NEN 5454-3-1961 Nomenclature for metalworking operations Shearing《金属加工操作命名 剪切》.pdf

相关资源

SH T 0665-1998 润滑剂和有关产品（L类）—M组（金属加工）—制定标准的导则.pdf

GB T 32812-2016 金属加工液 有害物质的限量要求和测定方法.pdf

DB11 T 133-2001 金属加工设备修理通用技术条件.pdf

GB T 7631.5-1989 润滑剂和有关产品(L类)的分类 第5部分 M组(金属加工).pdf

SH T 0665-1998 润滑剂和有关产品(L类)―M组(金属加工)―制定标准的导则.pdf

GB T 32812-2016 金属加工液 有害物质的限量要求和测定方法.pdf

ASTM D4627-2012(2017) Standard Test Method for Iron Chip Corrosion for Water&x2013 Miscible Metalworking Fluids《水溶性金属加工液的铁片腐蚀用标准试验方法》.pdf

STAS 10114-1991 Non-emulsifyable oils for metals working P1H P1A and P1B Oils《用于金属加工的非乳化油 P1H，P1A和P1B油 》.pdf

ANSI ASTM E2523-2013 Standard Terminology for Metalworking Fluids and Operations《金属加工液和操作的术语》.pdf

STAS 5943-1981 METALS WORKING BY DEFORMA- TION AND SEGREGATION Glossary of terms《变形和偏析金属加工 术语表》.pdf

猜你喜欢

ASTM D3732-1982(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings《报告紫外线固化涂层固化时间的标准实施规程》.pdf

ASTM D3734-2005 Standard Specification for High-Flash Aromatic Naphthas《高闪点芳烃石脑油的标准规范》.pdf

ASTM D3734-2005(2010) Standard Specification for High-Flash Aromatic Naphthas《高闪点芳烃石脑油的标准规范》.pdf

ASTM D3735-2007 Standard Specification for VMP Naphthas《VMP石油脑的标准规范》.pdf

ASTM D3735-2007(2012) Standard Specification for VM&P Naphthas《VMamP石油脑的标准规格》.pdf

ASTM D3737-2007 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)《确定层状结构胶合板允许特性的标准实施规范》.pdf

ASTM D3737-2008 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam).pdf

ASTM D3737-2009 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)《确定结构级胶合叠板允许特性的标准实施规程》.pdf

ASTM D3737-2009e1 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)《确定结构级胶合叠层木材的允许特性的标准实施规程》.pdf