FORD ESB-M4D156-A-2008 POLYETHYLENE (PE) SHEET - BLACK TO BE USED WITH FORD WSS-M99P1111-A 《黑色聚乙烯(PE)板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:figureissue185 文档编号:745479 上传时间:2019-01-14 格式:PDF 页数:2 大小:17.66KB
下载 相关 举报
FORD ESB-M4D156-A-2008 POLYETHYLENE (PE) SHEET - BLACK  TO BE USED WITH FORD WSS-M99P1111-A  《黑色聚乙烯(PE)板  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD ESB-M4D156-A-2008 POLYETHYLENE (PE) SHEET - BLACK  TO BE USED WITH FORD WSS-M99P1111-A  《黑色聚乙烯(PE)板  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 02 06 N-STATUS No replacement named G. Kowalski 2005 01 13 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.9, 3.10 ESB-M4D157-A & ESB-M4D156-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 POLYETHYLEN

2、E (PE), SHEET - BLACK ESB-M4D156-A POLYETHYLENE (PE), SHEET - CLEAR ESB-M4D157-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by these specifications is a thermoplastic sheet produced from polyethylene. 2. APPLICATION These specifications were released originally for materials used as

3、 convertible top shipping covers, seat covers, door and quarter water shields. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 COLOR ESB-M4D156-A

4、 Black ESB-M4D157-A Clear 3.4 TENSILE STRENGTH, min (ASTM D 882) WMD 12.4 MPa AMD 9 MPa Elongation, min WMD 150% AMD 300% 3.5 THICKNESS 0.10 +/- 0.008 mm Unless otherwise specified on engineering drawings ENGINEERING MATERIAL SPECIFICATIONESB-M4D156-A ESB-M4D157-APrinted copies are uncontrolled Copy

5、right 2008, Ford Global Technologies, LLC Page 2 of 2 3.6 SPECIFIC GRAVITY 0.90 - 0.96 (ASTM D 1505) 3.7 WATER VAPOR TRANSMISSION No transmission (ASTM E 96) 3.8 COLOR FASTNESS After 200 h exposure in a fadeometer or fluorescent sunlamp cabinet, as described in FLTM BN 001-01 and BO 115-01, respectively, there shall be no more than a slight change in color as observed by the unaided eye. In no case shall the color change exceed that of the approved master sample.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1