1、 ETSI TS 1Universal Mobile TelUICCUniversal Subsapplica(3GPP TS 31.1TECHNICAL SPECIFICATION131 121 V13.2.0 (2016elecommunications System (LTE; CC-terminal interface; bscriber Identity Module (USIMcation test specification .121 version 13.2.0 Release 1316-04) (UMTS); SIM) 13) ETSI ETSI TS 131 121 V13
2、.2.0 (2016-04)13GPP TS 31.121 version 13.2.0 Release 13Reference RTS/TSGC-0631121vd20 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la
3、Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document sha
4、ll not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI
5、Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, pleas
6、e send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permi
7、ssion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand th
8、e ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 131
9、121 V13.2.0 (2016-04)23GPP TS 31.121 version 13.2.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-member
10、s, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant t
11、o the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document.
12、 Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to th
13、e corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ an
14、d “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 131 121 V13.2.0 (2016-04)33GPP TS 31.121 version 13.2.0
15、 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 18g3Introduction 18g31 Scope 19g32 References 19g33 Definitions, symbols, abbreviations and coding . 21g33.1 Definitions 21g33.2 Symbols 22g33.3 Abbreviations . 22g33.4 Coding Conventions . 24g33.
16、5 Generic procedures for E-UTRAN/UTRAN/GERAN/IMS . 24g33.6 Applicability . 24g33.6.1 Applicability of the present document 24g33.6.2 Applicability to terminal equipment . 24g33.6.3 Applicability of the individual tests 24g33.7 Table of optional features . 25g33.8 Applicability table 27g34 Default Va
17、lues 40g34.1 Definition of default values for USIM-Terminal interface testing (Default UICC) . 40g34.1.1 Values of the EFs (Default UICC) . 40g34.1.1.1 EFIMSI(IMSI) 40g34.1.1.2 EFAD(Administrative Data) 40g34.1.1.3 EFLOCI(Location Information) 40g34.1.1.4 EFKeys(Ciphering and Integrity Keys) 41g34.1
18、.1.5 EFKeysPS(Ciphering and Integrity Keys for Packet Switched domain) 41g34.1.1.6 EFACC(Access Control Class) . 41g34.1.1.7 EFFPLMN(Forbidden PLMNs) 41g34.1.1.8 EFUST(USIM Service Table) 41g34.1.1.9 EFEST(Enable Service Table) 42g34.1.1.10 EFADN(Abbreviated Dialling Number) . 42g34.1.1.11 EFPLMNwAC
19、T(User Controlled PLMN Selector with Access Technology) 42g34.1.1.12 EFOPLMNwACT(Operator Controlled PLMN Selector with Access Technology) 43g34.1.1.13 Void. 43g34.1.1.14 PIN 43g34.1.1.15 PIN2 44g34.1.1.16 Unblock PIN . 44g34.1.1.17 Unblock PIN2 . 44g34.1.1.18 Other Values of the USIM 44g34.1.1.19 E
20、FPSLOCI(Packet Switch Location Information) 44g34.1.1.20 Universal PIN 44g34.1.1.21 Unblock Universal PIN . 45g34.2 Definition of FDN UICC 45g34.2.1 Values of the EFs (FDN UICC) . 45g34.2.1.1 EFUST(USIM Service Table) 45g34.2.1.2 EFEST(Enable Service Table) 45g34.2.1.3 EFFDN(Fixed Dialling Numbers)
21、45g34.2.1.4 EFECC(Emergency Call Codes) . 46g34.2.1.5 Other Values of the USIM 46g34.3 Void 47g34.4 Definition of E-UTRAN/EPC UICC 47g3ETSI ETSI TS 131 121 V13.2.0 (2016-04)43GPP TS 31.121 version 13.2.0 Release 134.4.1 EFUST(USIM Service Table) 47g34.4.2 EFEPSLOCI(EPS Information) . 47g34.4.3 EFPLM
22、NwACT(User Controlled PLMN Selector with Access Technology) 47g34.4.4 EFOPLMNwACT(Operator Controlled PLMN Selector with Access Technology) 48g34.4.5 EFACSGL(Allowed CSG Lists) . 49g34.4.6 EFCSGT(CSG Type) . 49g34.4.7 EFHNBN(Home (e)NodeB Name) 51g34.4.8 EFEPSNSC(EPS NAS Security Context) . 52g34.5
23、Definition of E-UTRAN/EPC ISIM-UICC 53g34.5.1 Applications on the E-UTRAN/EPC ISIM-UICC 53g34.5.2 Default USIM values on E-UTRAN/EPC ISIM-UICC . 53g34.5.3 Default ISIM values on E-UTRAN/EPC ISIM-UICC 53g34.5.3.1 EFAD(Administrative Data) 53g34.5.3.2 EFIST(ISIM Service Table) . 53g34.5.3.3 EFIMPI(IMS
24、 private user identity) . 53g34.5.3.4 EFDOMAIN(Home Network Domain Name) . 54g34.5.3.5 EFIMPU(IMS public user identity) . 54g34.5.3.6 EFP-CSCF(P-CSCF ADDRESS) . 55g34.5.3.7 EFSMS(Short Message Service) . 55g34.5.3.8 EFSMSR(Short message status reports) 55g34.5.3.9 EFSMSP(Short message service parame
25、ters) 56g34.5.3.10 EFSMSS(SMS Status) . 56g34.5.4 Default values at DF_TELECOM . 56g34.5.4.1 EFPSISMSC(Public Service Identity of the SM-SC) 56g34.6 Definition of ACSGL/OCSGL E-UTRAN/EPC UICC 57g34.6.1 EFUST(USIM Service Table) 57g34.6.2 EFAD(Administrative Data) 57g34.6.3 EFOCSGL(Operator CSG Lists
26、) 57g34.6.4 EFOCSGT(Operator CSG Type) 58g34.6.5 EFOHNBN(Operator Home (e)NodeB Name) . 59g34.7.1 Values of the EFs 61g34.7.1.1 EFUST(USIM Service Table) 61g34.7.1.2 EFNASCONFIG(Non Access Stratum Configuration) 61g35 Subscription related tests 62g35.1 IMSI / TMSI handling 62g35.1.1 UE identificatio
27、n by short IMSI . 62g35.1.1.1 Definition and applicability . 62g35.1.1.2 Conformance requirement. 62g35.1.1.3 Test purpose 62g35.1.1.4 Method of test . 62g35.1.1.4.1 Initial conditions 62g35.1.1.4.2 Procedure . 63g35.1.1.5 Acceptance criteria 63g35.1.2 UE identification by short IMSI using a 2 digit
28、 MNC 63g35.1.2.1 Definition and applicability . 63g35.1.2.2 Conformance requirement. 63g35.1.2.3 Test purpose 63g35.1.2.4 Method of test . 63g35.1.2.4.1 Initial conditions 63g35.1.2.4.2 Procedure . 64g35.1.2.5 Acceptance criteria 65g35.1.3 UE identification by “short“ TMSI . 65g35.1.3.1 Definition a
29、nd applicability . 65g35.1.3.2 Conformance requirement. 65g35.1.3.3 Test purpose 65g35.1.3.4 Method of test . 65g35.1.3.4.1 Initial conditions 65g35.1.3.4.2 Procedure . 66g35.1.3.5 Acceptance criteria 66g35.1.4 UE identification by “long“ TMSI 66g35.1.4.1 Definition and applicability . 66g3ETSI ETSI
30、 TS 131 121 V13.2.0 (2016-04)53GPP TS 31.121 version 13.2.0 Release 135.1.4.2 Conformance requirement . 66g35.1.4.3 Test purpose 67g35.1.4.4 Method of test . 67g35.1.4.4.1 Initial conditions 67g35.1.4.4.2 Procedure . 67g35.1.4.5 Acceptance criteria 68g35.1.5 UE identification by long IMSI, TMSI upda
31、ting and key set identifier assignment . 68g35.1.5.1 Definition and applicability . 68g35.1.5.2 Conformance requirement. 68g35.1.5.3 Test purpose 68g35.1.5.4 Method of test . 69g35.1.5.4.1 Initial conditions 69g35.1.5.4.2 Procedure . 69g35.1.5.5 Acceptance criteria 70g35.1.6 UE identification by sho
32、rt IMSI when accessing E-UTRAN/EPC . 71g35.1.6.1 Definition and applicability . 71g35.1.6.2 Conformance requirement . 71g35.1.6.3 Test purpose 71g35.1.6.4 Method of test . 71g35.1.6.4.1 Initial conditions 71g35.1.6.4.2 Procedure . 71g35.1.6.5 Acceptance criteria 71g35.1.7 UE identification by short
33、IMSI using a 2 digit MNC when accessing E-UTRAN/EPC . 72g35.1.7.1 Definition and applicability . 72g35.1.7.2 Conformance requirement . 72g35.1.7.3 Test purpose 72g35.1.7.4 Method of test . 72g35.1.7.4.1 Initial conditions 72g35.1.7.4.2 Procedure . 73g35.1.7.5 Acceptance criteria 73g35.1.8 UE identif
34、ication after changed IMSI with service “EMM Information“ not available . 73g35.1.8.2 Conformance requirement . 73g35.1.8.3 Test purpose 74g35.1.8.4 Method of test . 74g35.1.8.4.1 Initial conditions 74g35.1.8.4.2 Procedure . 74g35.1.8.5 Acceptance criteria 74g35.1.9 UE identification by GUTI when us
35、ing USIM with service “EMM Information“ not available 74g35.1.9.2 Conformance requirement . 75g35.1.9.3 Test purpose 75g35.1.9.4 Method of test . 75g35.1.9.4.1 Initial conditions 75g35.1.9.4.2 Procedure . 75g35.1.9.5 Acceptance criteria 76g35.1.10 UE identification by GUTI when using USIM with servi
36、ce “EMM Information“ available 76g35.1.10.1 Definition and applicability . 76g35.1.10.2 Conformance requirement . 76g35.1.10.3 Test purpose 76g35.1.10.4 Method of test . 76g35.1.10.4.1 Initial conditions 76g35.1.10.4.2 Procedure . 77g35.1.10.5 Acceptance criteria 77g35.2 Access Control handling 77g3
37、5.2.1 Access Control information handling . 77g35.2.1.1 Definition and applicability . 77g35.2.1.2 Conformance requirement. 78g35.2.1.3 Test purpose 78g35.2.1.4 Method of test . 78g35.2.1.4.1 Initial conditions 78g35.2.1.4.2 Coding details 79g35.2.1.4.3 Procedure . 79g35.2.1.5 Acceptance criteria 79
38、g3ETSI ETSI TS 131 121 V13.2.0 (2016-04)63GPP TS 31.121 version 13.2.0 Release 135.2.2 Access Control information handling for E-UTRAN/EPC . 91g35.2.2.1 Definition and applicability . 91g35.2.2.2 Conformance requirement. 91g35.2.2.3 Test purpose 91g35.2.2.4 Method of test . 91g35.2.2.4.1 Initial con
39、ditions 91g35.2.2.4.2 Coding details 92g35.2.2.4.3 Procedure . 92g35.2.2.5 Acceptance criteria 92g36 Security related Tests . 104g36.1 PIN handling 104g36.1.1 Entry of PIN 104g36.1.1.1 Definition and applicability . 104g36.1.1.2 Conformance requirement. 104g36.1.1.3 Test purpose 104g36.1.1.4 Method
40、of test . 104g36.1.1.4.1 Initial conditions 104g36.1.1.4.2 Procedure . 104g36.1.1.5 Acceptance criteria 104g36.1.2 Change of PIN 105g36.1.2.1 Definition and applicability . 105g36.1.2.2 Conformance requirement. 105g36.1.2.3 Test purpose 105g36.1.2.4 Method of test . 105g36.1.2.4.1 Initial conditions
41、 105g36.1.2.4.2 Procedure . 105g36.1.2.5 Acceptance criteria 105g36.1.3 Unblock PIN . 106g36.1.3.1 Definition and applicability . 106g36.1.3.2 Conformance requirement. 106g36.1.3.3 Test purpose 106g36.1.3.4 Method of test . 106g36.1.3.4.1 Initial conditions 106g36.1.3.4.2 Procedure . 106g36.1.3.5 Ac
42、ceptance criteria 107g36.1.4 Entry of PIN2 107g36.1.4.1 Definition and applicability . 107g36.1.4.2 Conformance requirement. 107g36.1.4.3 Test purpose 107g36.1.4.4 Method of test . 107g36.1.4.4.1 Initial conditions 107g36.1.4.4.2 Procedure . 108g36.1.4.5 Acceptance criteria 108g36.1.5 Change of PIN2
43、 108g36.1.5.1 Definition and applicability . 108g36.1.5.2 Conformance requirement. 108g36.1.5.3 Test purpose 108g36.1.5.4 Method of test . 108g36.1.5.4.1 Initial conditions 108g36.1.5.4.2 Procedure . 108g36.1.5.5 Acceptance criteria 109g36.1.6 Unblock PIN2 . 109g36.1.6.1 Definition and applicability
44、 . 109g36.1.6.2 Conformance requirement. 109g36.1.6.3 Test purpose 109g36.1.6.4 Method of test . 109g36.1.6.4.1 Initial conditions 109g36.1.6.4.2 Procedure . 109g36.1.6.5 Acceptance criterias 110g36.1.7 Replacement of PIN 111g36.1.7.1 Definition and applicability . 111g3ETSI ETSI TS 131 121 V13.2.0
45、(2016-04)73GPP TS 31.121 version 13.2.0 Release 136.1.7.2 Conformance requirement . 111g36.1.7.3 Test purpose 111g36.1.7.4 Method of test . 111g36.1.7.4.1 Initial conditions 111g36.1.7.4.2 Procedure . 111g36.1.7.5 Acceptance criteria 111g36.1.8 Change of Universal PIN 112g36.1.8.1 Definition and app
46、licability . 112g36.1.8.2 Conformance requirement. 112g36.1.8.3 Test purpose 112g36.1.8.4 Method of test . 112g36.1.8.4.1 Initial conditions 112g36.1.8.4.2 Procedure . 112g36.1.8.5 Acceptance criteria 113g36.1.9 Unblock Universal PIN . 113g36.1.9.1 Definition and applicability . 113g36.1.9.2 Conform
47、ance requirement. 113g36.1.9.3 Test purpose 113g36.1.9.4 Method of test . 113g36.1.9.4.1 Initial conditions 113g36.1.9.4.2 Procedure . 113g36.1.9.5 Acceptance criteria 114g36.1.10 Entry of PIN on multi-verification capable UICCs . 114g36.1.10.1 Definition and applicability . 114g36.1.10.2 Conformanc
48、e requirement. 114g36.1.10.3 Test purpose 114g36.1.10.4 Method of test . 114g36.1.10.4.1 Initial conditions 114g36.1.10.4.2 Procedure . 115g36.1.10.5 Acceptance criteria 115g36.1.11 Change of PIN on multi-verification capable UICCs . 115g36.1.11.1 Definition and applicability . 115g36.1.11.2 Conform
49、ance requirement. 115g36.1.11.3 Test purpose 116g36.1.11.4 Method of test . 116g36.1.11.4.1 Initial conditions 116g36.1.11.4.2 Procedure . 116g36.1.11.5 Acceptance criteria 117g36.1.12 Unblock PIN on multi-verification capable UICCs 117g36.1.12.1 Definition and applicability . 117g36.1.12.2 Conformance requirement. 117g36.1.12.3 Test purpose 117g36.1.12.4 Method of test . 117g36.1.12.4.1 Initial conditions 117g36.1.12.4.2 Procedure . 118g36.1.12.5 Acceptance criteria 119g36.1.13 Entry of PIN2 on multi-verification capable UICCs . 119g36.1.13.1 Definition and applicability .
