1、 ETSI TS 122 022 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Personalisation of Mobile Equipment (ME); Mobile functionality specification (3GPP TS 22.022 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI
2、 ETSI TS 122 022 V15.0.0 (2018-07)13GPP TS 22.022 version 15.0.0 Release 15Reference RTS/TSGS-0122022vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non
3、 lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of
4、the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific ne
5、twork drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find err
6、ors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm exc
7、ept as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI lo
8、go are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and ow
9、ned by the GSM Association. ETSI ETSI TS 122 022 V15.0.0 (2018-07)23GPP TS 22.022 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IP
10、Rs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are av
11、ailable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which
12、are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and con
13、veys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ET
14、SI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM,
15、 UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the
16、ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 022 V15.0.0 (2018-07)33GPP TS 22.022 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3M
17、odal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Abbreviations . 6g33.2 Definitions 7g34 General description. 8g35 Network personalisation . 9g35.1 Network personalisation . 9g35.1.1 Operation of network personalised ME 9g35.1.2 Network pers
18、onalisation cycle 9g35.1.2.1 Personalisation cycle . 9g35.1.2.2 De-personalisation cycle . 10g35.2 Network subset personalisation 10g35.2.1 Operation of Network subset personalised ME 10g35.2.2 Network subset personalisation cycle . 11g35.2.2.1 Personalisation Cycle 11g35.2.2.2 De-personalisation cy
19、cle . 11g36 SP personalisation 11g36.1 Operation of SP personalised MEs . 12g36.2 SP personalisation cycle . 12g36.2.1 Personalisation cycle. 12g36.2.2 De-personalisation cycle . 13g37 Corporate personalisation . 13g37.1 Operation of corporate personalised MEs 13g37.2 Corporate personalisation cycle
20、 . 14g37.2.1 Personalisation cycle. 14g37.2.2 De-personalisation cycle . 14g38 SIM/USIM personalisation. 14g38.1 Operation of SIM/USIM personalised ME . 15g38.2 SIM/USIM personalisation cycle . 15g38.2.1 Personalisation cycle. 15g38.2.2 De-personalisation cycle . 16g39 Over the air de-personalisatio
21、n cycle . 16g310 Disable Personalisation 17g311 Manufacturer personalisation and de-personalisation 17g312 Automatic personalisation 17g313 Personalisation Cycle Restrictions . 17g314 Security. 18g3Annex A (normative): Technical information . 19g3A.1 GID1 and GID2 files 19g3A.2 Emergency calls only
22、mode . 19g3ETSI ETSI TS 122 022 V15.0.0 (2018-07)43GPP TS 22.022 version 15.0.0 Release 15A.3 Co-operative Network List . 20g3A.4 Over-the-air de-personalisation 20g3Annex B (informative): Change history . 22g3History 23g3ETSI ETSI TS 122 022 V15.0.0 (2018-07)53GPP TS 22.022 version 15.0.0 Release 1
23、5Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it wi
24、ll be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the
25、second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 022 V15.0.0 (2018-07)63GPP TS 22.022 version 15.0.0 Release 151 Scop
26、e The present document provides functional specifications of five features to personalise Mobile Equipment (ME) for GSM and 3G systems. These features are called: - Network personalisation; - Network subset personalisation; - Service Provider (SP) personalisation; - Corporate personalisation; - SIM/
27、USIM personalisation (SIM for GSM systems or USIM for 3G systems). The present document specifies requirements for MEs which provide these personalisation features. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present doc
28、ument. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (inclu
29、ding a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.011: “Service accessibility“. 3 3GPP TS 23.003: “ Numbering, addressing and identi
30、fication“. 4 3GPP TS 23.122: “Non-Access-Stratum (NAS) functions related to Mobile Station (MS) in idle mode“. 5 3GPP TS 23.038: “Alphabets and language-specific information“. 6 3GPP TS 23.040: “Technical realization of the Short Message Service (SMS); Point-to-Point (PP)“. 7 GSM 11.11: “Digital cel
31、lular telecommunications system (Phase 2+); Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface“. 8 GSM 11.14: “Digital cellular telecommunications system (Phase 2+); Specification of the SIM Application Toolkit for the Subscriber Identity Module - Mobile Equipmen
32、t (SIM - ME) interface“. 9 3GPP TS 31.102: “Characteristics of the USIM application“. 10 3GPP TS 31.111: “USIM Application Tool Kit“. 3 Definitions and abbreviations 3.1 Abbreviations For the purposes of the present document, the following abbreviations apply: ETSI ETSI TS 122 022 V15.0.0 (2018-07)7
33、3GPP TS 22.022 version 15.0.0 Release 15CCK Corporate Control Key CNL Co-operative Network List GID1 Group Identifier (level 1) GID2 Group Identifier (level 2) EF Elementary FileIMEI International Mobile Equipment Identity IMSI International Mobile Subscriber Identity MCC Mobile Country Code ME Mobi
34、le EquipmentMS GSM Mobile Station (ME + SIM) MNC Mobile Network Code NCK Network Control Key NSCK Network Subset Control Key PCK Personalisation Control KeySIM Subscriber Identity Module SMS Short Message Service SP Service Provider SPCK Service Provider Control Key TMSI Temporary Mobile Subscriber
35、Identity UE 3G User Equipment (ME + USIM) USIM User Services Identity Module Further GSM abbreviations are given in TS 21.905 1. 3.2 Definitions For the purposes of the present document, the following definitions apply: corporate personalisation: Allows a corporate customer to personalise MEs that h
36、e provides for his employees or customers use so that they can only be used with the companys own SIM/USIMs. de-personalisation: Is the process of deactivating the personalisation so that the ME ceases to carry out the verification checks. network personalisation: Allows the network operator to pers
37、onalise a ME so that it can only be used with that particular network operators SIM/USIMs network subset personalisation: A refinement of network personalisation, which allows network operators to limit the usage of a ME to a subset of SIM/USIMs normal mode of operation: Is the mode of operation int
38、o which the ME would have gone if it had no personalisation checks to process. personalisation: Is the process of storing information in the ME and activating the procedures which verify this information against the corresponding information stored in the SIM/USIM whenever the ME is powered up or a
39、SIM/USIM is inserted, in order to limit the SIM/USIMs with which the ME will operate. SIM/USIM personalisation: Enables a user to personalise a ME so that it may only be used with particular SIM/USIM(s). SP personalisation: Allows the service provider to personalise a ME so that it can only be used
40、with that particular service providers SIM/USIMs. user: Normally refers to the person performing the personalisation or de-personalisation operations and may represent a network operator, service provider, manufacturer of the user/owner of the handset, depending on the context. network code: MCC and
41、 MNC. network subset code: digits 6 and 7 of the IMSI. SP code: code which when combined with the network code refers to a unique SP. The code is provided in the GID1 file on the SIM/USIM (see Annex A.1.) and is correspondingly stored on the ME. ETSI ETSI TS 122 022 V15.0.0 (2018-07)83GPP TS 22.022
42、version 15.0.0 Release 15Corporate code: code which when combined with the network and SP codes refers to a unique Corporate. The code is provided in the GID2 file on the SIM/USIM (see Annex A.1.) and is correspondingly stored on the ME. SIM/USIM code: code which when combined with the network and N
43、S codes refers to a unique SIM/USIM. The code is provided by the digits 8 to 15 of the IMSI network code group: same as network code network subset code group: combination of a network subset code and the associated network code. SP code group: combination of the SP code and the associated network c
44、ode. Corporate code group: combination of the Corporate code and the associated SP and network codes. SIM/USIM code group: combination of the SIM/USIM code and the associated network subset and network codes (it is equivalent to the IMSI). Personalisation entity: Network, network subset, SP, Corpora
45、te or SIM/USIM to which the ME is personalised 4 General description The personalisation features work by storing information in the ME which limits the IMs with which it will operate, and by checking this information against the SIM/USIM whenever the ME is powered up or a SIM/USIM is inserted. If a
46、 check fails, the ME enters the “limited service state“ in which only emergency calls can be attempted (see annex A.2). There are five personalisation categories of varying granularity; network, network subset, SP, corporate and SIM/USIM. The personalisation categories are independent in so far as e
47、ach category can be activated or de-activated regardless of the status of the others. Each category has a separate personalisation indicator to show whether it is active or not. The ME can be personalised to one network, one network subset, one SP, one Corporate, one SIM/USIM or any combination ther
48、eof. The ME may optionally be personalised to multiple networks, network subsets, SPs, Corporates, IMs or any combinations thereof. The codes used for each personalisation category are shown in Table 1. Some categories require several codes (e.g. SP and network for SP personalisation) and each combi
49、nation of codes relating to a particular entity (network, SP etc.) is referred to as a code group. To personalise to multiple entities, multiple code groups are stored in the ME. For each activated personalisation category, the ME retrieves the relevant codes from the SIM/USIM and checks the retrieved code group against the (list of) code group(s) stored in the ME. If a match is found with any of the code groups stored in the ME, the check is passed for that category. If checks for all active categories are passed, then the MS goes into normal op
