MNOSZ 17717-1954 《钢工具和钢机器的安置》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D706-A2-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D666-A)《受热稳定、冲击改性的聚酰胺66(PA66)成型料 与标准F.pdf

FORD WSK-M4D708-A-1990 POLYAMIDE (PA) 6 30% GLASS FIBER GLASS SPHERE REINFORCED《30%玻璃纤维 玻璃珠增强的聚酰胺6》.pdf

FORD WSK-M4D709-A-2009 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT AND HIGH TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《耐高温、高抗冲和抗拉强度的丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准.pdf

FORD WSK-M4D710-A-2009 ABS MOLDING COMPOUND VERY HIGH HEAT RESISTANT AND HIGH TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《极高耐高温性能和高抗拉强度的丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD .pdf

FORD WSK-M4D712-A1-2006 THERMOPLASTIC ELASTOMER (TPE) POLYOLEFIN EPDM RUBBER MODIFIED 50 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-a (Use WSS-M2D382-B1)《汽车外部用硬度为50 D.pdf

FORD WSK-M4D712-A2-2006 THERMOPLASTIC ELASTOMER (TPE) POLYOLEFIN EPDM RUBBER MODIFIED 50 DUROMETER D HARDNESS EXTERIOR (Use with WSS-M2D382-B1)《汽车外部用硬度为50 D的耐候型三元乙丙橡胶(EPDM)橡胶改性聚烯径热.pdf

FORD WSK-M4D713-A-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 6% MINERAL FILLED HIGH IMPACT PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《6%矿物填充 耐冲击可涂装的热塑性聚烯烃弹性体(TEO) 与福特WSS-.pdf

FORD WSK-M4D714-A-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27 % MINERAL FILLED COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《27%矿物填充 内部着色的热塑性聚烯烃弹性体(TEO) 与福特.pdf

FORD WSK-M4D714-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27% MINERAL FILLED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf