MSZ KGST 1178-1978 《技术图纸和图例的线》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B644-2011(2017) Standard Specification for Copper Alloy Addition Agents《铜合金添加剂的标准规格》.pdf

ASTM B645-2007 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys《铝合金线性弹性平面应变断裂韧性测试的标准实施规程》.pdf

ASTM B645-2010 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys《铝合金线弹性平面-应变断裂韧性试验的标准实施规程》.pdf

ASTM B645-2010(2015) Standard Practice for Linear-Elastic Plane&ndash Strain Fracture Toughness Testing of Aluminum Alloys《铝合金线弹性平面应变断裂韧性试验的标准实施规程》.pdf

ASTM B646-2006a Standard Practice for Fracture Toughness Testing of Aluminum Alloys《铝合金断裂韧性试验的标准实施规程》.pdf

ASTM B646-2012 Standard Practice for Fracture Toughness Testing of Aluminum Alloys《铝合金断裂韧性试验标准实施规程》.pdf

ASTM B646-2017 Standard Practice for Fracture Toughness Testing of Aluminum Alloys《铝合金断裂强度试验的标准实施规程》.pdf

ASTM B647-1984(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage《用维氏硬度仪测定铝合金压痕硬度的试验方法》.pdf

ASTM B647-2010 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage《维氏硬度仪测定铝合金压痕硬度的标准试验方法》.pdf