NF C04-730-1968 Labelling of laundry washing machines Nominal capacity 《洗衣机的标志 标称容量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS51073 REV A VALID NOTICE 4-2011 Light Dome 24-Volt DC.pdf

DLA MS51073 REV A-1982 LIGHT DOME 24 VOLT DC《24伏直流电圆屋顶灯》.pdf

DLA MS51092 REV C-2011 WASHER FLAT.pdf

DLA MS51099 REV B NOTICE 3-1999 SCREW CAP HEXAGON HEAD (FINISHED HEXAGON BOLT) HEAD DRILLED FOR LOCKING WIRE STEEL CORROSION-RESISTING PASSIVATED UNC-2A《UNC－2A钝化抗腐蚀钢锁线钻孔机头精巧六角形螺钉六角.pdf

DLA MS51099 REV B VALID NOTICE 1-1988 SCREW CAP HEXAGON HEAD (FINISHED HEXAGON BOLT) HEAD DRILLED FOR LOCKING WIRE STEEL CORROSION-RESISTING PASSIVATED UNC-2A《UNC－2A钝化抗腐蚀钢锁线钻孔机头精巧六.pdf

DLA MS51099 REV B VALID NOTICE 2-1996 SCREW CAP HEXAGON HEAD (FINISHED HEXAGON BOLT) HEAD DRILLED FOR LOCKING WIRE STEEL CORROSION-RESISTING PASSIVATED UNC-2A《UNC－2A钝化抗腐蚀钢锁线钻孔机头精巧六.pdf

DLA MS51099 REV B VALID NOTICE 4-2004 SCREW CAP HEXAGON HEAD (FINISHED HEXAGON BOLT) HEAD DRILLED FOR LOCKING WIRE STEEL CORROSION-RESISTING PASSIVATED UNC-2A《UNC－2A钝化抗腐蚀钢锁线钻孔机头精巧六.pdf

DLA MS51099 REV B-1969 SCREW CAP HEXAGON HEAD (FINISHED HEXAGON BOLT) HEAD DRILLED FOR LOCKING WIRE STEEL CORROSION-RESISTING PASSIVATED UNC-2A《UNC－2A钝化抗腐蚀钢锁线钻孔机头精巧六角形螺钉六角形头螺帽》.pdf

DLA MS51100 REV B NOTICE 2-1999 SCREW CAP HEXAGON HEAD (FINISHED HEXAGON BOLT) HEAD DRILLED FOR LOCKING WIRE STEEL CORROSION-RESISTING PASSIVATED UNF-2A《UNF－2A钝化抗腐蚀钢锁线钻孔机头精巧六角形螺钉六角.pdf