ANSI CAN CSA-C22.2 NO.61010-2-030-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-030 Particular requirements for testing a.pdf

上传人:proposalcash356 文档编号:434337 上传时间:2018-11-11 格式:PDF 页数:48 大小:737.10KB
下载 相关 举报
ANSI CAN CSA-C22.2 NO.61010-2-030-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-030 Particular requirements for testing a.pdf_第1页
第1页 / 共48页
ANSI CAN CSA-C22.2 NO.61010-2-030-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-030 Particular requirements for testing a.pdf_第2页
第2页 / 共48页
ANSI CAN CSA-C22.2 NO.61010-2-030-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-030 Particular requirements for testing a.pdf_第3页
第3页 / 共48页
ANSI CAN CSA-C22.2 NO.61010-2-030-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-030 Particular requirements for testing a.pdf_第4页
第4页 / 共48页
ANSI CAN CSA-C22.2 NO.61010-2-030-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-030 Particular requirements for testing a.pdf_第5页
第5页 / 共48页
点击查看更多>>
资源描述

1、Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Part icular requirements for testing and measuring circuitsCAN/CSA-C22.2 No. 61010-2-030-12(IEC 61010-2-030:2010, MOD)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Leg

2、al Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a s

3、tandard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or cond

4、itions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy,

5、 completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR

6、THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR

7、 ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing

8、and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate

9、 degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CS

10、A has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized

11、licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and application

12、s for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclo

13、sure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any

14、or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of t

15、his document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form

16、 may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document

17、 without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to d

18、estroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceCAN/CSA-C22.2 No. 61010-2-030-12May 2012Title:Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: P

19、articula r requirements for testing and measuring circuitsPagination:40 pagesTo register for e-mail notification about any updates to this publicationgo on-line to shop.csa.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for

20、updates to this publication is 2421899.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at csagroup.org/legal to find out how we protect your personal information.The Canadian Standards Association (CSA), under whose auspices this National

21、Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a

22、national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations,

23、particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objec

24、tives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Associat

25、ion offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office

26、 and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose

27、 mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5

28、060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the n

29、ational interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furtherin

30、g internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of t

31、he standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consume

32、rs), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto

33、 periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norm

34、e nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian

35、 Standards AssociationCanadian Standards AssociationCAN/CSA-C22.2 No. 61010-2-030-12First Edition(IEC 61010-2-030:2010, MOD)ISAANSI/ISA-61010-2-030 (82.02.03)First EditionUnderwriters Laboratories Inc.UL 61010-2-030First EditionSafety requirements for electrical equipment for measurement,control, an

36、d laboratory use Part 2-030: Particular requirements fortesting and measuring circuitsMay 11, 2012This standard is based on IEC 61010-2-030, First Edition (2010).ANSI/UL 61010-2-030-2012Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (CSA), the Instrume

37、ntation,Systems, and Automation Society (ISA) and Underwriters Laboratories Inc. (UL). Comments orproposals for revisions on any part of the standard may be submitted to CSA, ISA, or UL at any time.Revisions to this standard will be made only after processing according to the standards developmentpr

38、ocedures of CSA, ISA, and UL. CSA and UL will issue revisions to this standard by means of a newedition or revised or additional pages bearing their date of issue. ISA will incorporate the same revisionsinto a new edition of the standard bearing the same date of issue as the CSA and UL pages.CSA, IS

39、A, and UL are separate and independent entities and each is solely responsible for itsoperations and business activities. The CSA trade names and trademarks depicted in this documentare the sole property of the Canadian Standards Association (CSA). The ISA trade names andtrademarks depicted in this

40、document are the sole property of ISA The Instrumentation, Systems andAutomation Society. The UL trade names and trademarks depicted in this document are the soleproperty of Underwriters Laboratories Inc. (UL).ISBN 978-1-55491-706-8 2012 Canadian Standards AssociationAll rights reserved. No part of

41、this publication may be reproduced in any form whatsoever without theprior permission of the publisher.To purchase CSA Standards and related publications, visit CSAs Online Store at shop.csa.ca or calltoll-free 1-800-463-6727 or 416-747-4044.CSA Standards are subject to periodic review, and suggesti

42、ons for their improvement will be referredto the appropriate committee. To submit a proposal for change to CSA Standards, please send thefollowing information to inquirescsa.ca and include Proposal for change in the subject line:Standard designation (number); relevant clause, table, and/or figure nu

43、mber; wording of the proposedchange; and rationale for the change.ISBN 978-1-937560-33-1 Copyright 2012 ISAAll rights reserved. Not for resale. No part of this publication may be reproduced in any form, includingan electronic retrieval system, without the prior written permission of ISA.Copyright 20

44、12 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of U

45、L.This ANSI/UL Standard for Safety consists of the First Edition.The most recent designation of ANSI/UL 61010-2-030 as an American National Standard (ANSI)occurred on May 11, 2012. ANSI approval for a standard does not include the Cover Page, TransmittalPages, Title Page (front and back), or the Pre

46、face. The National Difference Page and IEC Forewordare also excluded from the ANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Stan

47、dardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.MAY 11, 2012CAN/CSA-C22.2 NO. 61010-2-030-12 ANSI/ISA-61010-2-030 (82.02.03) UL 61010-2-0304No Text on This PageCONTENTSPreface .7NATIONAL DIFFERENCES .9FOREWORD .101 Scope

48、 and object 132 Normative references .133 Terms and definitions 133.5 Safety terms 134 Tests .145 Marking and documentation .146 Protection against electric shock .166.6 Connections to external circuits .176.9 Constructional requirements for protection against electric shock 187 Protection against m

49、echanical HAZARDS 188 Resistance to mechanical stresses .189 Protection against the spread of fire 1910 Equipment temperature limits and resistance to heat 1911 Protection against HAZARDS from fluids .1912 Protection against radiation, including laser sources, and against sonic and ultrasonicpressure .1913 Protection against liberated gases and substances, explosion and implosion .1914 Components and subassemblies .1914.101 Circuits or components used as TRANSIENT OVERVOLTAGE limiting devices in measu

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1