1、February 2015 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 25.100.01; 25.060.20!%?cT“2286449www.din.deDDIN ISO 5610-13Tool holders with rectangular shank for indexable inserts Part 13: Style T (ISO 5610-13:2014),English translation of DIN ISO 5610-13:2015-02Klemmhalter mit Vierkantschaft fr Wendeschneidplatten Teil 13: Form T (ISO 5610-13:2014),Englische
3、bersetzung von DIN ISO 5610-13:2015-02Porte-plaquette queue rectangulaire pour plaquettes amovibles Partie 13: Forme T (ISO 5610-13:2014),Traduction anglaise de DIN ISO 5610-13:2015-02SupersedesDIN 4984-13:1987-06www.beuth.deDocument comprises 10 pagesIn case of doubt, the German-language original s
4、hall be considered authoritative.01.15A comma is used as the decimal marker. Contents Page National foreword 3 National Annex NA (informative) Bibliography . 4 1 Scope . 5 2 Normative references 5 3 Dimensions 5 3.1 General 5 3.2 Tool holder style T for triangular indexable insert shape T . 6 4 Desi
5、gnation . 8 5 Material 8 6 Design 8 6.1 Type of mounting 8 6.2 Corner radius, r9 6.3 Thickness, s, of indexable insert . 9 7 Extent of delivery 9 8 Marking . 9 Bibliography . 10 2DIN ISO 5610-13:2015-02 National foreword This document (EN ISO 5610-13:2014) has been prepared by Technical Committee IS
6、O/TC 29 “Small tools”, Subcommittee SC 9 “Tools with defined cutting edges, cutting items” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Werkzeuge und Spannzeuge (DIN Standards Committee Tools and Clamping Devices), Working Committee
7、 NA 121-01-12 AA Dreh- und Bohrwerkzeuge mit Wendeschneidplatten aus harten Schneidstoffen. This is the first edition of the DIN ISO 5610 series, and replaces the DIN 4984 series, which was the basis for this series of International Standards. Attention is drawn to the possibility that some of the e
8、lements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. DIN ISO 5610 consists of the following parts, under the general title Tool holders with rectangular shank for indexable inserts: Part 1: General s
9、urvey, correlation and determination of dimensions Part 2: Style A Part 3: Style B Part 4: Style D Part 5: Style F Part 6: Style G Part 7: Style J Part 8: Style K Part 9: Style L Part 10: Style N Part 11: Style R Part 12: Style S Part 13: Style T Part 14: Style H Part 15: Style V The DIN Standard co
10、rresponding to the International Standard referred to in this document is as follows: ISO 6987 DIN ISO 6987 Amendments This standard differs from DIN 4984-13:1987-06 as follows: a) the text of the International Standard has been adopted without any modification. Previous editions DIN 4984-13: 1980-0
11、4, 1987-06 DIN ISO 5610-13:2015-02 3National Annex NA (informative) Bibliography DIN 4000-1, Tabular layouts of properties Part 1: Concepts and principles DIN 4000-76, Tabular layouts of properties Part 76: Inserts, indexable DIN 4000-77, Tabular layouts of properties Part 77: Inserts, clamped, for
12、grooving, parting and thread machining DIN 4000-90, Tabular layouts of properties Part 90: Tool holders for indexable inserts DIN 4967-1, Indexable hardmetal inserts with rounded corners, with partly cylindrical hole 7 normal clearance DIN 4967-2, Indexable hardmetal inserts with rounded corners, wi
13、th partly cylindrical hole 11 normal clearance DIN 4968, Indexable hardmetal inserts with rounded corners, without fixation hole DIN 4969-1, Ceramic indexable inserts, with rounded corners, without fixing hole DIN 4983, Tool holders with rectangular shank and cartridges for indexable inserts Present
14、ation of the designation DIN 4988, Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole DIN 6580, Terminology of chip removing Movements and geometry of the chip removing process DIN 6581, Terminology of chip removing Reference systems and angles on the cutting part of th
15、e tool DIN 6582, Terminology of cutting Additional terms for the tool, wedge and the cutting edge DIN 6584, Terms of the cutting technique Forces, energy, work, power DIN ISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole Dimensions ISO/TS 13399-201,
16、Cutting tool data representation and exchange Part 201: Creation and exchange of 3D models Regular inserts ISO/TS 13399-202, Cutting tool data representation and exchange Part 202: Creation and exchange of 3D models Irregular inserts DIN ISO 5610-13:2015-02 4Tool holders with rectangular shank for i
17、ndexable inserts Part 13: Style T1 ScopeThis part of ISO 5610 specifies tool holders with rectangular shank, style T, i.e. with offset shank and cutting edge angle r= 60 for side cutting.These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials to
18、be mounted by clamping and to be used for turning operations.NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.2 Normative referen
19、cesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5
20、608:2012, Turning and copying tool holders and cartridges for indexable inserts DesignationISO 5610-1:2014, Tool holders with rectangular shank for indexable inserts Part 1: General survey, correlation and determination of dimensions3 Dimensions3.1 GeneralIt is not necessary for tool holders to comp
21、ly with the pictorial representation; only the dimensions given shall be observed.For determination of dimensions h1, f, and l1, see ISO 5610-1.For explanation of the designation code for tool holders, see ISO 5608.NOTE The values of rake angles and inclination angles shown in the figures are recomm
22、ended values; they can vary according to the application.DIN ISO 5610-13:2015-02 53.2 Tool holder style T for triangular indexable insert shape TKeyaInclination angle, s.bRake angle, o.NOTE This figure shows a right-hand tool holder (R); left-hand tool holder (L) laterally reversed.DIN ISO 5610-13:2
23、015-02 6Figure 1 Tool holder style T for triangular indexable insert TTable 1Dimensions in millimetresSymbolah1js13bh13l3af005+ ,h2h13l1ak16l2max.sbSTTCR 1212 1112 12 11 5 11 12 252,38STTCL 1212 11PTTNR 1212 113,18PTTNL 1212 11CTTPR 1212 11CTTPL 1212 11STTCR 1616 1616 16 16,5 7,2 13 16 323,97STTCL 1
24、616 16PTTNR 1616 164,76PTTNL 1616 16CTTPR 1616 163,18CTTPL 1616 16STTCR 2020 1620 20 16,5 7,2 17 20 323,97STTCL 2020 16PTTNR 2020 164,76PTTNL 2020 16CTTPR 2020 163,18CTTPL 2020 16STTCR 2525 1625 25 16,5 7,2 22 25 323,97STTCL 2525 16PTTNR 2525 164,76PTTNL 2525 16CTTPR 2525 163,18CTTPL 2525 16STTCR 32
25、25 1632 25 16,5 7,2 22 32 323,97STTCL 3225 16PTTNR 3225 164,76PTTNL 3225 16CTTPR 3225 163,18CTTPL 3225 16aFor the selection of length l1, the dash may be replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickne
26、ss without shim, if applicable.DIN ISO 5610-13:2015-02 7Symbolah1js13bh13l3af005+ ,h2h13l1ak16l2max.sbSTTCR 3232 2232 32 22 10 27 32 36 4,76STTCL 3232 22PTTNR 3232 22PTTNL 3232 22CTTPR 3232 22CTTPL 3232 22PTTNR 4040 2740 40 27,5 12,2 35 40 40 6,35PTTNL 4040 27aFor the selection of length l1, the das
27、h may be replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.4 DesignationA tool holder in accordance with this part of ISO 5610 shall be designated by the following:a) “Tool
28、holder”;b) a reference to this part of ISO 5610 (i.e. ISO 5610-13);c) type of mounting, in accordance with ISO 5608;d) symbol for indexable insert shape, in accordance with ISO 5608;e) symbol for tool style, in accordance with ISO 5608;f) symbol for the indexable insert normal clearance, in accordan
29、ce with ISO 5608;g) symbol for hand of tool, in accordance with ISO 5608;h) its height h1, width b, and length l1(symbol for tool length in accordance with ISO 5608);i) its cutting edge length l3.EXAMPLE Tool holder for a horizontally mounted, bore-clamped (P) triangular indexable insert shape T (T)
30、, tool holder style T (T), for normal clearance of indexable insert n= 0 (N), right-hand type (R), with height h1= 32 mm and width b = 25 mm (3225), length l1= 170 mm (P), for cutting edge length l3= 16,5 mm (16) is designated as follows:Tool holder ISO 5610-13 - PTTNR 3225 P165 MaterialThe material
31、 should be steel with a tensile strength of at least 1 200 N/mm2.6 Design6.1 Type of mountingStandard design of tool holders with indexable insert shall be mounted in accordance with Table 1.Table 1DIN ISO 5610-13:2015-02 8Other types of mounting are at the manufacturers discretion or upon agreement
32、. The letter symbol in the designation, symbol 1, shall then be replaced by the respective symbol for the chosen or agreed-upon type of mounting in accordance with ISO 5608.For the modified type of mounting deviating from Table 1, the relevant indexable insert thickness shall also be considered.6.2
33、Corner radius, rTool holders in accordance with this part of ISO 5610 can be equipped with indexable inserts with cutting edge length, l3, as specified in Table 1, and any corner radius, r.The values for a and f given in Table 1 and for l1in ISO 5610-1:2014, Table 2, apply to tool holders with index
34、able inserts having corner radii, r, in accordance with Table 2.Table 2Dimensions in millimetresl3r11 0,416,50,82227,5 1,2NOTE The values given for rare nominal values. The accurate values converted from the inch dimensions are 0,397 mm, 0,794 mm, and 1,191 mm.For indexable inserts with corner radii
35、, r, other than those specified in Table 2, the dimensions a, f, and l1shall be determined in accordance with ISO 5610-1.The tolerances for h1, f, and l1refer to dimensions measured with master indexable insert and master shim, if applicable.6.3 Thickness, s, of indexable insertThe values for thickn
36、ess, s, given in Table 1, apply to indexable inserts without shim and for the standard design of tool holders.For tool holders for indexable inserts with thicknesses deviating from the specified values, the thickness shall be indicated when ordering or upon delivery (in the handbook).7 Extent of del
37、iveryTool holders shall be delivered complete with clamping device, but without indexable insert(s).8 MarkingTool holders shall be marked with the letter symbol and the name or trademark of the manufacturer.Additional marking is at the manufacturers discretion or upon agreement.Deviations in marking
38、 may be by mutual agreement.A reference to this part of ISO 5610, i.e. ISO 5610-13:2014, shall be given on the packaging.DIN ISO 5610-13:2015-02 9Bibliography1 ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole Dimensions2 ISO 3002-1, Basic quantities in cutting
39、 and grinding Part 1: Geometry of the active part of cutting tools General terms, reference systems, tool and working angles, chip breakers3 ISO 3364, Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole Dimensions4 ISO 6987, Indexable hard material inserts with r
40、ounded corners, with partly cylindrical fixing hole Dimensions5 ISO/TS 13399-2, Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items6 ISO/TS 13399-3, Cutting tool data representation and exchange Part 3: Reference dictionary for tool itemsDIN ISO 5610-13:2015-02 10
