1、A-A-55432 m 9999974 0345537 722 m I INCH-POUND I A-A- 5543 2 26 August 1993 COMMERCIAL ITEM DESCRIPTION LIGHT, CHEMILUMINESCENT, 15 IN - 12 HR - B, E, F The General Services Administration has authorized the use of this commercial item description. Abstract. This description covers 12 hour 15 inch c
2、hemiluminescent lights (commonly known as a light wand) used for a variety of lighting, marking, and identification purposes. Salient characteristics. 1. Color. The colors of the chemiluminescent light described 0 in this CID are green, yellow and red. shall be identified in the Part Identification
3、Number (PIN) paragraph of this CID. The color wand required -.- . Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Commander, Space and Naval Warfare Command, ATTN: SPAWAR 003-114/031, Washington, DC 203
4、63. AMSC N/A FSC 6260 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesA-A-5 54 3 2 O 2. Desian. The chemiluminescent light shall be elongated having an overall length of 16 inches plus 0.340 or minus 0.203 inches. The diamete
5、r shall be .703 inches plus or minus 0.060 inches and have a flat base on one end. Each end shall also have an extended boss .406 inches nominal wide, with a hole .188 inches nominal. Wand shall be compatible with Handle, Light, Safety NSN 6260-01-255-3345. 3. Interior. The chemiluminescent lights s
6、pecified in this Commercial Item Description shall produce a level of light intensity as specified in Table I for a specified length of time (12 hours). 4. Material Safety Data Sheet. Manufacturer shall provide evidence in the form of a Material Safety Data Sheet (MSDS (Fed-Std-313) that the compone
7、nts shall not be highly toxic, toxic, corrosive or irritant in terms of the definitions and tests in Code of Federal Regulations, Title 16, Part 1500 (Federal Hazardous Substances Act). 5. Test criteria. Illuminance must meet or exceed the data presented in Table I. After Ageing Test, illuminance mu
8、st meet or exceed data in Table II. tube, breaking the inner vial and shaking to combine components. Plastic tube shall not leak and vial will not break when subjected to an external pressure equivalent to 30,000 feet at 75 degrees F in a vacuum chamber. Must withstand, while in wrapper, a free fall
9、 from a height of 8.5 feet on a hard surface (concrete) without activating or leakage. Activated by manually flexing the plastic 6. Test conditions. a. Meter: Digital Photometer, TEKTRONIX, Model 516, Sensor Probe 56501. All meters traceable to NIST. b. Wand to Meter Distance: 1.50 inches i 0.02 inc
10、hes. c. Temperature stabilization: Wands while still in sealed foil wrappers, will be placed in a water bath at test temperature for a minimum of one (1) hour before activation. d. Remove wand from sealed foil wrapper immediately before activation. Light wand shall be handled by cap end during testi
11、ng. 2 Licensed by Information Handling ServicesA-A-55 432 9999974 0145539 5T5 A-A-554 32 e. Activation method: Bend; agitate for fifteen (15) seconds. f. Wands shall be agitated for ten (10) seconds before each reading. 9. Wands kept under cover or in darkness; may be exposed to light during movemen
12、t to and from light meter. h. All meter readings made in darkness. i, Meter kept at 75 degrees F for all tests. j. Temperature tolerances: plus or minus 2 F. k. Holder, wand test fixture in accordance with DGSC drawing, DGSCV-91-03, Part Number 2. (Enclosure 1) 1, Chemiluminescent lights shall be he
13、ld in a vertical position with cap end down when light output measurement is made. m. Contractor certification. The contractor shall certify, and maintain objective quality evidence that the product offered to the Government meets the salient characteristics of this description and that the product
14、conforms to the producers own drawings, specifications, standards, and quality assurance practices and is the same produced as the manufacturers current product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. The Government reserves the right
15、 to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Ageing Test - test conditions to be added at a future date. Metric products. Products manufactured to metric dimensions will be considered on an equal b
16、asis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dim
17、ensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the Contracting Officer to determine if the product is acceptable. of accepting or rejecting the product. The Contracting Officer has the option 3 Licensed by Information Handling Servic
18、es03 m orm O0 o4 O mo dm o4 . co or* rlrl om O mm ON m w4 mor om 0 q rld ww ow . e mm mrl 4m m coo 034 mrl d mw mF dm . dm A-A-55432 r-m oco O0 . . r-rl . . 4 m . d F d 04 F dW o4 . O mco Nd ON . F Nor om . m om om . F ww mm om . d F4 e4 om m dor mm om N mm mm om . dm r-m oco O0 ON rlrl mm r-or . .
19、. . A-A-55432 m F O O W . N . 4d w w4 mr- dd e rl 7lm wm 4F N mm mr- rlm N O0 mr- m* . c(m E= VI pc 3 H U 2 I O H W U z W H wo mo om wo er- om O0 FN om mo OF mo om dm . do Nr- d . rl . 4 rl m E 7999974 0145540 217 ! 0; , 4 . L pc O c4 VI W 3 w a N +I O I- W U z I u n a fi w I- D z (y. W W oi 3 I- X
20、G H I- V) w I- FI 7 a 3 & w Q J o I 1 I 5 Licensed by Information Handling ServicesA-A-55432 9999974 0345542 0T I A-A-5 5 4 3 2 Requlatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. Quality ass
21、urance. Foil leakaqe. Samples will be tested for foil leakage by application of 6 psi air pressure into the inside of the foil wrap while submerged under water. A steady stream of air bubbles coming from any portion of the foil, except where the foil has been penetrated by the air supply shall be cl
22、assified as an airtight foil failure. Shelf life. Each chemiluminescent light shall have a minimum of 42 months life remaining at the time of delivery to the Government and must have been manufactured within 6 months of the date of delivery to the Government. Fluid Level. The vertical fluid level, w
23、hen measured from the exterior of the flat base shall be no less than 12.2 inches. Preservation, Dackaqinq, P ackinq, labelins, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order. Foil wrapping and all other packaging shall be mark
24、ed with manufacturers lot number and expiration date. Foil wrapping shall be color coded and contain operating instructions. CID based Part Identification Number. The following Part Identification Numbering procedure is for Government purposes and does not constitute a requirement for the contractor
25、. A-A-XXXXX-X B=GREEN E=RED F=YELLOW 6 Licensed by Information Handling ServicesA-A-55432 9999974 0145543 T2b A-A-5 5 4 3 2 Notes. Orderinq data. Acquisition documents must specify the following: a. Title, number, and date of this document. b. Material Safety Data Sheet MSDS) shall be provided to Co
26、ntracting Officer prior to award (FAR 52.223-3 and MSDS Page 2). c. Contracting Officer may request proof of certification of commercial item prior to first contract delivery (See 5). MILITARY INTEREST: CIVIL AGENCY COORDINATING ACTIVITY: MILITARY COORDINATING ACTIVITY: Custodians Navy-EC PREPARING ACTIVITY: Air Force-99 Reviewinq Activities DLA-GS AGENT : DLA-GS GSA-FSS Navy-EC 0- User Activities Navy-YD PROJECT NO. 6260-1023 FSC 6260 7 Licensed by Information Handling Services
