1、INCH-POUND MIL-DTL-13791/8 15 January 2009 DETAIL SPECIFICATION SHEET IGNITION DISTRIBUTOR ASSEMBLY, 4 CONNECTOR CAP This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this
2、specification sheet and MIL-DTL-13791. FIGURE 1. Distributor cap assembly. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/8 Inches mm Inches mm .003 0.08 2.750 69.85.010 0.25 3.000 76.201.574 39.98 3.064 80.371.984 50
3、39 3.188 80.982.562 65.07FIGURE 1. Distributor cap assembly - Continued. 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/8 Inches mm .08 2.03.250 6.35.336 8.53.344 8.74.771 19.583.438 87.33NOTES: 1. Dimensions are in inches. 2. Metric
4、 equivalents are given for information only. FIGURE 1. Distributor cap assembly - Continued. 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/8 4Dimensions and configurations: See figure 1. Referenced document. This document references
5、MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2920-2008-010) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
