1、 ETSI TS 124 093 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Completion of Calls to Busy Subscriber (CCBS); Stage 3 (3GPP TS 24.093 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUN
2、ICATIONSRETSI ETSI TS 124 093 V15.0.0 (2018-07)13GPP TS 24.093 version 15.0.0 Release 15Reference RTS/TSGC-0424093vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Associatio
3、n but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print ver
4、sions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a sp
5、ecific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you
6、 find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micr
7、ofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand th
8、e ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks register
9、ed and owned by the GSM Association. ETSI ETSI TS 124 093 V15.0.0 (2018-07)23GPP TS 24.093 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these ess
10、ential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updat
11、es are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web serve
12、r) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI
13、, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produ
14、ced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference bet
15、ween GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.
16、2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 093 V15.0.0 (2018-07)33GPP TS 24.093 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Forewo
17、rd . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 General . 7g34.1 Overview 7g34.2 Activation . 7g34.3 CCBS Recall and CCBS Call Set-up 9g34.3.1 CCBS Call Set-up (MS A idle) . 9g34.3.2 CCBS Cal
18、l Set-up (MS A not idle) . 11g34.3.2.1 Existing call released. 11g34.3.2.2 Existing call placed on hold 13g34.4 Deactivation . 15g34.5 Interrogation . 16g3Annex A (informative): Operation for non-supporting MSs 18g3A.0 Scope 18g3A.1 MSs which do not support CCBS . 18g3A.1.1 Activation for non-suppor
19、ting MSs 18g3A.2 CCBS Call Set-up for non-supporting MSs . 20g3A.3 Deactivation for non-supporting MSs 21g3A.4 Interrogation for non-supporting MSs 21g3Annex B (informative): Change history . 22g3History 23g3ETSI ETSI TS 124 093 V15.0.0 (2018-07)43GPP TS 24.093 version 15.0.0 Release 15Foreword This
20、 Technical Specification has been produced by the 3GPP. This TS gives the stage 3 description of the Completion of Calls to Busy Subscriber (CCBS) supplementary service within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following
21、 formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval;
22、 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124
23、093 V15.0.0 (2018-07)53GPP TS 24.093 version 15.0.0 Release 151 Scope The present dcoument gives the stage 3 description of the Completion of Calls to Busy Subscriber (CCBS) supplementary service. The present document specifies the procedures used at the radio interface (Reference point Um as define
24、d in 3GPP TS 24.002) for normal operation, activation, deactivation, invocation and interrogation of the completion of calls to busy subscriber supplementary services. Provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provide
25、r and cause no signalling on the radio interface. In 3GPP TS 24.010 the general aspects of the specification of supplementary services at the layer 3 radio interface are given. 3GPP TS 24.080 specifies the formats and coding for the supplementary services. Definitions and descriptions of supplementa
26、ry services are given in 3GPP TS 22.004, 3GPP TS 22.08x and 3GPP TS 22.09x-series. Technical specification 3GPP TS 22.093 is related specifically to the Completion of Calls to Busy Subscriber supplementary service. The technical realization of supplementary services is described in technical specifi
27、cations 3GPP TS 23.011, 3GPP TS 23.08x and 3GPP TS 23.09x-series. 3GPP TS 23.093 is related specifically to Completion of Calls to Busy Subscriber supplementary service. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in 3
28、GPP TS 24.007 and 3GPP TS 24.008. The following supplementary services belong to the call completion supplementary services and are described in the present document: - Completion of Calls to Busy Subscriber (CCBS) (see clause 4). 2 References The following documents contain provisions which, throug
29、h reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the late
30、st version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “Gene
31、ral on supplementary services“. 3 3GPP TS 22.007: “Mobile Stations (MS) features“. 4 3GPP TS 22.030: “Man-Machine Interface (MMI) of the Mobile Station (MS)“. 5 3GPP TS 22.093: “Completion of Calls to Busy Subscriber (CCBS) Service description, Stage 1“. 6 3GPP TS 23.011: “Technical realization of s
32、upplementary services“. 7 3GPP TS 23.093: “Technical realization of Completion of Calls to Busy Subscriber (CCBS)“. 8 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLMN) access reference configuration“. 9 3GPP TS 24.007: “Mobile radio interface signalling layer 3 General aspects“. 10 3GPP TS
33、 24.008: “Mobile radio interface layer 3 specification“. ETSI ETSI TS 124 093 V15.0.0 (2018-07)63GPP TS 24.093 version 15.0.0 Release 1511 3GPP TS 24.010: “Mobile radio interface layer 3 Supplementary services specification General aspects“. 12 3GPP TS 24.080: “Mobile radio interface layer 3 supplem
34、entary services specification Formats and coding“. 13 3GPP TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document the following definitions apply. Subscriber A: The user of MS A, r
35、equesting CCBS. Destination B: The entity addressed in the original call set up, which is busy when first called by subscriber A. 3.2 Abbreviations For the purposes of the present document the following abbreviations apply: CCBS Completion of Calls to Busy Subscriber MS A Mobile Station of subscribe
36、r A NDUB Network Determined User Busy Further related abbreviations are given in 3GPP TR 21.905 ETSI ETSI TS 124 093 V15.0.0 (2018-07)73GPP TS 24.093 version 15.0.0 Release 154 General 4.1 Overview CCBS allows a calling subscriber A, encountering a Network Determined User Busy (NDUB) called destinat
37、ion B, to be notified when destination B is idle and to have the network reinitiate the call to destination B, if subscriber A desires. All of the radio signalling specific to CCBS is at the subscriber A-side. Each procedure is described in turn. There is no radio signalling specific to CCBS at dest
38、ination B-side. The radio signalling on the destination B-side uses basic call signalling procedures only. A mobile station that supports CCBS shall support the requirements of the following options used in 3GPP TS 24.008: 1) Prolonged Clearing Procedure; 2) Network Initiated Mobile Originated Conne
39、ction Management (MO CM) Connection Request; 3) Network initiated MO call. A network supporting CCBS shall support the requirements of the following options used in 3GPP TS 24.008: 1) CCBS Request activation; and 2) Network initiated MO call. 4.2 Activation When CCBS is allowed the network shall giv
40、e subscriber A the option of activating a CCBS Request. The network shall send a DISCONNECT message to MS A (cause #17 (User Busy) or cause #34 (no circuit / channel available) with diagnostic field indicating CCBS is Possible and allowed actions indicating CCBS is Possible. The network starts the r
41、etention timer T1 when it sends the DISCONNECT message. The MS shall not release the connection with the network if allowed actions is present. If subscriber A attempts to activate a CCBS Request, MS A shall send a RELEASE message, with the Facility information element indicating CCBSRequest and the
42、 network shall stop T1. If the subscriber A does not accept CCBS activation, the MS shall send normal RELEASE message and the network shall stop T1 and continue normal call clearing. If the timer T1 expires before the RELEASE message is received from the MS, the network shall continue normal call cl
43、earing. If the network accepts the activation attempt, it shall acknowledge it by sending a RELEASE COMPLETE message containing the Facility information element with the CCBS index and optionally the AddressOfB, SubAddressOfB and the BasicServiceCode. If the network rejects the activation attempt, i
44、t shall send a RELEASE COMPLETE message containing the Facility information element with a return error indication. If a TCH has been allocated for the initial call and there are no further need for this channel configuration, the network may reconfigure the ongoing connection from TCH(s) mode to SD
45、CCH only mode while waiting for further user input activity. It is a network option to maintain the ongoing connection in TCH mode while waiting for further user input activity. SS Version Indicator value 3 or above has to be used. ETSI ETSI TS 124 093 V15.0.0 (2018-07)83GPP TS 24.093 version 15.0.0
46、 Release 15MS A NETWORK SETUP (Note 1) - (Bearer capability, CC capabilities, Called party BCD number) DISCONNECT (Note 2) RELEASE COMPLETE RELEASE - Facility (Invoke = AccessRegisterCCEntry) RELEASE COMPLETE CM SERVICE PROMPT MM_STATUS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
47、 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Cause #32 (Service option not supported) / Cause #34 (Service option temporarily out of order) / Cause #97 (message type non-existent or not implemented) CC ESTABLISHMENT (BC(s), (Note 1) RELEASE COMPLETE - - - - - - -
48、 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Cause #29 (facility rejected) / Cause #88 (incompatible destination) / Cause #17 ( User Busy) (Note 2) RECALL (Cause #21 (call rejected) / Cause #17 (User Busy) / Cause #68 (ACM ACMmax) (Note 4) RELEASE COMPLETE (Note 6) Figure 4.3.1: CCBS Call Set-up for supporting MSs - subscriber A idle when RECALL arrives NOTE 1: The BC may be modified by the MS as long as the same Basic Service Group is maintained. NOTE 2: The MS releases the transaction if th
