NF C42-164-1998 Inductive voltage dividers 《感应电压分压器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6023-2015 1764 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料 (CLSM) 的密度.pdf

ASTM D6023-2016 red 5338 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的.pdf

ASTM D6024 D6024M-2015 8935 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《采用球落在可控制的低强度材料 (CLSM) 上的方法测定.pdf

ASTM D6024 D6024M-2016 red 6109 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性.pdf

ASTM D6024-2002 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性的标准试验方法》.pdf

ASTM D6024-2007 752 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《在受控低强度材料上方进行球落体运动确定道路建筑适宜性的标准试验方法》.pdf

ASTM D6026-2006 Standard Practice for Using Significant Digits in Geotechnical Data《在土工学数据中使用有效数字的标准实施规程》.pdf

ASTM D6026-2013 red 7302 Standard Practice for Using Significant Digits in Geotechnical Data《在土工学数据中使用有效数字的标准实施规程》.pdf

ASTM D6027 D6027M-2015 8959 Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes《校准岩土工程使用线性位移传感器的标准实施规程》.pdf