1、MILITARY SPECIFICATION MIL-S-44091 AMENDMENT- 1 22 June i984 STRAP, CHIN, GROUND TROOPS, PARACHUTISTS HELMET This amendment forms a part of Military Specification MIL-S-44091, dated 30 November 1982, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE 1 2.1, un
2、der STANDARDS MILITARY: Delete “MIL-STD-1188 - Commercial Packaging of Suppl ies and Equipment“. PAGE 2 Add the following before 2.2: “2.1.1 Other publications. Unless otherwise specified, the following documents of the issue in effect on date of invitation for bids or request for proposal, form a p
3、art of this document to the extent specified herein. AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 3951 - Standard Practice for Commercial Packaging (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Techni
4、cal society and technical association documents are generally available for reference from libraries. technical groups and using Federal agencies.)“ They are also distributed among Add the following after 3.3: “3.3.1 Identification marking. A white paper label with legible and durab1.e black marking
5、, approximately 1/4 inch high, shall be placed inside the polyethylene bag specified in 5.1.1, so that the label can be read thru the bag, paper, white, and having a minimum basis weight of 20 pounds (17 x 22/500). The paper label shall contain the following information: The label paper shall be mad
6、e of commercial quality writing or printing Item Description Contract Number Stock Number Supplier s Name FSC 8470 Page 1 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-44091 Amendment-1 flIL-S-Y407I (I) 4 977770b 0447548 W D b PAGE 6 4.4
7、.3, under “End clips“: Add the following defect: “Improperly clinched resulting in the inability to pass clips freely through buckle - Major.“ PAGE 9 5.1.1: Add to end of paragraph. “This secured bundle along with the paper label specified in 3.3.1 (with the marking facing the outside of the bag) sh
8、all be inserted in a close fitting clear polyethylene film bag of 0.0015 inch thickness (+ 20 percent tolerance). The polyethylene bag shall be formed with heat sealed Seams that are straight, continuous and parallel to the formed edges. of the bag. fabricated from polyethylene film tubing or sheeti
9、ng. shall contain a 1/4 inch diameter hole to allow excess air to escape. closure of the bag shall be accomplished by heat sealing.“ The bag may be One corner of the bag Final 5.1.2, line 2: Delete “MIL-STD-1188“ and substitute “ASTM D 3951“. PAGE 10 5.2.3: Delete “MIL-STD-1188“ and substitute “ASTM
10、 D 3951“. 5.3: Delete and substitute: “5.3 Palletization. When specified (see 6.21, strap, packed as specified Each prepared load shall be bonded with primary and in 5.2, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. secondary straps in accordance with t
11、he bonding means K and L or film bonding means O or P. MIL-STD-147. of each course. of the patterns specified in MIL-STD-147, the pallet pattern used shall first be approved by the contracting officer.“ Pallet patterns shall be in accordance with the appendix of Interlocking of loads shall be effect
12、ed by reversing the pattern If the container is of a size which does not conform to any 5.4: Delete “MIL-STD-1188“ and substitute “ASTM D 3951“. PAGE 11 6.4, line 2: Delete “DAR 7-104.55“ and substitute “FAR 52.209.4“. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without li
13、cense from IHS-,-,-Custodians : Army - GL Navy - Nu Air Force - 99 MIL-S-44091 (1) 4 H 994990b 0447549 T MIL-S-44091 Amendment-1 Preparing activity: Army - GL Project No. 8470-0093 Review activities: Army - MD Navy - MC Air Force - 82 DLA - CT 3 xi U.S. GOVERNMENT PRINTING OFFICE 1989-705-040/A3395 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
