1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Radiation requirements added to drawing. Update to reflect latest changes in format and requirements. Editorial changes throughout. -les 04-01-29 Raymond Monnin B Update drawing as part of 5 year review. jt 12-09-12 C. SAFFLE REV SHEET REV SHEET
2、REV STATUS REV B B B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY Thanh V. Nguyen DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIE
3、S OF THE DEPARTMENT OF DEFENSE CHECKED BY Thanh V. Nguyen APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, , ECL, HEX ECL-TO-TTL TRANSLATOR, MONOLITHIC SILICON DRAWING APPROVAL DATE 93-01-22 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-91531 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E46
4、8-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product
5、 assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA)
6、levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 F 91531 01 M X A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1
7、 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A d
8、ash (-) indicates a non-RHA device. 1.2.2 Device type. The device type identify the circuit function as follows: Device type Generic number Circuit function 01 100325 Hex ECL-to-TTL translator 1.2.3 Device class designator. The device class designator is a single letter identifying the product assur
9、ance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline
10、s. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X GDIP5-T24 or CDIP6-T24 24 dual-in-line Y See figure 1 24 quad-flat 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or
11、MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute
12、maximum ratings. 1/ Supply voltage range (VEE) -7.0 V dc to +0.5 V dc Positive supply voltage range (VTTL) -0.5 V dc to +6.0 V dc Dc input voltage range (VIN) VEEto +0.5 V dc Dc input current range (IIN) . -30 mA to +5.0 mA Storage temperature range . -65C to +150C Maximum dc output current (IOUT) .
13、 -50 mA Maximum power dissipation (PD) 2/ . 805 mW Lead temperature (soldering, 10 seconds) . +300C Junction temperature (TJ) +175C Thermal resistance, junction-to-case (JC): Case X . See MIL-STD-1835 Case Y . 28C/W 1.4 Recommended operating conditions. Negative supply voltage range (VEE) . -5.7 V d
14、c minimim to 4.2 V dc maximum Positive supply voltage range (VTTL) . +4.5 Vdc minimum to +5.5 Vdc Maximum High level input voltage range (VIH) -1.165 V dc minimum to 0.870 V dc maximum Low level output voltage (VIL) . -1.830 V dc minimum to 1.475 V dc maximum Ambient operating temperature range (TC)
15、 . -55C to +125C 1.5 Radiation features. Maximum total dose available (dose rate = 50 300 rads(Si)/s) 300K rads(Si) 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specifie
16、d herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard M
17、icrocircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.dla.mil/quicksear
18、ch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Ma
19、ximum power dissipation is defined as VCCX ICC, and must withstand the added PDdue to short circuit test e.g., IOS. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 4
20、3218-3990 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unle
21、ss a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 as specified herein, or as modified in the device manufacturers Quality Management (QM) plan. The modification in th
22、e QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The desig
23、n, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein and figure 1. 3.2.2 Terminal connections.
24、The terminal connections shall be as specified on figure 2. 3.2.3 Truth table. The truth table shall be as specified on figure 3. 3.2.4 Test circuit and switching waveforms. The test circuit and switching waveforms shall be as specified on figure 4. 3.2.5 Radiation exposure circuit. The radiation ex
25、posure circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing and acquiring activity upon request. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the elect
26、rical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for
27、 each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of
28、not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/comp
29、liance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr
30、om IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TC +125C 1/ unless otherwise specified Group A subgroups Device type
31、Limits Unit Min Max High level output voltage VOHVTTL= 4.5 V, IOH= -2 mA 1, 2 All 2.5 V VIL= -1.83 V, 3 2.4 Low level output voltage VOLVIH= -0.87 V, IOL= 20 mA 1, 2, 3 All 0.5 V VEE= -5.7 V, -4.2 V Output reference voltage VBBVTTL= 5.0 V, VEE= -4.2 V, IVBB= -3.0 A 1, 2, 3 All -1.260 V VTTL= 5.0 V,
32、VEE= -5.7 V, IVBB= -2.1 mA 1, 2 -1.380 VTTL= 5.0 V, VEE= -5.7 V, IVBB= -3.0 mA 3 -1.396 Input voltage differential VDIFFVEE= -4.2 V, -5.7 V, 1, 2, 3 All 0.15 V Common mode voltage VCMVTTL=4.5 V 1, 2, 3 All -2.0 -0.5 V High level input current IIHVEE= -5.7 V, VTTL= 5.0 V, 1, 2 All 350 A VIN= -0.87 V
33、3 500 Low level input current IILVEE= -4.2 V, VTTL= 5.0 V, 1, 2, 3 All 0.5 A VIN= -1.83 V Negative power supply IEEVEE= -5.7 V, -4.2 V, 1, 2, 3 All -35 -12 mA drain current VTTL= 5.0 V Positive power supply ITTLVEE= -4.5 V, VTTL= 5.5 V, 1, 2, 3 All 65 mA drain current VIN= VBBOutput short circuit cu
34、rrent IOSVEE= -4.5 V, VTTL= 5.5 V, VOUT= 0.0 V 1, 2, 3 All -150 -60 mA Functional tests VEE= -5.7 V, -4.2 V, VIH= -1.023 V, VIL= -1.642 V, VTTL= 4.5 V, 5.5 V, See 4.4.1c. 7, 8 All Propagation delay time tPLH9 All 1.6 4.7 ns data to output, Dn to Qn tPLHSee figure 4 10 1.7 5.7 11 1.5 5.0 Transition t
35、ime, tTLH9 All 0.5 2.5 ns output 2/ tTHL10 0.5 2.5 11 0.5 3.0 1/ Pre and Post-irradiation values are identical unless otherwise specified in table I. When performing post-irradiation electrical measurements for any RHA level, TA= +25C. 2/ This parameter is provided as design information only (not te
36、sted but guaranteed). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 6 DSCC FORM 2234 APR 97 3.6 Certificate of compliance. For de
37、vice classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approv
38、ed source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-385
39、35 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of mi
40、crocircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification
41、and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the
42、 reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 31 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROC
43、IRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 Case Y Dimension Millimeters Inches Notes Min Max Min Max A 2.16 .085 b 0.41 0.46 .015 .019 c 0.10 0.15 .004 .007 D 22.10 28.45 .870 1.120 D1 9.40 10.16 .370 .400 4 E 22.10
44、 28.45 .870 1.120 E1 9.40 10.16 .370 .400 4 e 1.14 1.40 .045 .055 L 6.35 9.14 .250 .360 Q 0.89 1.27 .035 .050 5 S 1.91 .075 NOTES: 1. The preferred unit of measurement is millimeters. However, this item was designed using inch-pound units of measurement. In case problems involving conflicts between
45、the metric and inch-pound units, the inch-pound units shall rule. 2. Lead number 1 is identified by a tab located on the lead. 3. Lead numbers are shown for reference only and do not appear on the package. 4. Dimensions D1 and E1 allow glass meniscus. 5. Dimension Q shall be measured at the point of
46、 exit of the lead from the body. FIGURE 1. Case outline. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 De
47、vice type 01 01 Case outlines X Y Terminal number Terminal symbol Terminal symbol 1 Q5D 4 2 Q4D53 Q3D 5 4 VTTL Q55 VTTL Q46 VCCQ37 VCCVTTL 8 Q2VTTL 9 Q1VCC10 Q0VCC11 D 0 Q212 D0Q113 D 1 Q014 D1D 0 15 D 2 D016 D2D 1 17 VBB D118 VEED 2 19 D3D220 D 3 VBB 21 D4VEE22 D 4 D323 D5D 3 24 D 5 D4FIGURE 2. Ter
48、minal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91531 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 9 DSCC FORM 2234 APR 97 INPUTS OUTPUTS DnDn QnL H L H L H L L L H H L Open Open L VEEVEEL L VBB L H VBB H VBB L H VBB H L H = High voltage level. L = Low voltage level. FIGURE 3. Truth tables. Provided by IHSNot for ResaleNo reproduction or networking permitte
