1、L MIL-L-5L243B (1) 13 W 7999906 0333688 2 AMSC NIA FSC 1330 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. MIL-L-51293B( MU) AMENDMENT 1 22 August 1986 MILITARY SPECIFICATION LAUNCHER AND GRENADES, SMOKE: HC AND WP, 176; COMPONENTS FOR This amendment forms a part o
2、f MIL-L-S1293B(MU) , dated 10 June 1970, and is approved for use within the Chemical Research, Development and Engineering Center, Department of the Army and is available for use by all Departments and Agencies of the Department of Defense. PAGE 2 3.1: Add the following to the end of the paragraph:
3、“All plastic components shall be molded from the same batch of material which must be produced at the same time and place under the same manufacturing conditions (see 6.5).“ 3.6, line 2: Delete Y.,6oot1 and substitute “1,700“. PAGE 6 4.4.3.3(g)4. : Delete “Dimension 0.156 incorrect“ and substitute “
4、Dents in surface . PAGE 8 Add the following new paragraphs: 6.4 Manufacturing method for cap. The aluminum cap has been successfully formed by the magnetic pulse metalforming method.“ “6.5 Plastic components. The plastic components should be molded from the same batch of material in order to assure interchangeability and dimensional stability of items due to the state of the art in molding techniques.“ Custodian: Preparing activity: Aw - EA Project No. 1330-A302 1 of 1 I* Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
