1、 Reference numberISO/IEC 11582:2002(E)ISO/IEC 2002Information technology Telecommunications and information exchange between systems Private Integrated Services Network Generic functional protocol for the support of supplementary services Inter-exchange signalling procedures and protocol Technologie
2、s de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Protocole gnrique fonctionnel pour le support de complments de service Procdures et protocole de signalisation entre commutateurs National Standard of CanadaCAN/CSA-ISO/IEC 11582:04(ISO/IEC 1158
3、2:2002)International Standard ISO/IEC 11582:2002 (second edition, 2002-07-01), has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 11582:04, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55397-250-3 January 2004The Canadian S
4、tandards Association, which The Standards Council of Canada is theoperates under the name CSA International coordinating body of the National Standards system, (CSA), under whose auspices this National Standard has a federation of independent, autonomousbeen produced, was chartered in 1919 and accre
5、dited organizations working towards the furtherby the Standards Council of Canada to the National development and improvement of voluntaryStandards system in 1973. It is a not-for-profit, standardization in the national interest.nonstatutory, voluntary membership association The principal objects of
6、 the Council are to foster engaged in standards development and certification and promote voluntary standardization as a means activities. of advancing the national economy, benefiting theCSA standards reflect a national consensus of producers health, safety, and welfare of the public, assisting and
7、 users including manufacturers, consumers, and protecting the consumer, facilitating domestic retailers, unions and professional organizations, and and international trade, and furthering internationalgovernmental agencies. The standards are used widely cooperation in the field of standards.by indus
8、try and commerce and often adopted by A National Standard of Canada is a standard whichmunicipal, provincial, and federal governments in their has been approved by the Standards Council ofregulations, particularly in the fields of health, safety, Canada and one which reflects a reasonablebuilding an
9、d construction, and the environment. agreement among the views of a number of capableIndividuals, companies, and associations across Canada individuals whose collective interests provide to theindicate their support for CSAs standards development greatest practicable extent a balance ofby volunteeri
10、ng their time and skills to CSA Committee representation of producers, users, consumers, andwork and supporting the Associations objectives others with relevant interests, as may be appropriatethrough sustaining memberships. The more than 7000 to the subject in hand. It normally is a standardcommitt
11、ee volunteers and the 2000 sustaining which is capable of making a significant and timelymemberships together form CSAs total membership contribution to the national interest.from which its Directors are chosen. Sustaining Approval of a standard as a National Standard ofmemberships represent a major
12、 source of income for Canada indicates that a standard conforms to theCSAs standards development activities. criteria and procedures established by the StandardsThe Association offers certification and testing services Council of Canada. Approval does not refer to thein support of and as an extensio
13、n to its standards technical content of the standard; this remains thedevelopment activities. To ensure the integrity of its continuing responsibility of the accreditedcertification process, the Association regularly and standards-development organization.continually audits and inspects products tha
14、t bear the Those who have a need to apply standards areCSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex in whenever practicable. These standards are subject Toronto, CSA has regional branch offices in major to periodic review; therefore, u
15、sers are cautioned centres across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the Association preparing the standard.has developed the necessary expertise to meet its The responsibility for approving National Standards
16、corporate mission: CSA is an independent service of Canada rests with theorganization whose mission is to provide an open and Standards Council of Canadaeffective forum for activities facilitating the exchange of 270 Albert Street, Suite 200goods and services through the use of standards, Ottawa, On
17、tario, K1P 6N7certification and related services to meet national and Canadainternational needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaAlthough the intended primary application of this Standard is
18、stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology Telecommunications and information exchange between systems Private Integrat
19、ed Services Network Genericfunctional protocol for the support of supplementary services CAN/CSA-ISO/IEC 11582:04 Inter-exchange signalling procedures and protocolJanuary 2004 CSA/1CAN/CSA-ISO/IEC 11582:04Information technology Telecommunications andinformation exchange betweensystems Private Integr
20、atedServices Network Genericfunctional protocol for the supportof supplementary services Inter-exchange signalling proceduresand protocolCSA PrefaceStandards development within the Information Technology sector is harmonized with internationalstandards development. Through the CSA Technical Committe
21、e on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO memberbody for Canada and sponsor of the Canadian National Committee of the I
22、EC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTelephone Consultative Committee (ITU-T).This Standard supersedes CAN/CSA-ISO/IEC 11582-97 (adoption of ISO/IEC 11582:1995).This International Standard was reviewed by the C
23、SA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is available on request from the CSA Project Manager.) From time to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will re
24、view these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative. This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Sta
25、ndard of Canada by the StandardsCouncil of CanadaJanuary 2004 Canadian Standards Association 2004All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO/IEC material is reprinted with permission. Where the words “thi
26、s International Standard” appear in thetext, they should be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Association 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727
27、416-747-4044www.csa.caReference numberISO/IEC 11582:2002(E)ISO/IEC 2002INTERNATIONAL STANDARD ISO/IEC11582Second edition2002-07-01Information technology Telecommunications and information exchange between systems Private Integrated Services Network Generic functional protocol for the support of supp
28、lementary services Inter-exchange signalling procedures and protocol Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Protocole gnrique fonctionnel pour le support de complments de service Procdures et protocole de signalisation ent
29、re commutateurs ISO/IEC 11582:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing t
30、he editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file
31、can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretar
32、iat at the address given below. ISO/IEC 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the ad
33、dress below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.ch Web www.iso.ch ii ISO/IEC 2002 All rights reservedISO/IEC 11582:2002(E) ISO/IEC 2002 All rights reserved iiiCont
34、ents Page Foreword vi Introduction vii 1 Scope 1 2 Conformance 1 3 Normative references 1 4 Definitions 2 4.1 External definitions 2 4.2 ACSE APDU 2 4.3 Additional Network Feature (ANF) 2 4.4 Adjacent PINX 2 4.5 Application Protocol Data Unit (APDU) 2 4.6 Call, Basic call 2 4.7 Call independent sign
35、alling connection4.8 Call independent 3 4.9 Call related 3 4.10 Connection oriented 3 4.11 Connectionless 3 4.12 Coordination Function 3 4.13 Destination PINX 3 4.14 DSE APDU 3 4.15 Dialogue Service Element (DSE) 3 4.16 End PINX 3 4.17 Gateway PINX 3 4.18 Generic Functional Transport Control (GFT-Co
36、ntrol) entity 3 4.19 Incoming side 3 4.20 Interpretation APDU 3 4.21 Inter-PINX link 3 4.22 Invocation 3 4.23 Link significance 4 4.24 Mistyped 4 4.25 Network significance 4 4.26 Next PINX 4 4.27 Notification 4 4.28 Originating PINX 4 4.29 Outgoing side 4 4.30 PINX address 4 4.31 Preceding PINX 4 4.
37、32 Private Signalling System No.1 4 4.33 Protocol Control 4 4.34 ROSE APDU 4 4.35 Side 4 4.36 Signalling Carriage Mechanism (SCM) 4 4.37 Source PINX 4 4.38 Subsequent PINX 5 4.39 Supplementary service 5 4.40 Supplementary Services Control (SS-Control) entity 5 4.41 Terminating PINX 5 4.42 Terminal,
38、Terminal Equipment 5 4.43 Transit PINX 5 4.44 Unrecognised 5 ISO/IEC 11582:2002(E) iv ISO/IEC 2002 All rights reserved5 List of acronyms 5 6 General principles 6 6.1 Application Association 6 6.2 Protocol Model 6 6.3 Application of the protocol model to communication between SS-Control entities in n
39、on-Adjacent PINXs 8 6.4 Services provided by ROSE 9 6.5 Services provided by ACSE 9 6.6 Services provided by DSE 9 6.7 Services provided by GFT-Control 10 6.7.1 Connection oriented services 10 6.7.2 Connectionless transport services 11 6.7.3 Notification services 11 6.8 Services provided by Protocol
40、 Control to GFT-Control 11 6.8.1 Connection oriented transport services 11 6.8.2 Connectionless transport service 12 6.8.3 Notification services 12 6.9 Services required of the Signalling Carriage Mechanism 12 7 Protocol Control and GFT-Control Requirements7.1 Call related Procedures for the transpo
41、rt of APDUs7.1.1 Protocol Control requirements 12 7.1.2 GFT-Control requirements 13 7.2 Connectionless APDU Transport Mechanism 20 7.2.1 Protocol Control requirements 20 7.2.2 Control requirements 20 7.3 Connection oriented call independent APDU transport mechanism 21 7.3.1 Protocol Control requirem
42、ents 21 7.3.2 Dynamic Description (SDL) of Connection oriented Protocol Control procedures 25 7.3.3 Generic Functional Transport Control requirements 31 7.4 Call related procedures for the transport of Notifications 34 7.4.1 Categories of notifications 34 7.4.2 Protocol Control requirements 34 7.4.3
43、 GFT-Control requirements 34 8 Application layer requirements 35 8.1 Coordination Function requirements 35 8.1.1 Inclusion of an Interpretation APDU at a Source PINX 35 8.1.2 Handling of APDUs at a Destination PINX8.2 ROSE requirements 35 8.3 ACSE requirements 36 8.4 DSE requirements 36 8.4.1 Action
44、s at the PINX which initiates the dialogue (PINX A) 36 8.4.2 Actions at the PINX which terminates the dialogue (PINX B) 37 8.4.3 Dialogue Continuation in the Active State 37 8.4.4 Dialogue Protocol Timers 37 8.4.5 Error procedures relating to dialogue control 38 8.4.6 Example of a dialogue 38 8.4.7
45、Dynamic Description (SDL) of Dialogue Identification Protocol Procedures 38 8.5 SS-Control requirements 43 ISO/IEC 11582:2002(E) ISO/IEC 2002 All rights reserved v9 Manufacturer Specific Information 43 9.1 Manufacturer specific operations 43 9.2 Manufacturer specific additions to standardised operat
46、ions 43 9.3 Manufacturer specific notifications 44 10 Message functional definitions and contents 45 10.1 ALERTING 45 10.2 CALL PROCEEDING 45 10.3 CONNECT 46 10.4 SETUP 46 10.5 DISCONNECT 46 10.6 RELEASE 46 10.7 RELEASE COMPLETE 47 10.8 FACILITY 47 10.9 NOTIFY 48 10.10 PROGRESS 48 11 General message
47、 format and information element coding 48 11.1 Message Type 48 11.2 Call reference 49 11.3 Other information elements 49 11.3.1 Bearer capability 49 11.3.2 Channel identification 50 11.3.3 Facility 50 11.3.4 Notification indicator 58 11.4 Encoding of information described using ASN.1 60 Annexes A -
48、Protocol Implementation Conformance Statement (PICS) for ISO/IEC 11582 61 B - ASN.1 definitions of generic parameters 70 C - Application of the functional protocol 75 D - Remote operations protocol and application association control 82 E - Formal ROSE Definitions 83 F - Examples of the use of Manuf
49、acturer specific information 84 G - Problem code definitions 91 H - Bibliography 92 I - Object identifiers defined in ISO/IEC 11582 93 J - “Recipe” for migration of X.208 / X.209 based QSIG ASN.1 modules to X.680 / X.690 ASN.1 95 K - ASN.1 definitions according to ITU-T Recs. X.208 / X.209 100 L - Technical changes since third edition of ECMA-165 112 ISO/IEC 11582:2002(E) vi ISO/IEC 2002 All rights reservedForeword ISO (the International Organization for Standardization)
