1、 ETSI TS 134 121-1 V14.1.0 (2017-03) Universal Mobile Telecommunications System (UMTS); User Equipment (UE) conformance specification; Radio transmission and reception (FDD); Part 1: Conformance specification (3GPP TS 34.121-1 version 14.1.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 134 121-1
2、 V14.1.0 (2017-03)13GPP TS 34.121-1 version 14.1.0 Release 14Reference RTS/TSGR-0534121-1ve10 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre
3、 la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document
4、 shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within E
5、TSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present d
6、ocument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by
7、 written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM
8、, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETS
9、I ETSI TS 134 121-1 V14.1.0 (2017-03)23GPP TS 34.121-1 version 14.1.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI memb
10、ers and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi
11、.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the
12、 present document. Foreword This Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as b
13、eing references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“,
14、 “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 121-1 V14.1.0 (2017-03)33GPP T
15、S 34.121-1 version 14.1.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 59g3Introduction 59g31 Scope 60g32 References 60g33 Definitions, symbols, abbreviations and equations 62g33.1 Definitions 62g33.2 Symbols 63g33.3 Abbreviations . 63g33.4 E
16、quations 64g34 Frequency bands and channel arrangement 66g34.1 General . 66g34.2 Frequency bands . 67g34.3 TX-RX frequency separation . 68g34.4 Channel arrangement 68g34.4.1 Channel spacing 68g34.4.2 Channel raster . 69g34.4.3 Channel number 69g34.4.4 UARFCN 71g34A Reference Conditions . 72g34A.1 Ge
17、neric setup procedures . 72g34A.2 System information 72g34A.3 Message contents 72g34A.4 Measurement configurations 73g35 Transmitter Characteristics . 73g35.1 General . 73g35.2 Maximum Output Power 74g35.2.1 Definition and applicability 74g35.2.2 Minimum Requirements . 75g35.2.3 Test purpose 76g35.2
18、.4 Method of test . 76g35.2.4.1 Initial conditions . 76g35.2.4.2 Procedure 77g35.2.5 Test requirements 77g35.2A Maximum Output Power with HS-DPCCH (Release 5 only) 78g35.2A.1 Definition and applicability 78g35.2A.2 Minimum Requirements . 78g35.2A.3 Test purpose 78g35.2A.4 Method of test . 78g35.2A.4
19、.1 Initial conditions . 78g35.2A.4.2 Procedure 79g35.2A.5 Test requirements 79g35.2AA Maximum Output Power with HS-DPCCH (Release 6 and later) 80g35.2AA.1 Definition and applicability 80g35.2AA.2 Minimum Requirements . 80g35.2AA.3 Test purpose 80g35.2AA.4 Method of test . 80g35.2AA.4.1 Initial condi
20、tions . 80g35.2AA.4.2 Procedure 81g35.2AA.5 Test requirements 81g3ETSI ETSI TS 134 121-1 V14.1.0 (2017-03)43GPP TS 34.121-1 version 14.1.0 Release 145.2AB Maximum Output Power for OLTD . 82g35.2AB.1 Definition and applicability 82g35.2AB.2 Minimum Requirements . 83g35.2AB.3 Test purpose 83g35.2AB.4
21、Method of test . 83g35.2AB.4.1 Initial conditions . 83g35.2AB.4.2 Procedure 84g35.2AB.5 Test requirements 84g35.2AC Maximum Output Power for UL CLTD activation state 1 . 86g35.2AC.1 Definition and applicability 86g35.2AC.2 Minimum Requirements . 86g35.2AC.3 Test purpose 87g35.2AC.4 Method of test .
22、87g35.2AC.4.1 Initial conditions . 87g35.2AC.4.2 Procedure 87g35.2AC.5 Test requirements 88g35.2AD Maximum Output Power for UL CLTD activation state 2 and 3 . 89g35.2AD.1 Definition and applicability 89g35.2AD.2 Minimum Requirements . 89g35.2AD.3 Test purpose 90g35.2AD.4 Method of test . 90g35.2AD.4
23、.1 Initial conditions . 90g35.2AD.4.2 Procedure 91g35.2AD.5 Test requirements 91g35.2B Maximum Output Power with HS-DPCCH and E-DCH 92g35.2B.1 Definition and applicability 92g35.2B.2 Minimum Requirements . 92g35.2B.3 Test purpose 93g35.2B.4 Method of test . 93g35.2B.4.1 Initial conditions . 93g35.2B
24、.4.2 Procedure 95g35.2B.5 Test requirements 95g35.2BA UE Maximum Output Power for DC-HSUPA (QPSK) 97g35.2BA.1 Definition and applicability 97g35.2BA.2 Minimum Requirements . 97g35.2BA.3 Test purpose 98g35.2BA.4 Method of test . 98g35.2BA.4.1 Initial conditions . 98g35.2BA.4.2 Procedure 99g35.2BA.5 T
25、est requirements 99g35.2BB UE Maximum Output Power for DC-HSUPA (16QAM) 100g35.2BB.1 Definition and applicability 100g35.2BB.2 Minimum Requirements . 101g35.2BB.3 Test purpose 102g35.2BB.4 Method of test . 102g35.2BB.4.1 Initial conditions . 102g35.2BB.4.2 Procedure 102g35.2BB.5 Test requirements 10
26、3g35.2BC Maximum Output Power with HS-DPCCH and E-DCH for OLTD 104g35.2BC.1 Definition and applicability 104g35.2BC.2 Minimum Requirements . 104g35.2BC.3 Test purpose 104g35.2BC.4 Method of test . 105g35.2BC.4.1 Initial conditions . 105g35.2BC.4.2 Procedure 107g35.2BC.4.2.1 Procedure for sub-test 1
27、to 4 . 107g35.2BC.5 Test requirements 107g35.2BD Maximum Output Power with HS-DPCCH and E-DCH for UL CLTD activation state 1 108g35.2BD.1 Definition and applicability 108g35.2BD.2 Minimum Requirements . 109g35.2BD.3 Test purpose 109g35.2BD.4 Method of test . 109g3ETSI ETSI TS 134 121-1 V14.1.0 (2017
28、-03)53GPP TS 34.121-1 version 14.1.0 Release 145.2BD.4.1 Initial conditions . 109g35.2BD.4.2 Procedure 111g35.2BD.4.2.1 Procedure for sub-test 1 to 4 111g35.2BD.5 Test requirements 112g35.2BE Maximum Output Power with HS-DPCCH and E-DCH for UL CLTD activation state 2 and 3. 113g35.2BE.1 Definition a
29、nd applicability 113g35.2BE.2 Minimum Requirements . 113g35.2BE.3 Test purpose 114g35.2BE.4 Method of test . 114g35.2BE.4.1 Initial conditions . 114g35.2BE.4.2 Procedure 116g35.2BE.4.2.1 Procedure for sub-test 1 to 4 116g35.2BE.5 Test requirements 116g35.2C UE relative code domain power accuracy 118
30、g35.2C.1 Definition and applicability 118g35.2C.2 Minimum Requirements . 118g35.2C.3 Test purpose 118g35.2C.4 Method of test . 118g35.2C.4.1 Initial conditions . 118g35.2C.4.2 Procedure 119g35.2C.5 Test requirements 120g35.2CA UE relative code domain power accuracy for OLTD . 121g35.2CA.1 Definition
31、 and applicability 121g35.2CA.2 Minimum Requirements . 121g35.2CA.3 Test purpose 121g35.2CA.4 Method of test . 121g35.2CA.4.1 Initial conditions . 121g35.2CA.4.2 Procedure 122g35.2CA.5 Test requirements 123g35.2CB UE relative code domain power accuracy for UL CLTD activation state 1 . 124g35.2CB.1 D
32、efinition and applicability 124g35.2CB.2 Minimum Requirements . 124g35.2CB.3 Test purpose 124g35.2CB.4 Method of test . 124g35.2CB.4.1 Initial conditions . 124g35.2CB.4.2 Procedure 125g35.2CB.5 Test requirements 126g35.2CC UE relative code domain power accuracy for UL CLTD activation state 2 and 3 .
33、 127g35.2CC.1 Definition and applicability 127g35.2CC.2 Minimum Requirements . 127g35.2CC.3 Test purpose 127g35.2CC.4 Method of test . 127g35.2CC.4.1 Initial conditions . 127g35.2CC.4.2 Procedure 128g35.2CC.5 Test requirements 129g35.2D UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH 1
34、30g35.2D.1 Definition and applicability 130g35.2D.2 Minimum Requirements . 130g35.2D.3 Test purpose 130g35.2D.4 Method of test . 131g35.2D.4.1 Initial conditions . 131g35.2D.4.2 Procedure 132g35.2D.5 Test requirements 133g35.2DA UE Relative Code Domain Power Accuracy for DC-HSUPA with QPSK 134g35.2D
35、A.1 Definition and applicability 134g35.2DA.2 Minimum Requirements . 134g35.2DA.3 Test purpose 134g35.2DA.4 Method of test . 135g35.2DA.4.1 Initial conditions . 135g35.2DA.4.2 Procedure 135g35.2DA.5 Test requirements 136g35.2DB UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH for OLTD 1
36、36g3ETSI ETSI TS 134 121-1 V14.1.0 (2017-03)63GPP TS 34.121-1 version 14.1.0 Release 145.2DB.1 Definition and applicability 136g35.2DB.2 Minimum Requirements . 137g35.2DB.3 Test purpose 137g35.2DB.4 Method of test . 137g35.2DB.4.1 Initial conditions . 137g35.2DB.4.2 Procedure 139g35.2DB.5 Test requi
37、rements 139g35.2DC UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH for UL CLTD activation state 1 140g35.2DC.1 Definition and applicability 140g35.2DC.2 Minimum Requirements . 141g35.2DC.3 Test purpose 141g35.2DC.4 Method of test . 141g35.2DC.4.1 Initial conditions . 141g35.2DC.4.2 Pro
38、cedure 143g35.2DC.5 Test requirements 143g35.2DD UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH for UL CLTD activation state 2 and 3 144g35.2DD.1 Definition and applicability 144g35.2DD.2 Minimum Requirements . 144g35.2DD.3 Test purpose 145g35.2DD.4 Method of test . 145g35.2DD.4.1 Ini
39、tial conditions . 145g35.2DD.4.2 Procedure 147g35.2DD.5 Test requirements 148g35.2E UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH with 16QAM . 148g35.2E.1 Definition and applicability 148g35.2E.2 Minimum Requirements . 149g35.2E.3 Test purpose 149g35.2E.4 Method of test . 149g35.2E.4
40、.1 Initial conditions . 149g35.2E.4.2 Procedure 150g35.2E.5 Test requirements 151g35.2EA UE Relative Code Domain Power Accuracy for DC-HSUPA with 16QAM . 152g35.2EA.1 Definition and applicability 152g35.2EA.2 Minimum Requirements . 152g35.2EA.3 Test purpose 152g35.2EA.4 Method of test . 153g35.2EA.4
41、.1 Initial conditions . 153g35.2EA.4.2 Procedure 153g35.2EA.5 Test requirements 154g35.2EB UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH with 16QAM for OLTD 154g35.2EB.1 Definition and applicability 154g35.2EB.2 Minimum Requirements . 155g35.2EB.3 Test purpose 155g35.2EB.4 Method of
42、test . 155g35.2EB.4.1 Initial conditions . 155g35.2EB.4.2 Procedure 156g35.2EB.5 Test requirements 157g35.2EC UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH with 16QAM for UL CLTD activation state 1 . 158g35.2EC.1 Definition and applicability 158g35.2EC.2 Minimum Requirements . 158g35
43、.2EC.3 Test purpose 159g35.2EC.4 Method of test . 159g35.2EC.4.1 Initial conditions . 159g35.2EC.4.2 Procedure 160g35.2EC.5 Test requirements 161g35.2ED UE Relative Code Domain Power Accuracy for HS-DPCCH and E-DCH with 16QAM for UL CLTD activation state 2 and 3 . 162g35.2ED.1 Definition and applica
44、bility 162g35.2ED.2 Minimum Requirements . 162g3ETSI ETSI TS 134 121-1 V14.1.0 (2017-03)73GPP TS 34.121-1 version 14.1.0 Release 145.2ED.3 Test purpose 162g35.2ED.4 Method of test . 163g35.2ED.4.1 Initial conditions . 163g35.2ED.4.2 Procedure 164g35.2ED.5 Test requirements 165g35.3 Frequency Error 1
45、65g35.3.1 Definition and applicability 165g35.3.2 Minimum Requirements . 166g35.3.3 Test purpose 166g35.3.4 Method of test . 166g35.3.4.1 Initial conditions . 166g35.3.4.2 Procedure 166g35.3.5 Test Requirements 166g35.3A Frequency Error for DC-HSUPA . 166g35.3A.1 Definition and applicability 166g35.
46、3A.2 Minimum Requirements . 167g35.3A.3 Test purpose 167g35.3A.4 Method of test . 167g35.3A.4.1 Initial conditions . 167g35.3A.4.2 Procedure 167g35.3A.5 Test Requirements 167g35.3B Frequency Error for OLTD 168g35.3B.1 Definition and applicability 168g35.3B.2 Minimum Requirements . 168g35.3B.3 Test p
47、urpose 168g35.3B.4 Method of test . 168g35.3B.4.1 Initial conditions . 168g35.3B.4.2 Procedure 169g35.3B.5 Test Requirements 169g35.3C Frequency Error for UL CLTD Activation state 1 . 169g35.3C.1 Definition and applicability 169g35.3C.2 Minimum Requirements . 169g35.3C.3 Test purpose 169g35.3C.4 Met
48、hod of test . 170g35.3C.4.1 Initial conditions . 170g35.3C.4.2 Procedure 170g35.3C.5 Test Requirements 171g35.3D Frequency Error for UL CLTD Activation state 2 and 3 171g35.3D.1 Definition and applicability 171g35.3D.2 Minimum Requirements . 171g35.3D.3 Test purpose 171g35.3D.4 Method of test . 171g
49、35.3D.4.1 Initial conditions . 171g35.3D.4.2 Procedure 172g35.3D.5 Test Requirements 172g35.4 Output Power Dynamics in the Uplink . 172g35.4.1 Open Loop Power Control in the Uplink 172g35.4.1.1 Definition and applicability . 172g35.4.1.2 Minimum requirements . 172g35.4.1.3 Test purpose 173g35.4.1.4 Method of test . 173g35.4.1.5 Test requirements 174g35.4.1A Open Loop Power Control in the Uplink for DC-HSUPA 175g35.4.1A.1 Definition and applicability . 175g35.4.1A.2 Minimum requirements . 175g35.4.1A.3 Test purpose 175g35.4.1A.4 Method of test . 175g35.4.1A.5 Test requirements
