MSZ 17062-1980 《白色的概念判定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4049-003-2004 Aerospace Series Thermocouple Extension Cable Operating Temperatures between -65 Degrees C and 260 Degrees C Part 003 Single Core Nickel Chromium Nickel Al.pdf

AECMA PREN 4049-004-2004 Aerospace Series Thermocouple Extension Cable Operating Temperatures between -65 Degrees C and 260 Degrees C Part 004 Two Core Nickel Chromium Nickel Alumi.pdf

AECMA PREN 4050-1-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars Plates Forging Stock and Forgings Part 1 General Requirements Edition P 1《金.pdf

AECMA PREN 4050-2-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars Plates Forging Stock and Forgings Part 2 Performance of Test Edition P 1《金属.pdf

AECMA PREN 4050-3-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars Plates Forging Stock and Forgings Part 3 Reference Blocks Edition P 1《金属杆 板.pdf

AECMA PREN 4050-4-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars Plates Forging Stock and Forgings Part 4 Acceptance Criteria Edition P 1《金属.pdf

AECMA PREN 4051-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy Port Connection Edition P 1《航空航天系列.导管接头60度球形钛合金端口联接》.pdf

AECMA PREN 4054-1998 Aerospace Series Pipe Couplings Loose Flanges and Seals Seals in Fluorocarbon Rubber and Armature in Aluminium Alloy Technical Specification Edition P1《航空航天系列..pdf

AECMA PREN 4056-001-2002 Aerospace Series Cable Ties for Harnesses Part 001 Technical Specification Edition P 1《航空航天系列铠装用绳索系材.第001部分 技术规范.P1版》.pdf