ICONTEC 1593-1981 《机械产品，小型铜线》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESK-M2G298-A1-1995 ADHESIVE SILICONE TWO COMPONENT《两组分硅树脂胶粘剂》.pdf

FORD ESK-M2G298-A2-1995 ADHESIVE SILICONE TWO COMPONENT (Shown on ESK-M2G298-A1)《两组分硅树脂胶粘剂 列于标准ESK-M2G298-A1上》.pdf

FORD ESK-M2G299-A1-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 60 - 70 DEGREE C HEAT CURING MEDIUM STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《中等强度的热固化60-70℃热施涂合成橡胶密封胶粘剂 .pdf

FORD ESK-M2G299-A2-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 120 - 130 DEGREE C NON-REACTIVE TO BE USED WITH FORD WSS-M99P1111-A 《不反应的120-130℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M.pdf

FORD ESK-M2G299-A3-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 70 - 80 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化70-80℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P111.pdf

FORD ESK-M2G299-A4-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 30 - 60 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化30-60℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P11.pdf

FORD ESK-M2G299-A5-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化60-70℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P11.pdf

FORD ESK-M2G299-A6-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING LONG TERM FLEXIBLE TO BE USED WITH FORD WSS-M99P1111-A 《能长期保持柔性的热固化60-70℃热施涂合成橡.pdf

FORD ESK-M2G318-A1-1988 ADHESIVE POLYESTER - HOT MELT《热熔聚酯胶粘剂》.pdf