1、BS EN ISO 9202:2016Jewellery Fineness ofprecious metal alloys(ISO 9202:2014)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 9202:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 9202:2016.It is identical to ISO
2、9202:2014. It supersedes BS EN 29202:1993 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee STI/53, Specifications and test methods for jewellery andhorology.A list of organizations represented on this committee can beobtained on request to its secretary.
3、This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 74808 0ICS 39.060Compliance with a British Standard cannot confer imm
4、unity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9202 October 2016 IC
5、S 39.060 Supersedes EN 29202:1992English Version Jewellery - Fineness of precious metal alloys (ISO 9202:2014) Joaillerie, bijouterie - Titre des alliages de mtaux prcieux (ISO 9202:2014) Schmuck - Feingehalt von Edelmetalllegierungen (ISO 9202:2014) This European Standard was approved by CEN on 26
6、August 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
7、obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to th
8、e CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ire
9、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Ce
10、ntre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9202:2016 EBS EN ISO 9202:2016EN ISO 9202:2016 (E) 3 European foreword The text of ISO 9202:2014 has been prepared by Technical Commit
11、tee ISO/TC 174 “Jewellery” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 9202:2016. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and
12、conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This do
13、cument supersedes EN 29202:1992. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R
14、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9202:2014 has been
15、approved by CEN as EN ISO 9202:2016 without any modification. BS EN ISO 9202:2016ISO 9202:2014(E)Contents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Analytical methods for determining fineness 15 Range of fineness . 2 ISO 2014 All rights reserved iii
16、BS EN ISO 9202:2016ISO 9202:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body int
17、erested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnic
18、al Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO docu
19、ments should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsi
20、ble for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given fo
21、r the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL
22、: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 174, Jewellery.This second edition cancels and replaces the first edition (ISO 9202:1991), which has been technically revised.The major technical changes are the following:a) inclusion of a recommended method
23、 in Table 1;b) deletion of carat in Table 1;c) addition of finesses in Table 1;d) International Standard was editorially revised.iv ISO 2014 All rights reservedBS EN ISO 9202:2016ISO 9202:2014(E)IntroductionThe following definitions apply in understanding how to implement an ISO International Standa
24、rd and other normative ISO deliverables (TS, PAS, IWA). “shall” indicates a requirement; “should” indicates a recommendation; “may” is used to indicate that something is permitted; “can” is used to indicate that something is possible, for example, that an organization or individual is able to do som
25、ething.ISO/IEC Directives, Part 2 (sixth edition, 2011), 3.3.1 defines a requirement as an “expression in the content of a document conveying criteria to be fulfilled if compliance with the document is to be claimed and from which no deviation is permitted.”ISO/IEC Directives, Part 2 (sixth edition,
26、 2011), 3.3.2 defines a recommendation as an “expression in the content of a document conveying that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that a certain course of action is preferred but not necessarily required, or that
27、(in the negative form) a certain possibility or course of action is deprecated but not prohibited.” ISO 2014 All rights reserved vBS EN ISO 9202:2016BS EN ISO 9202:2016Jewellery Fineness of precious metal alloys1 ScopeThis International Standard specifies a range of fineness of precious metal alloys
28、 (excluding solders) recommended for use in the field of jewellery.National legal requirements for the designation, marking, and stamping of finished articles in the respective countries have to be taken into account.2 Normative referencesThe following documents, in whole or in part, are normatively
29、 referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 11210, Jewellery Determination of platinum in platinum jewellery
30、alloys Gravimetric method after precipitation of diammonium hexachloroplatinateISO 11426, Jewellery Determination of gold in gold jewellery alloys Cupellation method (fire assay)ISO 11427, Jewellery Determination of silver in silver jewellery alloys Volumetric (potentiometric) method using potassium
31、 bromideISO 11490, Jewellery Determination of palladium in palladium jewellery alloys Gravimetric determination with dimethylglyoximeISO 11494, Jewellery Determination of platinum in platinum jewellery alloys ICP OES method using yttrium as internal standard elementISO 11495, Jewellery Determination
32、 of palladium in palladium jewellery alloys ICP OES method using yttrium as internal standard elementISO 13756, Determination of silver in silver jewellery alloys Volumetric (potentiometric) method using sodium chloride or potassium chlorideISO 15093, Jewellery Determination of precious metals in 99
33、9 gold, platinum and palladium jewellery alloys Difference method using ICP-OESISO 15096, Jewellery Determination of silver in 999 silver jewellery alloys Difference method using ICP-OES3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1finenessmin
34、imum content of the named precious metal, measured in terms of parts per thousand () by weight of alloy4 Analytical methods for determining finenessFor determining the fineness of precious metal alloys, one of the following test methods shall be used: ISO 11210, ISO 11426, ISO 11427, ISO 11490, ISO
35、11494, ISO 11495, ISO 13756, ISO 15093, or ISO 15096.INTERNATIONAL STANDARD ISO 9202:2014(E) ISO 2014 All rights reserved 1BS EN ISO 9202:2016ISO 9202:2014(E)The recommended methods are listed in Table 1.5 Range of finenessTable 1 Fineness of precious metal alloysPrecious metalFinenessamin.Recommend
36、ed methodGold333b375417585750916990ISO 11426999 ISO 11426 or ISO 15093Platinum500600850900950990ISO 11210ISO 11494999 ISO 15093Palladium500950990ISO 11490ISO 11495999 ISO 15093Silver800925958990ISO 11427ISO 13756999 ISO 15096aThe fineness is stated as minimum value. No minus tolerance is allowed.bVa
37、lues are given in parts per thousand ().2 ISO 2014 All rights reservedBS EN ISO 9202:2016This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is in
38、corporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into
39、 standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe ca
40、n provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and ad
41、opted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the
42、 content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication an
43、d use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.St
44、oring and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only a
45、nd that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in an
46、y format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to rep
47、roduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access t
48、o over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single co
49、py and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards pub
