用膨胀计方法测定热效应引起的固体线性变化 第4部.pdf

DIN 51045-5-2007 Determination of linear change of solids by thermal effect using the dilatometer method - Part 5 Testing of non-fired heavy ceramic materials《利用膨胀计方法测定热效应引起的固体线性变化.pdf

DIN 51060-2000 Refractory ceramic raw materials and refractories - Definitions of the terms refractory high refractory《耐火陶瓷原材料和耐火产品 耐火及高级耐火材料的术语定义》.pdf