CNS 2739-1989 Method of Long Hill Climbing Test for Automobiles《汽车长坡路试验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 8829-1-2009 Aerospace - Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies - Metallic (stainless steel) braid《航空航天 聚四氟乙烯(PTFE)内软管组件 金属(不锈钢)编织》.pdf

BS ISO 883-2013 Indexable hardmetal (carbide) inserts with rounded corners without fixing hole Dimensions《不带固定孔的带圆角可转位硬性金属(碳化物)镶嵌件 尺寸规格》.pdf

BS ISO 885-2000 General purpose bolts and screws Metric series Radii under the head《一般用途螺栓和螺钉 米制系列 头下圆角半径》.pdf

BS ISO 888-2012 Fasteners Bolts screws and studs Nominal lengths and thread lengths《紧固件 螺栓、螺钉和螺柱 公称长度及螺纹长度》.pdf

BS ISO 8913-2007 Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies classification 400F 3000 psi (204C 20684 kPa) and 204C 21000 kPa (400F 3046 psi) Procurement s.pdf

BS ISO 9022-22-2012 Optics and photonics Environmental test methods Combined cold dry heat or temperature change with bump or random vibration《光学和光子学 环境试验方法 低温 干热或带碰撞或随机振动温度变化的组合》.pdf

BS ISO 91-2017 Petroleum and related products Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions Part Tables based.pdf

BS ISO 9154-2016 Aerospace Bolts with MJ threads made of heat-resistant nickel-based alloy strength class 1 550 MPa Procurement specification《航空航天 由强度等级为1550 MPa的耐热镍基合金制成的带MJ螺纹的螺栓 .pdf

BS ISO 9181-2007 Tools for pressing - Round punches with 60 conical head and reduced shank《冲压工具 60锥头缩径的圆冲头》.pdf