1、u m-60862 (MU) AMENDMENT 1 17 January 1969 MILWARY SPECIFICATION -VER, AIRCFUUT CANOPY . OVERHAUL, KIDIFICATION AND CONVERSION OF P/N 2218-17 TO P/N 2818-18 This amendment forms a part of Military Specification m-c-60862() dated 10 April 1968. Paragraph 2.1 Under STANDARDS: Delete “MI LSTD-639 - Sur
2、face Roughness Values Preferred for Army _. ; .-=a .A Ordnance Materiel“ Following the parenthetical note of paragraph 2.1, add the following: “2.2 Other publications.- The following document forms a part of this specification to the extent specified herein. indicated, the issue in effect on date of
3、 invitation for bids or request for proposal shall apply. Unless otherwise ASA 46.1 - Surface Texture (Application for copies should be addressed to the American Standards Association, 10 East 40th Street, New York, N.Y. 10016) Paragraph 4.3.3: Delete and substitute: “4.3.3 Air firiw test.- Utilize
4、the air firing test fixture specified in T.O. il?%-11-3. Prior to test, disassemble the remover as specified in Paragraph 3-1, j . re-assemble. An air pressure hose shall be connected to the fixture to actuate the remover under test. . used to measure the pressure exerted to actuate the remover unde
5、r test. The pressure sensitive device shall be inserted into the system by means of a Tee coupling between the remover and the hose connection. shall be tested in accordance with the functional requirements of 3.4.3 and T.O. ilP4-11-3 and the results recorded,“ Remove retaining pin P/N 2218-111 and A pressure sensitive device shall be The remover Custod5.m : Army - MU Preparing Activity: Army - Mu Project No. 1377-A331 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
