FORD WRS-M1H1214-A-2010 FABRIC VOLTA S PATTERN FLAT WOVEN 100% PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《工业使用后材料比例达100%的VOLTA图案的平织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:inwarn120 文档编号:748643 上传时间:2019-01-14 格式:PDF 页数:2 大小:18.86KB
下载 相关 举报
FORD WRS-M1H1214-A-2010 FABRIC VOLTA S PATTERN FLAT WOVEN 100% PIR CONTENT  TO BE USED WITH FORD WSS-M99P1111-A  《工业使用后材料比例达100%的VOLTA图案的平织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WRS-M1H1214-A-2010 FABRIC VOLTA S PATTERN FLAT WOVEN 100% PIR CONTENT  TO BE USED WITH FORD WSS-M99P1111-A  《工业使用后材料比例达100%的VOLTA图案的平织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 1 2010 01 07 Revised Revised 3.2.2 M.Dumitrescu,NA 2009 09 22 Activated M. Dumitrescu, NA Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, VOLTA S PATTERN, FLAT WOVEN WRS-M1H1214-A 100% PIR

2、 CONTENT 1. SCOPE The material defined by this specification is a Volta S pattern, Dobby, flat woven bodycloth of good quality and uniform composition. The fabric is made of 100% PIR (Post Industrial Recycled yarn) and it is backcoated. 2. APPLICATION This specification was released originally for m

3、aterial used as a seat fabric, insert and bolster application for 2010 U377 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform

4、 to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 289 ends/10 cm Fill 190 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 350 g/m2 Backcoat 50 g/m2

5、 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Polyester Backcoating Acrylic ENGINEERING MATERIAL SPECIFICATIONWRS-M1H1214-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 t

6、ex (100% recycled polyester) x 3 Fill 16.7 tex (100% recycled polyester) x 3 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • ASTM C117-2017 Standard Test Method for Materials Finer than 75-&x3bc m (No 200) Sieve in Mineral Aggregates by Washing《采用冲洗法测定矿物集料中细于75-&x3bc m (200号)筛孔的材料的标准试验方法》.pdf ASTM C117-2017 Standard Test Method for Materials Finer than 75-&x3bc m (No 200) Sieve in Mineral Aggregates by Washing《采用冲洗法测定矿物集料中细于75-&x3bc m (200号)筛孔的材料的标准试验方法》.pdf
  • ASTM C1170 C1170M-2008 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《使用振动台测定滚动压实混凝土的稠度和密度的标准试验方法》.pdf ASTM C1170 C1170M-2008 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《使用振动台测定滚动压实混凝土的稠度和密度的标准试验方法》.pdf
  • ASTM C1170 C1170M-2014 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《用振动台测定碾压混凝土一致性和密度的标准试验方法》.pdf ASTM C1170 C1170M-2014 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《用振动台测定碾压混凝土一致性和密度的标准试验方法》.pdf
  • ASTM C1170 C1170M-2014e1 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《用振动台测定碾压混凝土一致性和密度的标准试验方法》.pdf ASTM C1170 C1170M-2014e1 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《用振动台测定碾压混凝土一致性和密度的标准试验方法》.pdf
  • ASTM C1170-2006 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《使用振动台测定滚动压实混凝土的稠度和密度的试验方法》.pdf ASTM C1170-2006 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《使用振动台测定滚动压实混凝土的稠度和密度的试验方法》.pdf
  • ASTM C1171-2005 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf ASTM C1171-2005 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf
  • ASTM C1171-2005(2011) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf ASTM C1171-2005(2011) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf
  • ASTM C1171-2015 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf ASTM C1171-2015 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf
  • ASTM C1171-2016 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf ASTM C1171-2016 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1