1、BRITISH STANDARD BS EN 61300-2-36: 1997 IEC 61300-2-36: 1995 Fibre optic interconnecting devices and passive components Basictest and measurement procedures Part 2.36: Tests Flammability (firehazard) The European Standard EN61300-2-36:1997 has the status of a BritishStandard ICS 33.180.20BSEN61300-2
2、-36:1997 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and comes intoeffect on 15November1997 BSI 09-1999 ISBN 0 580 28472 7 National foreword This British Standard is the English language
3、version of EN61300-2-36:1997. It is identical with IEC61300-2-36:1995. The UK participation in its preparation was entrusted by Technical Committee EPL/86, Fibre optics, to Subcommittee EPL/86/2, Interconnecting devices and passive components, which has the responsibility to: aid enquirers to unders
4、tand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on t
5、his subcommittee can be obtained on request to its secretary. From 1 January1997, all publications have the number60000 added to the old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications m
6、ay contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement thes
7、e international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary
8、provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title
9、 page, pages 2 to 4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN61300-2-36:1997 BSI 09-1999 i Con
10、tents Page National foreword Inside front cover Foreword 2 Text of EN 61300-2-36 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN61300-2-36 August1997 ICS 33.180.20 English version Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-36
11、: Tests Flammability (fire hazard) (IEC 61300-2-36:1995) Dispositifs dinterconnexion et composants passifs fibres optiques Mthodes fondamentales dessais et de mesures Partie 2-36: Essais Inflammabilit (risquesdincendie) (CEI 61300-2-36:1995) Lichtwellenleiter Verbindungselemente undpassive Bauteile
12、Grundlegende Prf- und Meverfahren Teil 2-36: Prfungen: Entflammbarkeit (Brandgefahr) (IEC 61300-2-36:1995) This European Standard was approved by CENELEC on 1997-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe
13、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (Engli
14、sh, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, B
15、elgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr
16、Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61300-2-36:1997 EEN61300-2-36:1997 BSI 09-1999 2 Foreword The text of the International Standard
17、 IEC61300-2-36:1995, prepared by SC86B, Fibre optic interconnecting devices and passive components, of IEC TC86, Fibre optics, was submitted to the formal vote and was approved by CENELEC as EN61300-2-36 on1997-07-01 without any modification. The following dates were fixed: Annexes designated “norma
18、tive” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC61300-2-36:1995 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword 2 1.1
19、Scope and object 3 1.2 General description 3 1.3 Normative reference 3 1 General 3 2 Apparatus 3 3 Procedure 3 4 Severity 3 5 Details to be specified 3 Annex ZA (normative) Normative references tointernational publications with their corresponding European publications 4 latest date by which the EN
20、has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1998-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1998-06-01EN61300-2-36:1997 BSI 09-1999 3 1 General 1.1 Scope and object The purp
21、ose of this part of IEC1300 is to verify the flammability of materials. 1.2 General description This procedure is conducted in accordance with IEC695-2-2. The specimen is exposed to a flame for a specified period of time and the ability of the material to support combustion is noted. 1.3 Normative r
22、eference The following normative document contains provisions which, through reference in this text, constitute provisions of this part of IEC1300. At the time of publication, the edition indicated was valid. All normative documents are subject to revision, and parties to agreements based on this pa
23、rt of IEC1300 are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 695-2-2:1991, Fire hazard testing Part2:Testmethods Section 2: Needle-f
24、lame test. . 2 Apparatus The apparatus shall be in accordance with IEC695-2-2. The apparatus consists of the following elements. 2.1 Flame generating equipment 2.2 An appropriate support for the specimen 3 Procedure Conduct the measurement in accordance with IEC695-2-2. 4 Severity The severity is de
25、termined by the duration of the application of the flame. 5 Details to be specified The following details, as applicable, shall be specified in the detail specification: Point of flame application Orientation of specimen Duration of flame application Pre-conditioning procedure Initial examination an
26、d measurement Any deterioration of mechanical/optical properties allowed Allowable post-burning time after removal of needle flame Deviations from test procedureEN61300-2-36:1997 4 BSI 09-1999 Annex ZA (normative) Normative references to international publications with their corresponding European p
27、ublications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
28、of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTEWhen an international publication has been modified by common modifications, indic
29、ated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60695-2-2 1991 Fire hazard testing Part 2: Test methods Section 2: Needle-flame test EN60695-2-2 19945 blankBS EN 61300-2-36: 1997 IEC 61300-2-36: 1995 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitu
30、tion BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should
31、make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee r
32、esponsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, intern
33、ational and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requeste
34、d. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services.
35、Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:0208996700
36、2. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval
37、 system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations.
38、If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
