1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2012 11 26 Released M. Montgomery, FOE Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ROUTE, JACQUARD WOVEN, WSS-M1H1149-A1 UNLAMINATED 1. SCOPE The material defined by this specificat
2、ion is a woven Jacquard polyester face fabric. 2. APPLICATION WSS-M1H1149-A1 has been introduced as an interior trim fabric for use in the V408 Global program Model 2013, as a seat Insert supplied as a tri-laminate. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material supplier
3、s and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % tolera
4、nce (ASTM D3775) Warp 230 / 10 cm Weft 140 / 10 cm 3.2.2 Fabric Weight, +/- 10 % tolerance (FLTM BN 106-01) 330 g/m2 3.3 COMPOSITION (ASTM D629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D1244) Warp dtex 830 F 188 Air textured Weft dtex 830 F 188 Air textured ENGINEERING MATERIAL SPECIFICATI
5、ON WSS-M1H1149-A1 Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Soultion dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS - Washing - Fixing Or as approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for
6、 clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
