1、Designation: F985 00 (Reapproved 2012)F985 18 An American National StandardStandard Specification forPanama Canal Pilot Platform1This standard is issued under the fixed designation F985; the number immediately following the designation indicates the year of originaladoption or, in the case of revisi
2、on, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscriptepsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification provides design and construction details for Panama Canal pilot platforms.1.2 Platforms
3、 shall be placed aboard the vessel in accordance with the requirements of the Panama Canal Commission and Title35 of the Code of Federal Regulations.1.2 The values stated in metricSI units are to be regarded as the standard. standard. No other units of measurement are includedin this standard.1.3 Th
4、is international standard was developed in accordance with internationally recognized principles on standardizationestablished in the Decision on Principles for the Development of International Standards, Guides and Recommendations issuedby the World Trade Organization Technical Barriers to Trade (T
5、BT) Committee.2. Referenced Documents2.1 ASTM Standards:2B221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes2.2 Federal Standard:Code of Federal Regulations, Title 35 Panama Canal Regulations (Parts 1 through 299)33. Ordering Information3.1 Pilot platfor
6、ms shall be ordered by this ASTM designation and year of issue.3.2 Paint finish (if other than standard).4. Materials and Methods4.1 Platforms shall be welded-aluminum construction in accordance with Specification B221, Alloy 5086.4.2 Decking shall be serrated-aluminum grating.4.3 Canopy shall be of
7、 vinyl-nylon construction with sewn seams and metallic grommets.4.4 Canopy tie-downs shall be 18-in. (DN 4-mm) 4-mm nylon line.4.5 Paint finish, if required, shall be in accordance with customer specifications.5. Dimensions, Weight, and Permissible Variations5.1 Dimensions as indicated in Figs. 1-7.
8、5.2 The approximate unit weight is 1250 N.5.3 The construction tolerance is 4 mm, except bolt hole location 1 mm.6. Workmanship, Finish, and Appearance6.1 Shelters shall be free of weld splatter, sharp edges, and burrs injurious to personnel.1 This specification is under the jurisdiction of ASTM Com
9、mittee F25 on Ships and Marine Technology and is the direct responsibility of Subcommittee F25.03 onOutfitting and Deck Machinery.Current edition approved Oct. 1, 2012April 1, 2018. Published October 2012April 2018. Originally approved in 1986. Last previous edition approved in 20062012 asF985 00 (2
10、006).(2012). DOI: 10.1520/F0985-00R12.10.1520/F0985-18.2 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Document Summary page on the ASTM website.This d
11、ocument is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions
12、as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States17. Keywords7.1 Panama Canal; pilot platformFIG. 1 Pilo
13、t PlatformF985 182FIG. 2 Front ViewF985 183FIG. 3 Side ViewF985 184FIG. 4 Top ViewF985 185FIG. 5 Floor DetailsF985 186FIG. 6 Section Connecting PinsF985 187ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard
14、. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed
15、every five years andif not revised, either reapproved or withdrawn.Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible tec
16、hnical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshoho
17、cken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to phot
18、ocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ Available from U.S. Government Printing Office Superintendent of Documents, 732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401.FIG. 7 Ship AttachmentF985 188
