CSN ON 27 3542-1963 《电缆可移动车厢 带有两个钩子连接 （半挂车 ）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS M 43-1973 Methods of zoning aircraft and referencing access doors and panels《航空用分区和基准检修门和面板定位方法》.pdf

BS M 44-1974 Specification for identification of aircraft servicing maintenance ground handling and safety hazard points《航空服务、维修、地勤、安全 危险点的识别规范》.pdf

BS M 48-1975 Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series《航空般天用弹性环形密封圈尺寸规范(英制系列)》.pdf

BS M 56-1985 Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications《航空航天用聚四氟乙烯管密度和相对密度的测定方法》.pdf

BS M 57-1985 Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications《航空航天用聚四氟乙烯高温盘旋状软管组件规范》.pdf

BS M 58-1986 Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process《采用硫酸处理工艺的钛和钛合金阳极涂层规范》.pdf

BS M 61-1989 Specification for envelope dimensions of P clamps (loop clamps) for fluid systems《液压系统用“P”形卡箍(环形卡箍()轮廓尺寸规范》.pdf

BS M 62-1987 Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment Metric series《轴线调准的液压系统管道的夹紧装置的设计和评定试验规范.pdf

BS M 66-1987 Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems《液压系统 Q 形夹(中心安装)尺寸规范》.pdf