1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, PLUG, CIRCULAR, THREADED, STRAIGHT, REMOVABLE CRIMP CONTACTS, SERIES III, METRIC This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall
2、consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Plug, classes F, G, J, K, M, P, R, S, T, W, X and Z. AMSC N/A FSC 5935 METRIC MIL-DTL-38999/26G 31 October 2011 SUPERSEDING MIL-DTL-38999/26F 2 June 2010 Provided by IHSNot for ResaleNo reproduction or networking permitted without lice
3、nse from IHS-,-,-MIL-DTL-38999/26G 2 Shell size Shell size code B dia + 0.2 - 0.0 B dia max H max K max S dia max Z max Z max (classes J and M only) 9 A 18.4 (.724) 20.6 (.811) 12 (.472) 19.0 (.748) 21.8 (.858) 31.0 (1.22) 31.5 (1.240) 11 B 21.1 (.830) 23.6 (.929) 14 (.551) 21.9 (.862) 25.0 (.984) 3
4、1.0 (1.22) 31.5 (1.240) 13 C 25.4 (.999) 28.2 (1.11) 16 (.629) 26.1 (1.03) 29.4 (1.157) 31.0 (1.22) 31.5 (1.240) 15 D 28.7 (1.129) 31.3 (1.23) 18 (.708) 29.3 (1.15) 32.5 (1.27) 31.0 (1.22) 31.5 (1.240) 17 E 32.2 (1.26) 34.5 (1.35) 20 (.787) 32.8 (1.29) 35.7 (1.40) 31.0 (1.22) 31.5 (1.240) 19 F 34.9
5、1.37) 37.3 (1.46) 22 (.866) 35.5 (1.39) 38.5 (1.51) 31.0 (1.22) 31.5 (1.240) 21 G 38.1 (1.49) 40.5 (1.59) 24 (.944) 38.7 (1.52) 41.7 (1.64) 31.0 (1.22) 31.5 (1.240) 23 H 41.1 (1.61) 43.7 (1.72) 26 (1.02) 41.7 (1.64) 44.9 (1.76) 31.0 (1.22) 31.5 (1.240) 25 J 44.3 (1.74) 46.8 (1.84) 28 (1.102) 44.9 (
6、1.76) 48.0 (1.88) 31.0 (1.22) 31.5 (1.240) NOTES: 1. Dimensions are in millimeters. 2. Inch equivalents are given for information only. FIGURE 1. Plug, classes F, G, J, K, M, P, R, S, T, W, X and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
7、 IHS-,-,-MIL-DTL-38999/26G 3 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. This connector mates with MIL-DTL-38999/20, /21, /22, /23, /24, /25 and /27. For insert arrangements: See MIL-STD-1560. Connector accessories: SAE-AS
8、85049. Part or Identifying Number (PIN) example: D38999/ 26 W A 35 P N DoD number prefix Specification sheet number Class Shell size code Insert arrangement Contact style Polarizing positions N is required for normal position Class F is not for Navy use and is inactive for Air Force new design use.
9、NOTE: The term PIN is equivalent to the term (part number, identification number, and type designator) which was previously used in this specification. Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were
10、 made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationsh
11、ip to the last previous issue. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MIL-DTL-38999/20 MIL-DTL-38999/21 MIL-DTL-38999/22 MIL-DTL-38999/23 MIL-DTL-38999/24 MIL-DTL-38999/25 MIL-DTL-38999/27 SAE-AS85049 Provided by IHSNot for ResaleNo r
12、eproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/26G 4 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy - AS Air Force 85 (Project 5935-2011-114) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities
13、 listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
