1、January 2011 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 91.220!$l“1739627www.din.deDDIN EN 12629-2Machines for the manufacture of constructional products from concreteand calcium-silicate Safety Part 2: Block making machines (includes Amendment A1:2010)English translation of DIN EN 12629-2:2011-01Maschinen fr die Herstellung von Bauprodukten aus Beton
3、und Kalksandsteinmassen Sicherheit Teil 2: Steinformmaschinen (enthlt nderung A1:2010)Englische bersetzung von DIN EN 12629-2:2011-01Machines pour la fabrication de produits de construction en bton et silico-calcaire Scurit Partie 2: Machines blocs (Amendement A1:2010 inclus)Traduction anglaise de D
4、IN EN 12629-2:2011-01SupersedesDIN EN 12629-2:2003-06See start of applicationwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.1801.11 DIN EN 12629-2:2011-01 A comma is used as the decimal marker. Start of application The start of ap
5、plication of this standard is 1 January 2011. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German body involv
6、ed in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-10 AA Betonsteinmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of concrete block making machines, and of the employers lia
7、bility insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the new “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned withi
8、n the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance wi
9、th the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN E
10、N 12629-2:2003-06 as follows: a) the foreword has been modified; b) the introduction has been modified and updated; c) Clause 1 “Scope” has been modified and updated; d) Clause 2 “Normative references” has been updated; e) Clause 3 “Terms and definitions” has been modified and updated; f) Clause 4 “
11、List of significant hazards” has been modified and updated; g) Clause 5 “Safety requirements and/or protective measures” has been modified and requirements related to the electrical equipment have been updated; h) Clause 6 “Verification of safety requirements and/or protective measures” has been upd
12、ated; 2 DIN EN 12629-2:2011-01 i) Clause 7 “Information for use” has been modified and updated; j) Clause 8 “Marking” has been updated; k) Annex A “Mechanical hazard zones for a common block making machine and requirements and measures” has been updated; l) Annex ZA (informative) “Relationship betwe
13、en this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been updated. Previous editions DIN EN 12629-2: 2003-06 3 DIN EN 12629-2:2011-01 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12629-2:2002+A1 September 2010 ICS 91.220
14、Supersedes EN 12629-2:2002English Version Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines Machines pour la fabrication de produits de construction en bton et silico-calcaire - Scurit - Partie 2: Machines blocs Maschi
15、nen fr die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 2: Steinformmaschinen This European Standard was approved by CEN on 1 November 2002 and includes Amendment 1 approved by CEN on 5 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal R
16、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. T
17、his European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members ar
18、e the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede
19、n, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. R
20、ef. No. EN 12629-2:2002+A1:2010: EEN 12629-2:2002+A1:2010 (E) 2 Contents age Foreword 3Introduction . 41 Scope 42 Normative references 53 Terms and definitions . 54 List of significant hazards 64.1 Mechanical hazards (see informative annex B) 64.2 Electrical hazards 84.3 Hazards generated by vibrati
21、on . 85 !Safety requirements and/or protective measures“ . 86 !Verification of safety requirements and/or protective measures“ 97 Information for use 98 Marking . 10Annex A (informative) Mechanical hazards zones for a common block making machine and requirements and measures . 11Annex B (informative
22、) Terminology of a common block making machine . 12Annex ZA (informative) ! Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 13Bibliography 14DIN EN 12629-2:2011-01 PEN 12629-2:2002+A1:2010 (E) 3 Foreword This document (EN 12629-2:2002+A1:2010)
23、 has been prepared by Technical Committee CEN /TC 151 “Construction equipment and building material machines - Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at t
24、he latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or al
25、l such patent rights. This document includes Amendment 1, approved by CEN on 2010-08-05. This document supersedes EN 12629-2:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This European Standard has been prepared under a mandate given to
26、CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.“ !The series “Machines for the manufacture of constructional pr
27、oducts from concrete and calcium silicate Safety“ consists of the following parts: Part 1: Common requirements Part 2: Block making machines Part 3: Slide and turntable machines Part 4: Concrete roof tile making machines Part 5.1: Pipe making machines manufacturing in the vertical axis Part 5.2: Pip
28、e making machines manufacturing in the horizontal axis Part 5.3: Pipe prestressing machines Part 5.4: Concrete pipe coating machines Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products Part 7: Stationary and mobile equipment for long line manufacture of prestre
29、ssed products Part 8: Machines and equipment for the manufacture of constructional products from calcium silicate (and concrete)“ !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Sta
30、ndard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Ki
31、ngdom. DIN EN 12629-2:2011-01 EN 12629-2:2002+A1:2010 (E) 4 Introduction !This European Standard is a Type C-standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situation and events are covered are indicated in the scope of this document. When provi
32、sions of this type C document are different from those, which are stated in type A or B documents, the provisions of this type C document take precedence over the provisions of the other documents, for machines that have been designed and built according to the provisions of this type C document. Th
33、is document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific for the block making machines as described in 1.1. With the aim of clarifying the intentions of the document it should be noticed that the following assumptions were made when producing i
34、t: specific conditions of use or environmental conditions out of the scope of the document shall be the subject of negotiations between the manufacturer and the user/owner, the equipment will only be used by competent and designated persons, the place of use/installation is adequately lit, all opera
35、tions are carried out by specially trained operators.“ 1 Scope 1.1 !This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of blocks, kerbs, paving stones and similar concrete products. EN 12629-1:2000+A1:2010 specifies general requirements applic
36、able to machines for the manufacture of constructional products from concrete and calciumsilicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.“ 1.2 !This European Standard deals with all significant haz
37、ards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.“
38、 1.3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1-2 of annex B) and the point where the pallet boards are brought to the assembly (see point 3 of annex B) until the point where the green products are removed from the machine assem
39、bly to the curing system (see point 4 of annex B). !deleted text“ DIN EN 12629-2:2011-01 EN 12629-2:2002+A1:2010 (E) 5 !1.4“ This European Standard deals with the hazards !deleted text“ listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of the block ma
40、king machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. NOTE 1 Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and a noise test code including noise declaration. NOTE 2 I
41、nterfaces between the block making machines and others of the installation are dealt with in !EN 12629-1:2000+A1:2010 (7.2)“. This standard establishes safety requirements and/or methods of protection which apply to these machines. ! 1.5 This document is not applicable to block making machines, whic
42、h are manufactured before the date of publication of this document by CEN.“ 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refer
43、enced document (including any amendments) applies.“ !deleted text“ !EN 12629-1:2000+A1:2010“, Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 1: Common requirements !EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for
44、 design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003)“ 3 Terms and definitions !For the purposes of this document, the terms and definitions given in EN
45、ISO 12100-1:2003, EN 12629-1:2000+A1:2010 and the following apply.“ NOTE See also annex B for terminology of a typical block making machine. 3.1 drawing box container having the shape of a box with an open or movable bottom. The drawing box fills the mould with the mixture 3.2 drawing box grid machi
46、ne element which is placed at the bottom of the drawing box. It consists of bars specially designed so as to assist a uniform supply of fresh concrete into the mould. The grid can be loose, fixed or movable with respect to the drawing box 3.3 feed hopper device that contains the mixture which is tra
47、nsported to the drawing box by a discharge gate or a dosing belt DIN EN 12629-2:2011-01 EN 12629-2:2002+A1:2010 (E) 6 3.4 draw plate integral system which is part of the assembly of the machine It is placed between the mould and the pallet board. It is designed to: provide the surface condition of t
48、he underside of the products; produce profiles to the underside of the product 3.5 vibration table equipment located beneath the mould and mounted on flexible suspension and features vibrators. Vibration is transmitted to the mould via the pallet board 3.6 internal pallet board transfer mechanism de
49、vice that feeds empty pallet boards beneath the mould and discharges the fresh products 3.7 tamper cleaning device device that automatically moves transversally to clean the moulding part of the tamper between two lots 3.8 face mix filling device part of a machine consisting of a frame, a hopper and a drawing box which can be connected to or removed from the main machine frame 3.9 pallet board wooden, metal or other material support placed during manufacturing between
