MSZ 9505-1958 《分析用苯》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 10896-5-2015 Rough-terrain trucks Safety requirements and verification Interface between rough-terrain truck and integrated personnel work platform《崎岖地形卡车 安全要求和验证 崎岖地形卡车和集成人.pdf

BS ISO 10896-6-2015 Rough-terrain trucks Safety requirements and verification Tilting operator-s cabs《崎岖地形卡车 安全要求和验证 可倾驾驶室》.pdf

BS ISO 10896-7-2016 Rough-terrain trucks Safety requirements and verification Longitudinal load moment systems《崎岖地形卡车 安全要求和验证 纵向载荷力矩系统》.pdf

BS ISO 10897-2016 Collets for tool holders with taper ratio 1 10 Collets holders nuts《锥度比为1 10的刀架夹头 夹头、刀架和螺母》.pdf

BS ISO 10898-2016 Spot drills《定心钻》.pdf

BS ISO 10904-2011 Fibre-cement corrugated sheets and fittings for roofing and cladding《屋顶和覆盖层纤维水泥波纹板及其配件》.pdf

BS ISO 10907-1-2008 Tools for moulding - Locating rings - Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)《模具 定位环 小型或中型模具内无绝热.pdf

BS ISO 10907-2-2007 Tools for moulding Locating rings Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)《铸模工具 定位环状物 小型或中型模具中安装有隔热板.pdf

BS ISO 10911-2017 Solid hardmetal end mills with cylindrical shank Dimensions《带圆柱形柄的实心硬质球端立铣刀 尺寸》.pdf