DIN EN ISO 10360-10-2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 Laser trackers for measurin.pdf

上传人:sofeeling205 文档编号:678379 上传时间:2018-12-26 格式:PDF 页数:51 大小:3.41MB
下载 相关 举报
DIN EN ISO 10360-10-2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 Laser trackers for measurin.pdf_第1页
第1页 / 共51页
DIN EN ISO 10360-10-2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 Laser trackers for measurin.pdf_第2页
第2页 / 共51页
DIN EN ISO 10360-10-2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 Laser trackers for measurin.pdf_第3页
第3页 / 共51页
DIN EN ISO 10360-10-2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 Laser trackers for measurin.pdf_第4页
第4页 / 共51页
DIN EN ISO 10360-10-2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 Laser trackers for measurin.pdf_第5页
第5页 / 共51页
点击查看更多>>
资源描述

1、March 2017 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.040.40!%bVI“2635138www.din.deDI

2、N EN ISO 10360-10Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring pointtopoint distances (ISO 1036010:2016);English version EN ISO 1036010:2016,English translation of DIN EN ISO 10360-10:2017-03G

3、eometrische Produktspezifikation (GPS) Annahmeprfung und Besttigungsprfung fr Koordinatenmessgerte (KMG) Teil 10: Lasertracker (ISO 1036010:2016);Englische Fassung EN ISO 1036010:2016,Englische bersetzung von DIN EN ISO 10360-10:2017-03Spcification gomtrique des produits (GPS) Essais de rception et

4、de vrification priodique des systmes mesurer tridimensionnels (SMT) Partie 10: Laser de poursuite pour mesurer les distances de point point (ISO 1036010:2016);Version anglaise EN ISO 1036010:2016,Traduction anglaise de DIN EN ISO 10360-10:2017-03www.beuth.deDocument comprises 51 pagesDTranslation by

5、 DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.03.17 DIN EN ISO 10360-10:2017-03 2 A comma is used as the decimal marker. National foreword This document (EN ISO 10360-10:2016) has been prepared by Technical Committee ISO/TC 213 “Dimensional and

6、geometrical product specifications and verification” in collaboration with Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was DIN-Normenausschuss Technische Grun

7、dlagen (DIN Standards Committee Technical Fundamentals), Working Committee NA 152-03-12 UA (GMA 3.31) Koordinatenmesstechnik. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 3650 DIN EN ISO 3650 ISO 10360-1 DIN EN ISO 10360-1 ISO 10360-

8、2 DIN EN ISO 10360-2 ISO 10360-5 DIN EN ISO 10360-5 ISO 10360-8 DIN EN ISO 10360-8 ISO 10360-9 DIN EN ISO 10360-9 ISO 14253-1 DIN EN ISO 14253-1 ISO 14638 DIN EN ISO 14638 ISO 17450-1:2011 DIN EN ISO 17450-1:2012-04 DIN EN ISO 10360-10:2017-03 3 National Annex NA (informative) Bibliography DIN EN IS

9、O 3650, Geometrical product specifications (GPS) Length standards Gauge blocks DIN EN ISO 10360-1, Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 1: Terms and definitions DIN EN ISO 10360-2, Geometrical product specifications

10、 (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions DIN EN ISO 10360-5, Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and

11、multiple stylus contacting probing systems DIN EN ISO 10360-8, Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 8: CMMs with optical distance sensors DIN EN ISO 10360-9, Geometrical product specifications (GPS) Acceptance and r

12、everification tests for coordinate measuring machines (CMM) Part 9: CMMs with multiple probing systems DIN EN ISO 14253-1, Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformity or nonconformity with spec

13、ifications DIN EN ISO 14638, Geometrical Product Specifications (GPS) Matrix model DIN EN ISO 17450-1:2012-04, Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) DIN EN ISO 10360-10:2017-03 4 This page is intentio

14、nally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10360-10 April 2016 ICS 17.040.30 English Version Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distance

15、s (ISO 10360-10:2016) Spcification gomtrique des produits (GPS) - Essais de rception et de vrification priodique des systmes mesurer tridimensionnels (SMT) - Partie 10: Laser de poursuite pour mesurer les distances de point point (ISO 10360-10:2016) Geometrische Produktspezifikation (GPS) - Annahmep

16、rfung und Besttigungsprfung fr Koordinatenmessgerte (KMG) - Teil 10: Lasertracker (ISO 10360-10:2016) This European Standard was approved by CEN on 15 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stand

17、ard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English

18、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bul

19、garia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, T

20、urkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members

21、. Ref. No. EN ISO 10360-10:2016 EEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms and definitions .74 Symbols . 105 Rated operating conditions 115.1 Environmental conditions 115.2 Operating conditions 116 Acceptance tests and reverification tests 126.1 General 126.2 Probi

22、ng size and form errors . 126.2.1 Principle . 126.2.2 Measuring equipment 136.2.3 Procedure 136.2.4 Derivation of test results 156.3 Location errors (two-face tests) . 156.3.1 Principle . 156.3.2 Measuring equipment 156.3.3 Procedure 156.3.4 Derivation of test results 166.4 Length errors . 166.4.1 G

23、eneral. 166.4.2 Principle . 176.4.3 Measuring equipment 176.4.4 Procedure 186.4.5 Derivation of test results 257 Compliance with specification 257.1 Acceptance tests . 257.2 Reverification tests . 268 Applications 268.1 Acceptance test 268.2 Reverification test . 278.3 Interim check . 279 Indication

24、 in product documentation and data sheets .27Annex A (informative) Forms 29Annex B (normative) Calibrated test lengths .32Annex C (normative) Thermal compensation of workpieces 34Annex D (informative) Achieving the alternative measuring volume .35Annex E (informative) Specification of MPEs 37Annex F

25、 (informative) Interim testing .40Annex G (normative) Testing of a stylus and retroreflector combination (SRC) .41Annex H (normative) Testing of an optical distance sensor and retroreflector combination (ODR) .44Annex I (informative) Relation to the GPS matrix model .46Bibliography .47Contents PageD

26、IN EN ISO 10360-10:2017-03 EN ISO 10360-10:2016 (E) 2Foreword 4European foreword This document (EN ISO 10360-10:2016) has been prepared by Technical Committee ISO/TC 213 “Dimensional and geometrical product specifications and verification“ in collaboration with Technical Committee CEN/TC 290 “Dimens

27、ional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national stan

28、dards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC I

29、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland

30、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10360-10:2016 has been approved by CEN as EN ISO 10360-10:2016 without any modific

31、ation. DIN EN ISO 10360-10:2017-03 EN ISO 10360-10:2016 (E) 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical commi

32、ttees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the I

33、nternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

34、different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO

35、shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this documen

36、t is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (T

37、BT), see the following URL: Foreword Supplementary information .The committee responsible for this document is ISO/TC 213, Dimensional and geometrical product specifications and verification.ISO 10360 consists of the following parts, under the general title Geometrical product specifications (GPS) A

38、cceptance and reverification tests for coordinate measuring machines (CMM) : Part 1: Vocabulary Part 2: CMMs used for measuring linear dimensions Part 3: CMMs with the axis of a rotary table as the fourth axis Part 4: CMMs used in scanning measuring mode Part 5: CMMs using single and multiple stylus

39、 contacting probing systems Part 6: Estimation of errors in computing of Gaussian associated features Part 7: CMMs equipped with imaging probing systemsISO 10360 also consists of the following parts, under the general title Geometrical product specifications (GPS) Acceptance and reverification tests

40、 for coordinate measuring systems (CMS) : Part 8: CMMs with optical distance sensors Part 9: CMMs with multiple probing systems Part 10: Laser trackers for measuring point-to-point distancesThe following part is under preparation: Part 12: Articulated-arm CMMsComputed tomography is to form the subje

41、ct of a future part 11DIN EN ISO 10360-10:2017-03 EN ISO 10360-10:2016 (E) 4 IntroductionThis part of ISO 10360 is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences link F of the chains of standards on size, distance, ra

42、dius, angle, form, orientation, location, and run-out.The ISO/GPS matrix model given in ISO 14638 gives an overview of the ISO/GPS system of which this document is a part. The fundamental rules of ISO/GPS given in ISO 8015 apply to this part of ISO 10360 and the default decision rules given in ISO 1

43、4253-1 apply to specifications made in accordance with this part of ISO 10360, unless otherwise indicated.More detailed information on the relation of this part of ISO 10360 to other standards and the GPS matrix model can be found in Annex I.The objective of this part of ISO 10360 is to provide a we

44、ll-defined testing procedure for a) laser tracker manufacturers to specify performance by maximum permissible errors (MPEs), and b) to allow testing of these specifications using calibrated, traceable test lengths, test spheres, and flats. The benefits of these tests are that the measured result has

45、 a direct traceability to the unit of length, the metre, and that it gives information on how the laser tracker will perform on similar length measurements.This part of ISO 10360 is distinct from that of ISO 10360-2, which is for coordinate measuring machines (CMMs) equipped with contact probing sys

46、tems, in that the orientation of the test lengths reflect the different instrument geometry and error sources within the instrument.DIN EN ISO 10360-10:2017-03 EN ISO 10360-10:2016 (E) 5 1 ScopeThis part of ISO 10360 specifies the acceptance tests for verifying the performance of a laser tracker by

47、measuring calibrated test lengths, test spheres and flats according to the specifications of the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the laser tracker. The acceptance and reverification tests given in this part of

48、ISO 10360 are applicable only to laser trackers utilizing a retro-reflector as a probing system. Laser trackers that use interferometry (IFM), absolute distance meter (ADM) measurement, or both can be verified using this part of ISO 10360. This part of ISO 10360 can also be used to specify and verify the relevant performance tests of other spherical coordinate measurement systems that use cooperative targets, such as “laser radar” systems.NOTE Systems, such as las

展开阅读全文
相关资源
  • DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdfDIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf
  • DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdfDIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf
  • DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdfDIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf
  • DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdfDIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf
  • DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdfDIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf
  • DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdfDIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf
  • DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdfDIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf
  • DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdfDIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf
  • DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdfDIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf
  • DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdfDIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > DIN

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1