MSZ 3887-1965 《车床加工的半圈铣床刀具半径=1 6－20》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HG T 20570.5-1995 泵的系统特性计算和设备相对安装高度的确定.pdf

HG T 20570.6-1995 工艺系统工程设计技术规定.pdf

HG T 20570.7-1995 管道压力降计算.pdf

HG T 20570.8-1995 气-液分离器设计.pdf

HG T 20570.9-1995 设备进、出管口压力损失计算.pdf

HG T 20572-1995 化工企业给排水设计施工图内容深度统一规定.pdf

HG T 20572-2007 化工企业给排水设计施工图 内容深度统一规定.pdf

HG T 20573-1995 分散型控制系统工程设计规定.pdf

HG T 20573-2012 分散型控制系统工程设计规范.pdf