1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-F-0.0 Former Designation: ESP-F-0.0 TITLE: Table of Contents Section F Washers CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-F-0.0 - June 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED F
3、OR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicab
4、ility of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Spring Lock Washers English Series MPAPS S-F-1.101-GS/PL Tooth Lock Washers - English Series MPAPS S-F-1.301-GS/PL Plain Washers - English Series MPAPS S-F-15.101-GS/PL Hardened Washers - English Series MPAPS S-F-16.101-GS/PL Flat Round Hole Washers for Rivets - English Series MPAPS S-F-17.101-GS/PL Felt Washers - English Series MPAPS S-F-96.101-GS/PL
