1、A.C.N. 006 893 232 Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2450 1 of 1 June, 2004 NAME: LUBRICANT FLUORINATED SYNTHETIC OIL, ANTI-SQUEAK THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONS
2、IBLE TO CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 1. SCOPE The material covered by this specification is a perfluoropolyether oil suitable for the lubrication of metal to metal, metal to plastic and plastic to plastic par
3、ts to reduce frictional contact. This oil is a clear colourless fluorinated synthetic oil, which is non reactive, non flammable and long lasting with a service temperature range of 36C to 204C. 2. REFERENCES HN 1000 3. APPROVAL, INSPECTION AND REJECTION Refer HN 1000, Clauses A and C. 4. HAZARDOUS MATERIALS Refer HN 1000, Clause H. 5. RESTRICTED CHEMICALS Refer HN 1000, Clause J. 6 APPROVED SUPPLIERS AND MATERIALS APPROVED SUPPLIER APPROVED MATERIAL A.S. Harrison & Co Pty Ltd Brookvale N.S.W. Australia Dupont Krytox 105 Prepared by: Maria Lasic
