1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM ASD-STAN prEN 3645-013 Edition P 2 November 2017 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Supersedes editi
2、on P 1 of November 2005 and will supersede EN 3645-013:2007 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 013: Dummy receptacle Product standard Luft- und Raumfahrt Ele
3、ktrische Rundsteckverbinder, kontaktgeschtzt, drei-gngige Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 C oder 200 C Teil 013: Blinddose Produktnorm Srie arospatiale Connecteurs lectriques circulaires contacts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisati
4、on 175 C ou 200 C continu Partie 013 : Embase de repos Norme de produit This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace I
5、ndustry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identific
6、ation of the standard. After examination and review by users and formal agreement of ASD-STAN, the ASD-STAN prEN will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national m
7、embers have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. ASD-STAN Technical Committee approves that: “This document is published by ASD-STAN for the needs of the European Aerospace Ind
8、ustry. The use of this standard is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” ASD-STAN reviews each standard and technical report at least every five years at which ti
9、me it may be revised, reaffirmed, stabilized or cancelled. ASD-STAN invites you to send your written comments or any suggestions that may arise. All rights reserved. No parts of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic,
10、mechanical, photocopying, recording, or otherwise, without prior written permission of ASD-STAN. Order details: E-mail: salesasd-stan.org Web address: http:/www.asd-stan.org/ Edition approved for publication 1st November 2017 Comments should be sent within six months after the date of publication to
11、 ASD-STAN Electrical Domain Copyright 2017 ASD-STAN prEN 3645-013:2017 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics 4 5 Designation . 7 6 Marking . 8 7 Technical specification . 8 Foreword This standard was reviewed by the D
12、omain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 3645-013:2017 (E) 3 1 Scope This standard specifies the ch
13、aracteristics of dummy receptacles in the family of circular, electrical connectors, with triple start threaded coupling. It applies to models in Table 3. For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012 respectively. These receptacles are derived from those
14、 in specification MIL-DTL-38999/22. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refe
15、renced document (including any amendments) applies. EN 3645-001, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification EN 3645-002, Aerospace series Connectors, electrical, cir
16、cular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3645-006, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C
17、 or 200 C continuous Part 006: Protective cover for receptacle Product standard EN 3645-008, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 008: Non release plug with grounding ring Product standard
18、 EN 3645-011, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 011: Lanyard release plug with grounding fingers Type 1 Product standard EN 3645-012, Aerospace series Connectors, electrical, circular,
19、scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 012: Lanyard release plug with grounding fingers Type 2 Product standard MIL-DTL-38999/22, Connectors, electrical, circular, receptacle, threaded, dummy stowage, series III, metric1) 3 Terms and definit
20、ions For the purposes of this document, the terms and definitions given in EN 3645-001 apply. 1) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301 USA. prEN 3645-013:2017 (E) 4 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and to
21、lerances are in millimetres. Key 1 Red strip 2 Seal a Detail size 09 only Figure 1 prEN 3645-013:2017 (E) 5 Table 1 Shell size P PP R1 R2 S V W U Mass g 0,20 0,20 0,30 1,4 0 0,05 0 max. Models F, W, T, Z Model K 09 3,25 5,49 18,26 15,09 23,80 19,50 2,80 2,20 a 7 20 11 4,93 20,62 18,26 26,20 7,24 11
22、32 13 23,01 20,62 28,60 8,66 15 44 15 24,61 23,01 31,00 10,24 18 52 17 26,97 24,61 33,30 11,84 22 64 19 29,36 26,97 36,50 13,16 26 75 21 31,75 29,36 39,70 18,70 3,50 2,90 14,76 30 87 23 3,91 6,15 34,93 31,75 42,90 16,33 33 96 25 38,10 34,93 46,00 17,93 36 104 a U size 09 5,6106,00. 4.2 Materials and
23、 surface treatment See Table 3. 4.3 Recommended panel cut-out See Figure 2 and Table 2. Dimensions and tolerances are in millimetres. prEN 3645-013:2017 (E) 6 Rear panel mounting Front panel mounting Key 1 R1 or R2 Figure 2 Table 2 Shell size A min. C 0,13 D min. R1 R2 09 16,66 3,25 31,80 18,26 15,0
24、9 11 20,22 35,00 20,62 18,26 13 23,42 39,40 23,01 20,62 15 26,59 42,50 24,61 23,01 17 30,96 45,70 26,97 24,61 19 32,94 48,50 29,36 26,97 21 36,12 51,70 31,75 29,36 23 39,29 3,81 54,90 34,93 31,75 25 42,47 58,00 38,10 34,93 4.4 Electrical, mechanical and climatic characteristics See EN 3645-002. prEN
25、 3645-013:2017 (E) 7 5 Designation EXAMPLE Description block DUMMY RECEPTACLE Identity block EN3645-F5G Number of the basic standard Model according to Table 3 Shell code for dummy receptacle (see EN 3645-002) Shell size code according to Table 4 NOTE If necessary, the code I9005 shall be placed bet
26、ween the description block and the identity block. Table 3 Model coding Models Description W Dummy receptacles, with shell in cadmium-plated aluminium alloy, olive green Salt spray resistance 500 h Maximum operating temperature 175 C continuous F Dummy receptacles, with shell in nickel-plated alumin
27、ium alloy Maximum operating temperature 200 C continuous T Receptacles and plugs, nickel fluorocarbon polymer plated aluminium alloy, non reflective 500 h salt spray Plug with grounding spring Crimp, removable contacts Maximum operating temperature 175 C continuous Z Receptacles and plugs, zinc-nick
28、el plated aluminium alloy, non reflective black 500 h salt spray Plug with grounding spring Crimp, removable contacts Maximum operating temperature 175 C continuous K Dummy receptacle, with shell in stainless steel Maximum operating temperature 200 C continuous Table 4 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J prEN 3645-013:2017 (E) 8 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001.
