1、BSI Standards PublicationBS EN ISO 12999-1:2014Acoustics Determination andapplication of measurementuncertainties in buildingacousticsPart 1: Sound insulation (ISO12999-1:2014)BS EN ISO 12999-1:2014Incorporating corrigendum August 2014BS EN ISO 12999-1:2014 BRITISH STANDARDNational forewordThis Brit
2、ish Standard is the UK implementation of EN ISO 12999-1:2014.It supersedes BS EN 20140-2:1993, which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee EH/1, Acoustics to Subcommittee, EH/1/6, Building acoustics.A list of organizations represented on this subcom
3、mittee can beobtained on request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 87540 3 ICS 17.140
4、.01; 91.120.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 June 2014.Amendments/corrigenda issued since publicationDate Text affected31 August 2014 Impleme
5、ntation of CEN correction Notice 16 July 2014: Supersession information updatedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12999-1 May 2014 ICS 17.140.01; 91.120.20 English Version Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sou
6、nd insulation (ISO 12999-1:2014) Acoustique - Dtermination et application des incertitudes de mesure dans lacoustique des btiments - Partie 1: Isolation acoustique (ISO 12999-1:2014) Akustik - Bestimmung und Anwendung der Messunsicherheiten in der Bauakustik - Teil 1: Schalldmmung (ISO 12999-1:2014)
7、 This European Standard was approved by CEN on 17 April 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe
8、rences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE
9、N member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedoni
10、a, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPIS
11、CHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12999-1:2014 ESupersedes EN 20140-2:19933 Foreword This document (EN ISO 12999-1:2014
12、) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either
13、 by publication of an identical text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/
14、or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 20140-2:1993. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,
15、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, S
16、witzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12999-1:2014 has been approved by CEN as EN ISO 12999-1:2014 without any modification. EN ISO 12999-1:2014 (E) BS EN ISO 12999-1:2014BS EN ISO 12999-1:2014ISO 12999-1:2014(E) ISO 2014 All rights reserved iiiContents PageFo
17、reword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Detailed uncertainty budget 35 Uncertainty determination by inter-laboratory measurements 35.1 General . 35.2 Measurement situations . 35.3 Measurement conditions 45.4 Number of participating laboratories . 45.5 S
18、tating the test results of inter-laboratory measurements 45.6 Choice of test specimen . 45.7 Laboratories with outlying measurement results 55.8 Verification of laboratory results by results of inter-laboratory tests 56 Uncertainties associated with single-number values 77 Standard uncertainties for
19、 typical measurands 77.1 General . 77.2 Airborne sound insulation 77.3 Impact sound insulation . 87.4 Reduction of transmitted impact noise by floor coverings . 98 Application of the uncertainties 10Annex A (informative) Example of handling uncertainties in building acoustics 12Annex B (informative)
20、 Example for the calculation of the uncertainty of single number values 15Annex C (informative) Detailed uncertainty budget .18Bibliography .20BS EN ISO 12999-1:2014ISO 12999-1:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bod
21、ies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organization
22、s, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further
23、maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
24、Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introdu
25、ction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conf
26、ormity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This fir
27、st edition of ISO 12999-1 cancels and replaces ISO 140-2:1991, which has been technically revised. It also incorporates the Technical Corrigendum ISO 140-2:1991/Cor 1:1993.ISO 12999 consists of the following parts, under the general title Acoustics Determination and application of measurement uncert
28、ainties in building acoustics: Part 1: Sound insulationA part 2 dealing with sound absorption is under preparation.iv ISO 2014 All rights reservedBS EN ISO 12999-1:2014ISO 12999-1:2014(E)IntroductionAn assessment of uncertainties that is comprehensible and close to reality is indispensable for many
29、questions in building acoustics. Whether a requirement is met, a laboratory delivers correct results or the acoustic properties of a product are better than the same properties of some other product can be decided only by adequately assessing the uncertainties associated with the quantities under co
30、nsideration.Uncertainties should preferably be determined following the principles of ISO/IEC Guide 98-3. This Guide specifies a detailed procedure for the uncertainty evaluation that is based upon a complete mathematical model of the measurement procedure. At the current knowledge, it seems to be i
31、mpossible to formulate these models for the different quantities in building acoustics. Therefore, only the principles of such an uncertainty assessment are explained.To come to uncertainties all the same, the concept of reproducibility and repeatability is incorporated which is the traditional way
32、of uncertainty determination in building acoustics. This concept offers the possibility to state the uncertainty of a method and of measurements carried out according to the method, based on the results of inter-laboratory measurements. ISO 2014 All rights reserved vBS EN ISO 12999-1:2014BS EN ISO 1
33、2999-1:2014Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation1 ScopeThis part of ISO 12999 specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for a detailed uncertainty
34、 assessment; a determination of uncertainties by inter-laboratory tests; an application of uncertainties.Furthermore, typical uncertainties are given for quantities determined according to ISO 10140, ISO 140-4, ISO 140-5, ISO 140-7 and ISO 717 (all parts).2 Normative referencesThe following document
35、s, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 140-4, Acoustics Measureme
36、nt of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between roomsISO 140-5, Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and f
37、aadesISO 140-7, Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floorsISO 717 (all parts), Acoustics Rating of sound insulation in buildings and of building elementsISO 5725-1:1994, Accuracy (trueness and precis
38、ion) of measurement methods and results Part 1: General principles and definitionsISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement methodISO 10140 (all parts
39、), Acoustics Laboratory measurement of sound insulation of building elements3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.NOTE Whenever applicable, they are equivalent to those given in ISO 5725-1, in the ISO/IEC Guide 98-31and in ISO/IEC Guide 9
40、9.2INTERNATIONAL STANDARD ISO 12999-1:2014(E) ISO 2014 All rights reserved 1BS EN ISO 12999-1:2014ISO 12999-1:2014(E)3.1measurandparticular quantity subject to measurement, e.g. the airborne sound insulation of a particular window pane determined in accordance with ISO 101403.2measurement resultvalu
41、e attributed to a measurand, obtained by following the complete set of instructions given in a measurement procedureNote 1 to entry: The measurement result may be a frequency band level or a single number value determined according to the rating procedures of ISO 717 (all parts).3.3uncertaintyparame
42、ter, associated with the result of a measurement, that characterizes the dispersion of the values that can reasonably be attributed to the measurand3.4standard uncertaintyuuncertainty of the result of a measurement expressed as a standard deviation3.5combined standard uncertaintyucstandard uncertain
43、ty of the result of a measurement when that result is obtained from the values of a number of other quantities, equal to the positive square root of a sum of terms, the terms being the variances or covariances of these other quantities weighted according to how the measurement result varies with cha
44、nges in these quantities3.6expanded uncertaintyUquantity defining an interval about the result of a measurement that may be expected to encompass a large fraction of the distribution of values that can reasonably be attributed to the measurand3.7coverage factorknumerical factor used as a multiplier
45、of the combined standard uncertainty in order to obtain an expanded uncertainty3.8repeatability conditioncondition of measurement that includes the same measurement procedure, same operators, same measuring system, same location (laboratory or usual building), and replicate measurements on the same
46、object over a short period of time3.9repeatability standard deviationrstandard deviation of measurement results obtained under repeatability conditions3.10reproducibility conditioncondition of measurement that includes different locations (laboratories or usual buildings), operators, measuring syste
47、ms, and replicate measurements on the same or similar objects2 ISO 2014 All rights reservedBS EN ISO 12999-1:2014ISO 12999-1:2014(E)3.11reproducibility standard deviationRstandard deviation of measurement results obtained under reproducibility conditions3.12in-situ conditioncondition of measurement
48、that includes the same location (laboratory or usual building), and replicate measurements on the same object by different operators using different measuring systems3.13in-situ standard deviationsitustandard deviation of measurement results obtained under in-situ conditions4 Detailed uncertainty bu
49、dgetThe derivation of a detailed uncertainty budget is desirable to find out which uncertainty contributions are the most important ones and how these contributions can be reduced. Furthermore, such a budget reflects the individual sound fields during the measurement. Consequently, the uncertainty is valid for an individual measurement result and not for a whole family of results. Annex C gives provisions on the derivation of such uncertainty budgets.5 Uncertainty determination by inter-laboratory measurements5.1 GeneralS
