1、*USACE / NAVFAC / AFCESA / NASA UFGS-12 22 00 (August 2010)-Preparing Activity: NAVFAC SupersedingUFGS-12 22 00 (July 2007) UFGS-12 22 00.00 20 (April 2006)UFGS-12 20 00 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSD
2、IVISION 12 - FURNISHINGSSECTION 12 22 00CURTAINS AND DRAPES08/10PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 Drawings1.4 SYSTEM REQUIREMENTS1.5 SUSTAINABLE DESIGN CERTIFICATION1.6 DELIVERY, STORAGE, AND HANDLINGPART 2 PRODUCTS2.1 MATERIALS2.1.1 Fabrics2.1.1.1 Drapery Fabric2.1.1.2 Drapery Lining2.1
3、.1.3 Flame Resistance2.1.2 Sewing Thread2.1.3 Heading2.1.3.1 Heading Hooks2.1.3.2 Snap-Tape System (Ripplefold)2.1.4 Drapery Hardware2.1.4.1 Track Sets2.1.4.2 Rod Sets2.1.4.3 Traverse Cord2.1.4.4 Hand Traverse Cordless Track System2.1.4.5 Motor and Controller2.1.4.6 Snap-Tape System Track2.1.5 Faste
4、ners2.2 FABRICATION2.2.1 Drapery Fabrication2.2.1.1 Panels2.2.1.2 Headings2.2.1.3 Seams2.2.1.4 HemsSECTION 12 22 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.2.2 Lining Fabrication2.2.3 Tie-Backs2.2.4 ValancesPART 3 EXECUTION3.1 EXAMINA
5、TION3.2 INSTALLATION3.2.1 Hardware3.2.2 Draperies3.2.3 Valances3.3 DRAPERY SCHEDULE3.3.1 IDENTIFICATION- End of Section Table of Contents -SECTION 12 22 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-12
6、22 00 (August 2010)-Preparing Activity: NAVFAC SupersedingUFGS-12 22 00 (July 2007) UFGS-12 22 00.00 20 (April 2006)UFGS-12 20 00 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION 12 22 00CURTAINS AND DRAPES08/10*NOTE: This guide specific
7、ation covers the requirements for draperies, drapery hardware, and installation.Note: Use Section 12 21 00 for WINDOW BLINDSNote: Use Section 12 24 13 for ROLLER WINDOW SHADESEdit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, c
8、hoose applicable item(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.This guide specification includes tailoring options for Motorized Drapery Rods. Selection or deselection of a tailoring option (selec
9、t view-tailoring options) will include or exclude that option in the section. Specific project editing is still required for the resulting section.Motorized drapery systems must be coordinated with electrical and HVAC systems (energy conservation measures), as well as the drapery manufacturer to ver
10、ify weight and related carrying hardware.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of Technical Proponents, including their organization designation and telephone number, is on the Internet.Recom
11、mended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*SECTION 12 22 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*NOTE: On the drawings, show:1. Windows and other locations requiring drapery. Indicate whether dr
12、apery extends to ceiling or to specific height above windows.2. Location of each different drapery fabric when more than one type, pattern or color is to be provided.3. Width of window and width of drapery extension if bay window.4. Location of sample window installation, if appropriate.5. Indicate
13、draw direction when one-way draw traverse rods or tracks are to be provided.6. Indicate motor location and any integrated components or accessories.*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are r
14、eferred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Al
15、so use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part
16、of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM D 3691/D 3691M (2009) Woven, Lace, and Knit Household Curtain and Drapery FabricsSECTION 12 22 00 Page 4Provided by IHSNot for ResaleNo reprodu
17、ction or networking permitted without license from IHS-,-,-GREENGUARD ENVIRONMENTAL INSTITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 701 (2010) Standard Methods of Fire Tests for Flame Propagation of Textiles and FilmsSCIENTIFIC CERTIFI
18、CATION SYSTEMS (SCS)SCS Scientific Certification Systems (SCS)Indoor Advantage1.2 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to
19、the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Qu
20、ality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the app
21、roving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes foll
22、owing the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“
23、 designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop Draw
24、ingsSECTION 12 22 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Drawings;GSD-03 Product DataCertificationSD-04 SamplesDrapery fabric; GSubmit a range of three samples, 900 by 900 mm 36 by 36 inches or larger, to match the fabric quality, w
25、eight, pattern, and color shown or specified. Once selected, label approved samples to identify locations for their use in the project. Maintain identification and approval markings until final acceptance of the work.Motor and Controller; G*NOTE: Coordinate with the drapery hardware specified for th
26、e project. Should the designer choose to indicate the location for the sample window installation, clearly indicate the location on the project drawings and edit the paragraph accordingly.*Finished draperyProvide one full size window sample installation including hardware. Install the finished drape
27、ry on a stationary traverse rod or track at the location indicated.SD-06 Test ReportsFlame resistanceSD-08 Manufacturers InstructionsDrapery hardwareMotor and ControllerSpecial fabricationBefore fabrication, submit the manufacturers printed instructions for fabrics requiring special fabrication meth
28、ods.SD-10 Operation and Maintenance DataDrapery system, Data Package 1; GMotor and ControllerSubmit in accordance with Section 01 78 23 OPERATION AND MAINTENANCE DATA.SECTION 12 22 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.3 Drawings
29、Submit drawings indicating:Windows and other locations requiring draperyextent of drapery, to ceiling or to specific height above windows;location of each different drapery fabric when more than one type,pattern or color is to be provided;width of window and width of drapery extension if bay window.
30、indicate Motor and Controller location and any integrated components or accessories.1.4 SYSTEM REQUIREMENTSSubmit data for completed drapery system in accordance with Section 01 78 23OPERATION AND MAINTENANCE DATA. Include laundering and dry cleaning instructions for fabrics requiring special care.
31、Furnish separate instruction sheet for each material (one for fiberglass, one for Verel, etc.). For fabrics which are not permanently or inherently flame resistant, furnish instruction to include frequency and process required for retreating the fabric to renew the effectiveness of the flame resista
32、nt treatment. Head each sheet with name and number of room or rooms in which each material is hung. In lieu of instruction sheets, provide instructions on small, permanent labels (either iron-on type or sewn-on) affixed to back of the heading of each panel.1.5 SUSTAINABLE DESIGN CERTIFICATIONProduct
33、 shall be third party certified by GEI Greenguard Indoor Air Quality Certified, SCS Scientific Certification Systems Indoor Advantage or equal. Certification shall be performed annually and shall be current.1.6 DELIVERY, STORAGE, AND HANDLINGDeliver draperies and hardware to the site in sealed conta
34、iners clearly labeled with manufacturers name and contents. Store in a safe, dry, clean, and well ventilated area. Do not open containers until needed for installation, unless verification inspection is required.PART 2 PRODUCTS2.1 MATERIALS2.1.1 Fabrics2.1.1.1 Drapery Fabric*NOTE: Generic descriptio
35、ns are preferred in order to promote competition. However, due to variety of fabrics available, manufacturers names and designations may be the more practical method of describing desired fabrics. When a manufacturers name and designation are used, add the following note to text: “Manufacturers name
36、 and fabric designation are provided to identify the fabric weight, pattern, weave, texture, and color desired. Other manufacturers products meeting the SECTION 12 22 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-requirements specified and
37、 having similar fabric weight, pattern, weave, texture, and color will be acceptable.“When project requires matching a standard sample, include last sentence. Make fabric sample available at location stated for inspection by prospective bidders when special fabrics are required.If more than one fabr
38、ic is required, repeat the listing as necessary.*ASTM D 3691/D 3691M. Provide fabric manufactured from man-made or natural fibers. Fabric physical characteristics must be as indicated. follows:a. Finished fabric weight: _ to _ kilograms per square meter ounces per square yardb. Pattern: Printed Wove
39、n _c. Weave: Open (25.1 to 50 percent) Semi-open (7.1 to 25 percent) Closed (0 to 7 percent)d. Texture: Burlap Smooth Twill _e. Color: _f. Shading coefficient (single glass with drapery): _A sample of each drapery fabric to be matched is on display at _.2.1.1.2 Drapery Lining*NOTE: Delete this parag
40、raph if unlined draperies are specified. Other lining fabrics may be specified in the blank space provided. Specify lining color.*Insulated, soft blackout, _, color _ as indicated.2.1.1.3 Flame Resistance*NOTE: NFPA 701 includes small and large scale test procedures. The large scale test is more sev
41、ere than the small scale test. NFPA 701 provides for optional use at the discretion of the authority having jurisdiction. National Fire Protection Association 101, “Code for Safety to Life from Fire in Buildings and Structures“, requires both tests for fabrics used in assembly, educational, health c
42、are, detention and correctional, and residential occupancies.For other occupancies, the large scale test should SECTION 12 22 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-be specified only when stringent flame resistance requirements are
43、necessary, or when the nature of the fabric specified is such that excessive melting or shrinkage will render the small scale test ineffective. Otherwise, the small scale test requirements are adequate in most cases.A variety of flame-retardant treatments are available. Generally, they fall into two broad categories: (1) permanent type, and (2) the less expensive, renewable type. Permanent treatments retain their effectiveness through a number of cleanings without reapplication. Renewable treatments, however, must b
