NF M60-326-2006 Nuclear energy - Nuclear fuel technology - Waste - Determination of tritiated water effective diffusion coefficient in confining materials 《核能 核燃料技术 废料 约束层材料氚水的有效扩散.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E66-507-1985 Basic quantities in cutting and grinding Forces energy power 《却学和磨削的基本数值 力、能量和功率》.pdf

NF E66-508-1991 Basic quantities in cutting and grinding Part 5 basic terminology for grinding processes using grinding wheels 《切割和磨削的基本量 第5部分 砂轮磨削工艺的基本术语》.pdf

NF E66-511-1989 Tool life testing in milling Part 1 face milling 《铣刀寿命试验 第1部分 平面铣削加工》.pdf

NF E66-512-1989 Tool life testing in milling Part 2 end milling 《铣刀寿命试验 第2部分 端铣削加工》.pdf

NF E66-520-1-1997 Working zones of cutting tools Couple tool-material Part 1 general presentation 《切削工具的工作区 耦合工具材料 第1部分 概述》.pdf

NF E66-520-2-1997 Working zones of cutting tools Couple tool-material Part 2 general description 《切削工具的工作区 耦合工具材料 第2部分 一般描述》.pdf

NF E66-520-3-1997 Working zones of cutting tools Couple tool-material Part 3 application to turning technology 《切削工具的工作区 耦合工具材料 第3部分 在车削工艺上的应用》.pdf

NF E66-520-4-1997 Working zones of cutting tools Couple tool-material Part 4 couple tool-material metodology procedures in turning 《切削工具的工作范围 耦合工具材料 第4部分 车削耦合工具材料分类研究方法》.pdf

NF E66-520-5-1999 Working zones of cutting tools Couple tool-material Part 5 application to milling technology 《切削工具的工作区 耦合工具材料 第5部分 在铣削技术上的应用》.pdf