1、 ETSI TS 136 509 V14.2.0 (2018-01) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User Equipment (UE) (3GPP TS 36.509 version 14.2.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 509 V14.2.0 (2018-01)13GPP TS 3
2、6.509 version 14.2.0 Release 14Reference RTS/TSGR-0536509ve20 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06)
3、 N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without th
4、e prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the pre
5、sent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment
6、 to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The
7、content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit
8、of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 136 509 V14.
9、2.0 (2018-01)23GPP TS 36.509 version 14.2.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and
10、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).
11、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present
12、 document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or
13、tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The prese
14、nt document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http
15、:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
16、 provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 509 V14.2.0 (2018-01)33GPP TS 36.509 version 14.2.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g3Introduction 6g
17、31 Scope 7g32 References 7g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 9g34 UE special conformance test functions 10g34.1 General description. 10g34.2 Requirements for UE support of test functions 10g35 Test Control (TC) protocol procedures and test loop operation .
18、10g35.1 General description. 10g35.2 Security protection of test control messages 29g35.3 UE test mode procedures 29g35.3.1 General 29g35.3.2 Activate UE test mode 30g35.3.2.1 General 30g35.3.2.2 Initiation 31g35.3.2.3 Reception of ACTIVATE TEST MODE message or AT Command +CATM by UE 31g35.3.3 Deact
19、ivate UE test mode . 32g35.3.3.1 General 33g35.3.3.2 Initiation 33g35.3.3.3 Reception of DEACTIVATE TEST MODE message or AT Command +CATM by UE 33g35.4 UE test loop procedures . 34g35.4.1 General 34g35.4.2 Close UE test loop 34g35.4.2.1 General 35g35.4.2.1a UE test loop mode A PDCP SDU and UE test l
20、oop mode B IP PDU buffer size requirement . 36g35.4.2.1b UE test loop mode G and UE test loop mode H buffer size, User data container size and RP-User data element size requirements . 36g35.4.2.2 Initiation 37g35.4.2.3 Reception of CLOSE UE TEST LOOP message by the UE . 37g35.4.2.4 Reception of AT C
21、ommand +CCUTLE by the UE. 42g35.4.3 UE test loop mode A operation . 43g35.4.4 UE test loop mode B operation . 45g35.4.4.1 Void. 45g35.4.4.2 Reception of IP PDUs when UE is in E-UTRA or NB-IoT mode 45g35.4.4.3 Expiry of T_delay_modeB timer when UE is in E-UTRA or NB-IoT mode 45g35.4.4.4 Reception of
22、IP PDUs when UE is in UTRA mode 46g35.4.4.5 Expiry of T_delay_modeB timer when UE is in UTRA mode . 46g35.4.4.6 Reception of IP PDUs when UE is in GSM/GPRS mode . 46g35.4.4.7 Expiry of T_delay_modeB timer when UE is in GSM/GPRS mode. 47g35.4.4.8 Reception of IP PDUs when UE is in CDMA2000 mode . 47g
23、35.4.4.9 Expiry of T_delay_modeB timer when UE is in CDMA2000 mode 47g35.4.4.10 Establishment of the RRC/RR connection in E-UTRA, NB-IoT, UTRA, GSM/GPRS and CDMA2000 mode . 47g35.4.4.11 Release of RRC/RR connection in E-UTRA, NB-IoT, UTRA, GSM/GPRS and CDMA2000 mode after T_delay_modeB timer has exp
24、ired . 48g35.4.4a UE test loop mode C operation . 48g3ETSI ETSI TS 136 509 V14.2.0 (2018-01)43GPP TS 36.509 version 14.2.0 Release 145.4.4a.1 Reception of MBMS packets 48g35.4.4a.2 Release of RRC connection. 48g35.4.4b UE test loop mode D operation . 48g35.4.4b.1 Monitor or Announce ProSe Direct Dis
25、covery . 48g35.4.4b.2 Release of RRC connection. 49g35.4.4c UE test loop mode E operation . 50g35.4.4c.1 Receive or Transmit ProSe Direct or V2X Communication . 50g35.4.4c.2 Release of RRC connection. 51g35.4.4c.3 Transition from RRC Idle/Connected to Any Cell Selection state 51g35.4.4c.4 V2X operat
26、ion. 51g35.4.4d UE test loop mode F operation . 52g35.4.4d.1 Reception of MBMS packets 52g35.4.4d.2 Release of RRC connection. 52g35.4.4e UE test loop mode G operation . 52g35.4.4e.1 Reception of ESM DATA TRANSPORT message 52g35.4.4e.2 Expiry of T_delay_modeGH timer when UE test loop mode G is activ
27、e . 53g35.4.4f UE test loop mode H operation . 53g35.4.4f.1 Reception of RP-Data message . 53g35.4.4f.2 Expiry of T_delay_modeGH timer when UE test loop mode H is active . 54g35.4.4g UE test loop mode I operation 55g35.4.4g.1 Reception of ESM DATA TRANSPORT message 55g35.4.5 Open UE test loop . 55g3
28、5.4.5.1 General 55g35.4.5.2 Initiation 56g35.4.5.3 Reception of OPEN UE TEST LOOP message or AT Command +CCUTLE by the UE 56g35.5 UE Positioning test mode procedures . 57g35.5.1 Reset UE Positioning Stored Information . 57g35.5.1.1 General 57g35.5.1.2 Initiation 57g35.5.1.3 Reception of RESET UE POS
29、ITIONING STORED INFORMATION message by UE 57g35.5.2 Update UE Location Information . 58g35.5.2.1 General 58g35.5.2.2 Initiation 58g35.5.2.3 Reception of UPDATE UE LOCATION INFORMATION message by UE . 58g35.6 MBMS Packet Counter reporting procedure 59g35.6.1 Request MBMS Packet Counter value 59g35.6.
30、1.1 General 59g35.6.1.2 Initiation 59g35.6.1.3 Reception of UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST by the UE . 59g35.7 ProSe Packet Counter reporting procedure 60g35.7.1 Request ProSe Packet Counter value 60g35.7.1.1 General 60g35.7.1.2 Initiation 60g35.7.1.3 Reception of UE TEST LOOP PROSE
31、 COUNTER REQUEST by the UE . 61g35.7.1.4 Reception of AT Command +CUSPCREQ by the UE . 61g35.8 SC-PTM Packet Counter reporting procedure 62g35.8.1 Request SC-PTM Packet Counter value . 62g35.8.1.1 General 62g35.8.1.2 Initiation 62g35.8.1.3 Reception of UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUES
32、T by the UE 62g36 Message definitions and contents . 62g36.1 CLOSE UE TEST LOOP . 63g36.2 CLOSE UE TEST LOOP COMPLETE . 68g36.3 OPEN UE TEST LOOP . 68g36.4 OPEN UE TEST LOOP COMPLETE . 68g36.5 ACTIVATE TEST MODE . 69g36.6 ACTIVATE TEST MODE COMPLETE . 69g36.7 DEACTIVATE TEST MODE . 69g36.8 DEACTIVAT
33、E TEST MODE COMPLETE . 70g36.9 RESET UE POSITIONING STORED INFORMATION 70g36.10 UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST 71g3ETSI ETSI TS 136 509 V14.2.0 (2018-01)53GPP TS 36.509 version 14.2.0 Release 146.11 UE TEST LOOP MODE C MBMS PACKET COUNTER RESPONSE 71g36.12 UPDATE UE LOCATION INFORMA
34、TION 71g36.13 UE TEST LOOP PROSE PACKET COUNTER REQUEST 73g36.14 UE TEST LOOP PROSE PACKET COUNTER RESPONSE 73g36.15 UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUEST 75g36.16 UE TEST LOOP MODE F SCPTM PACKET COUNTER RESPONSE 75g37 Variables, constants and timers 76g37.1 State variables 76g37.2 Const
35、ants 78g37.3 Timers 78g37.4 Configurable parameters 78g38 Electrical Man Machine Interface (EMMI) 79g3Annex A (informative): Void . 80g3Annex B (informative): Change history . 81g3History 84g3ETSI ETSI TS 136 509 V14.2.0 (2018-01)63GPP TS 36.509 version 14.2.0 Release 14Foreword This Technical Speci
36、fication has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG w
37、ith an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented fo
38、r all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction User Equipment (UE) Test Loop functionality is a mandatory feature to support E-UTRA / EPC conformance
39、 testing. It forms part of the core requirements and thus has a direct impact on the design of the UE. The test methods applied in RF Conformance Test Specification TS 36.521-1 27 and the test models used in Protocol Conformance Test Specifications TS 36.523-1 30 and TS 36.523-3 32 define the corres
40、ponding UE Test Loop functionality. The present specification describes the location of the data loop in the protocol stack as well as the procedure and specific messages to activate/deactivate the Test Loop functionality in the UE. ETSI ETSI TS 136 509 V14.2.0 (2018-01)73GPP TS 36.509 version 14.2.
41、0 Release 141 Scope The present document defines for User Equipment (UE) in E-UTRA FDD or TDD mode those special functions and their activation/deactivation methods that are required in UE for conformance testing purposes. This document also describes the operation of these special functions for UEs
42、 supporting E-UTRA FDD or TDD mode, when operating in UTRA FDD and TDD mode, in GSM/GPRS mode, and in CDMA2000 mode. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identifie
43、d by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference i
44、mplicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.003: “Numbering, Addressing and Identification“. 3 3GPP TS 23.122: “Non-Access-Stratum functions related to Mobile Station (MS) in
45、 idle mode“. 4 3GPP TS 23.401: “3GPP System Architecture Evolution; GPRS enhancements for E-UTRAN access“. 5 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 6 3GPP TS 24.008: “Mobile Radio Interface Layer 3 specification; Core Network Protocols; Stage 3“. 7 3GPP TR 24.8
46、01: “3GPP System Architecture Evolution; CT WG1 Aspects“. 8 3GPP TS 27.007: “AT command set for User Equipment (UE)“. 9 3GPP TS 31.101: “UICC-Terminal Interface; Physical and Logical Characteristics“. 10 3GPP TS 34.108: “Common Test Environments for User Equipment (UE) Conformance Testing“. 11 3GPP
47、TS 34.109: “Terminal logical test interface; Special conformance testing functions“. 12 3GPP TS 34.123-1: “User Equipment (UE) conformance specification; Part 1: Protocol conformance specification“. 13 3GPP TS 34.123-2: “User Equipment (UE) conformance specification; Part 2: Implementation Conforman
48、ce Statement (ICS) proforma specification“. 14 3GPP TS 34.123-3: “User Equipment (UE) conformance specification; Part 3: Abstract Test Suites (ATS)“. 15 3GPP TS 36.133: “Requirements for support of Radio Resource Management“. 16 3GPP TS 36.211: “Physical Channels and Modulation“. 17 3GPP TS 36.212:
49、“Multiplexing and Channel Coding“. 18 3GPP TS 36.300: “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2“. ETSI ETSI TS 136 509 V14.2.0 (2018-01)83GPP TS 36.509 version 14.2.0 Release 1419 3GPP TS 36.302: “Services provided by the physical layer for E-UTRA“. 20 3GPP TS 36.304: “Evolved Universal Terrestrial Radio Access (EUTRA) User Equipment (UE) Procedures in idle mode “. 21 3GPP TS 36.306: “Evolved Universal Terrestrial Radi
