FORD ESW-M2D230-A3-2010 ELASTOMER POLYESTER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酯弹性体成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESW-M2D230-A1上》.pdf

上传人:fuellot230 文档编号:746657 上传时间:2019-01-14 格式:PDF 页数:3 大小:26.33KB
下载 相关 举报
FORD ESW-M2D230-A3-2010 ELASTOMER POLYESTER MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《聚酯弹性体成型料  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD ESW-M2D230-A1上》.pdf_第1页
第1页 / 共3页
FORD ESW-M2D230-A3-2010 ELASTOMER POLYESTER MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《聚酯弹性体成型料  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD ESW-M2D230-A1上》.pdf_第2页
第2页 / 共3页
FORD ESW-M2D230-A3-2010 ELASTOMER POLYESTER MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《聚酯弹性体成型料  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD ESW-M2D230-A1上》.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 06 25 N-STATUS No replacement named C. Mracna, NA 2004 07 27 Revised Para 3.0 inserted; para 3.4, 3.5, 3.6, 3.7, 3.8 & 4 deleted 1973 01 11 Released AC10-27 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Pag

2、e 1 of 3 ELASTOMER, POLYESTER, MOLDING COMPOUND ESW-M2D230-A1 ELASTOMER, POLYESTER, MOLDING COMPOUND ESW-M2D230-A2 ELASTOMER, POLYESTER, MOLDING COMPOUND ESW-M2D230-A3 ELASTOMER, POLYESTER, MOLDING COMPOUND ESW-M2D230-A4 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifica

3、tions are polyterephthalate ester injection molding compounds with excellent heat resistance. 2. APPLICATION These specifications were released originally for material used as transmission bellcrank grommets where toughness, vibration and shock insulation is required at elevated temperatures. ESW-M2

4、D230-A1 40 Durometer D Hardness ESW-M2D230-A2 55 Durometer D Hardness ESW-M2D230-A3 63 Durometer D Hardness ESW-M2D230-A4 72 Durometer D Hardness 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirement

5、s For Production Materials (WSS-M99P1111-A). 3.1 RAW MATERIAL 3.1.1 Specific Gravity (ASTM D 792) A1 1.17 +/- 0.03 A2 1.20 +/- 0.03 A3 1.22 +/- 0.03 A4 1.25 +/- 0.03 3.1.2 Moisture Content, max A1 through A4 0.10% 3.1.3 Flow Rate, min (ASTM D 1238, 2160 g load) A1 (190 C) 4.1 - 6.5 g/10 A2 (220 C) 1

6、4.0 - 21.0 g/10 A3 (220 C) 7.0 - 10.5 g/10 A4 (240 C) 10.5 - 15.0 g/10 ENGINEERING MATERIAL SPECIFICATIONESW-M2D230-A1/A2/A3/A4Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 3 3.2 MOLDED TEST SPECIMEN 3.2.1 Hardness, Durometer D (ASTM D 2240) A1 41 +/- 3 A2 5

7、6 +/- 3 A3 66 +/- 3 A4 70 +/- 3 3.2.2 Tensile Strength at Break, min 15.8 MPa (A1 only) (ASTM D 412, Die C, 50 mm/min test speed) Elongation, min 380% Tensile Stress at Yield, min (ASTM D 412, Die C, 50 mm/min test speed) A1 _ A2 12.4 MPa A3 16.9 MPa A4 22 MPa 3.2.3 Compression Set, max (ASTM D 395,

8、 Method A, 22 h at 70 C) A1 8% 2 3A3 % 4 23.2.4 Tear Strength, min (ASTM D 624, Die C) A1 90 kN/m A2 130 kN/m A3 160 kN/m A4 179 kN/m 3.2.5 Modulus of Elasticity (ASTM D 790, Method I, Procedure B) A1 55 - 74 MPa A2 158 - 227 MPa A3 255 - 420 MPa A4 413 - 717 MPa 3.2.6 Drop Weight Impact (-40 C, 34

9、N.m) A1 through A4 No fracture ENGINEERING MATERIAL SPECIFICATIONESW-M2D230-A1/A2/A3/A4Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 3 3.2.7 Heat Aged (ASTM D 573, 21 days at 125 C) Hardness, Durometer D Change A1 -10 to +5 A2 -5 to +10 A3 -10 to +5 A4 -5 to +10 Tensile Strength at Break Change -15 to +40% (A1 only) Elongation Change, max (A1 only) 60% Tensile Stress at Yield Change, max A1 - A2 35% A3 40% A4 35% 3.3 MOLDED PART 3.3.1 Specific Gravity (ASTM D 792) A1 1.17 +/- 0.03 A2 1.20 +/- 0.03 A3 1.22 +/- 0.03 A4 1.25 +/- 0.03

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1