NB T 11012-2022 水电工程等级划分及洪水标准.pdf

相关资源

DL T 5176-2003 水电工程预应力锚固设计规范.pdf

DL T 5206-2005 水电工程预可行性研究报告编制规程.pdf

DL T 5020-2007 水电工程可行性研究报告编制规程.pdf

DL T 5376-2007 水电工程建设征地处理范围界定规范.pdf

DL T 5381-2007 水电工程水库库底清理设计规范.pdf

DL T 5382-2007 水电工程建设征地移民安置补偿费用概（估）算编制规范.pdf

DL T 1395-2014 水电工程设备铸锻件检验验收规范.pdf

DL T 5212-2005 水电工程招标设计报告编制规程.pdf

DL T 5098-2010 水电工程砂石加工系统设计规范.pdf

DL T 5105-1999 水电工程水利计算规范.pdf

猜你喜欢

ASTM D7310-2007 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors《用光学传感器进行塑料薄膜缺陷检测和评定等级用标准指南》.pdf

ASTM D7310-2011 0625 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors《用光学传感器进行塑料薄膜缺陷检测和评定等级用标准指南》.pdf

ASTM D7311-2007 781 Standard Specification for Liquid-Applied Single-Pack Moisture-Triggered Aliphatic Polyurethane Roofing Membrane《液体用单包装湿气引起的硬化脂肪族聚氨酯屋顶薄膜的标准规范》.pdf

ASTM D7312-2007 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)《采用超级铺面剪切试验器(SST.pdf

ASTM D7312-2010 1875 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)《采用超级铺面剪切试验.pdf

ASTM D7313-2007 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry《用盘状紧凑拉伸几何物测定地沥青集料混合物断裂强度的标准试验方法》.pdf

ASTM D7313-2007a 781 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry《用盘状紧凑拉伸几何物测定地沥青集料混合物断裂强度的标准试验.pdf

ASTM D7313-2013 2248 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry《采用盘状紧凑拉伸几何法测定地沥青集料混合物断裂强度的标准试.pdf

ASTM D7314-2008 317 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line At-line Sampling.pdf