1、BRITISH STANDARD MARINE SERIES CONFIRMED JULY 1999 BS MA 105-3:1987 ISO8304:1984 Series3 shipborne barges Part3: Specification for principal mating dimensions for the ventilating system ISO title: Shipbuilding Shipborne barges, series3 Ventilating system Principal mating dimensions UDC 629.122.3:629
2、.014.3BSMA105-3:1987 This BritishStandard, having been prepared under the directionof the Shipbuilding and Marine Standards Committee, was published under the authorityof the Board of BSI andcomes into effect on 31July1987 BSI 02-2000 The following BSI references relate to the work on this standard:
3、 Committee reference SME/14 Draft for comment83/79144DC ISBN 0 580 16014 9 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted by the Shipbuilding and Marine Standards Committee (SME/-) to Technical Committee SME/14, upon which the following bodies w
4、ere represented: Association of Master Lightermen and Barge Owners (Port of London) British Tugowners Association British Waterways Board HM Customs and Excise Shiprepairers and Shipbuilders Independent Association Amendments issued since publication Amd. No. Date of issue CommentsBSMA105-3:1987 BSI
5、 02-2000 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Dimensions 1 4 Tolerances 1 Figure 1 Arrangement of the ventilation opening of shipbornebarges, series3 1 Figure 2 Dimensions of the connecting flange 2 Publicat
6、ion referred to Inside back coverBSMA105-3:1987 ii BSI 02-2000 National foreword This Part of BS MA105 has been prepared under the direction of the Shipbuilding and Marine Standards Committee and is identical with ISO8304:1984 “Shipbuilding Shipborne barges, series3 Ventilation system Principal mati
7、ng dimensions”, published by the International Organization for Standardization (ISO). ISO8304 was produced as a result of international discussion in which the UKtook an active part. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as
8、 a BritishStandard without deviation. Some terminology and certain conventions are not identical with those used in BritishStandards; attention is drawn especially to the following. Where the words “International Standard” appear, referring to this standard, they should be read as “Part of BS MA105”
9、. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International Standard
10、 Corresponding BritishStandard ISO6765:1985 BS MA105 Series3 shipborne barges Part1:1987 Specification for main dimensions (Identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and 2, an inside back cover and a back cover. This standard has b
11、een updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BSMA105-3:1987 BSI 02-2000 1 1 Scope and field of application This International Standard specifies the principal mating dimensions of the ventilation sy
12、stem of shipborne barges, series3. 2 Reference ISO6765, Shipbuilding Shipborne barges, series3 Main dimensions. 3 Dimensions 3.1 The principal mating dimensions of the ventilation system of shipborne barges, series3, shall provide for the joining up of shipborne barges to the ventilation system of b
13、arge-carriers of different types by means of flexible hoses when cargoes requiring ventilation are transported. 3.2 The arrangement of the ventilation opening shall comply with the existing opening on shipborne barges, series3 (seeFigure 1). 3.3 The dimensions of the connecting flange of the ventila
14、tion system of shipborne barges, series3, shall comply with the dimensions shown on Figure 2. 4 Tolerances The tolerances on the arrangement of the opening are 0,5mm. Figure 1 Arrangement of the ventilation opening of shipborne barges, series3BSMA105-3:1987 2 BSI 02-2000 Figure 2 Dimensions of the c
15、onnecting flangeBSMA105-3:1987 BSI 02-2000 Publication referred to Seenational foreword.BSMA 105-3:1987 ISO8304:1984 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on sta
16、ndards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality
17、of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offe
18、rs members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:0208996700
19、1. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standar
20、ds through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date wit
21、h standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, o
22、f the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior w
23、ritten permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
